Replies continued
HomeboyYellow - Belgium · Dec 23, 2008#51Welcome Nico! And your English is pretty good too! 😉
Regarding the tail lights and the chiptuning, can you give me more information about these two items? Where have you bought those tail lights? I assume they are 'plug and play'? And where did you go for the chip tuning?
You car is very nice! 👏
Nico4960Belgium · Dec 23, 2008#52Well for the tail light search on e-bay (here it is the seller
http://stores.ebay.com/City-Lights-Inc but you can find others).
They are not plug and play and you must make some modifications because this tail light come from Asian and they don't have same connection as us... (If you need help tell me, I can explain you it's very easy...!)
Picture not included in this copy For the chip tuning here it is
http://www.ptronic.be/ I now, it's cheap but now with my 117HP (+25% torque) it's very cool and more pleasant 🎉
You want to change for "40mm lowering" be carreful in Belgium you cannot exceed 30mm for lowering springs... If you want more, you must take adjustable suspension...!
andriesThread starterSpain · Dec 23, 2008#53Hey mensen, leuk te zien dat er hier redelijk wat forum activiteit is. Dat kan ik van de andere aangemaakte forums niet zeggen. Laten we zo doorgaan.
Ik heb weer een speeltje voor de TS besteld. Een armsteun. Partnummer was bij dealer wel bekent maar ze konden hem niet bestellen. Dus zelf maar gedaan in de USA. Zal wel begin januari zijn voordat hij er is zo met al die feestdagen.
Ook zit er een K&N 57i CAI aan te komen. Moet nog ff tot januari wachten. Dan spreek ik mijn "tussenpersoon" en heb ik hem waarschijlijk voor weinig euros.
Nice to see here a lot off forum-activity. Better than on the other sub forums from Europe. Let's continue this way.
Merry Christmas to everyone Picture not included in this copyPicture not included in this copy
HomeboyYellow - Belgium · Dec 24, 2008#54It is indeed very positive to see some action over here! 😉
Andries, regarding the arm rest for your car, you could have asked me... I work at TPCE (Toyota Parts Centre Europe), and as I have a Yaris myself, I get 20% discount on all Yaris XP9 parts and accessories. 😉
Are there some people over here who are perhaps interested in a coilover kit (KW, H&R,...) for the Yaris? The more we are, the better the price we can get. 🙂
andriesThread starterSpain · Dec 24, 2008#55 Originally Posted by
Homeboy ↑ It is indeed very positive to see some action over here! 😉
Andries, regarding the arm rest for your car, you could have asked me... I work at TPCE (Toyota Parts Centre Europe), and as I have a Yaris myself, I get 20% discount on all Yaris XP9 parts and accessories. 😉
Are there some people over here who are perhaps interested in a coilover kit (KW, H&R,...) for the Yaris? The more we are, the better the price we can get. 🙂
Oke. Bedankt.
Maar het bestelnummer stond wel in de onderdelen lijst maar niet leverbaar in NL ook niet via de importeur. Dus maar via E-bay. (en dat is denk ik nog goedkoper)
het partnumber is PN-PTS32-52060. Was die door jou aan te komen en zo ja wat had hij dan gekost?
Enne BTW;waarom heb je dan je Sway Bar niet bij TPCE besteld? die heeft een officieel Toyota partnumber.(PTR11-52071)
greeetttttzzz
Andries
JochenGullegem - Belgium · Dec 24, 2008#56 Originally Posted by
Homeboy ↑ I work at TPCE (Toyota Parts Centre Europe), and as I have a Yaris myself, I get 20% discount on all Yaris XP9 parts and accessories. 😉
Dat is wel interessant 🙂
Telt de TTE-dakspoiler hier dan ook bij? Hoeveel zou deze kosten en is dit in koetswerkkleur (1F8) geleverd? Ik ben hier *misschien* in geïnteresseerd.
mi0Belgium · Dec 24, 2008#57 Originally Posted by
Homeboy ↑ It is indeed very positive to see some action over here! 😉
Andries, regarding the arm rest for your car, you could have asked me... I work at TPCE (Toyota Parts Centre Europe), and as I have a Yaris myself, I get 20% discount on all Yaris XP9 parts and accessories. 😉
Are there some people over here who are perhaps interested in a coilover kit (KW, H&R,...) for the Yaris? The more we are, the better the price we can get. 🙂
Ook toevallig, mijn vader werkt ook bij TPCE in Diest.🙂
Nico4960Belgium · Dec 24, 2008#58 Are there some people over here who are perhaps interested in a coilover kit (KW, H&R,...) for the Yaris? The more we are, the better the price we can get.
Very interresting but too late for me 😢 I have also TTE lowering springs, perhaps when I will have to change all the suspensions...
And don't forget, somebody is interested by the purchase of this kit with me ?
->
Link to a thread or page that is not in the archive <-
PS : If you speak all the time NL, I don't understand...! 🤷
Black YarisToledo, OH · Dec 24, 2008#59 Originally Posted by
Nico4960 ↑ Here it is :
Picture not included in this copy
Picture not included in this copy
you ride looks a lot like mine did..... before it got rear ended at 74mph
Picture not included in this copy Picture not included in this copy puetato89orlando · Dec 24, 2008#60was yours a hit and run 2👎
sorry still a little pissed
JochenGullegem - Belgium · Dec 25, 2008#61 Originally Posted by
Nico4960 ↑
PS : If you speak all the time NL, I don't understand...! 🤷
I asked how much a TTE-roofspoiler would cost.
Yours is probably from TTE? How much did you pay?
Nico4960Belgium · Dec 25, 2008#62I do not know any more because it was included in the price of the car…
HomeboyYellow - Belgium · Dec 25, 2008#63 Originally Posted by
andries ↑ Oke. Bedankt.
Maar het bestelnummer stond wel in de onderdelen lijst maar niet leverbaar in NL ook niet via de importeur. Dus maar via E-bay. (en dat is denk ik nog goedkoper)
het partnumber is PN-PTS32-52060. Was die door jou aan te komen en zo ja wat had hij dan gekost?
Enne BTW;waarom heb je dan je Sway Bar niet bij TPCE besteld? die heeft een officieel Toyota partnumber.(PTR11-52071)
greeetttttzzz
Andries
TRD pieces are not in stock at TPCE and have to be shipped to us. For the price of the arm rest, I have to check at my dealer.
HomeboyYellow - Belgium · Dec 25, 2008#64 Originally Posted by
mi0 ↑ Ook toevallig, mijn vader werkt ook bij TPCE in Diest.🙂
Perhaps, you can send me the name of your dad by pm? Maybe I know him... 🙂
HomeboyYellow - Belgium · Dec 25, 2008#65 Originally Posted by
Jochen ↑ I asked how much a TTE-roofspoiler would cost.
Yours is probably from TTE? How much did you pay?
I already informed for the TTE springs : it will cost 350 - 400 EUR (placing included).
For the TTE-roofspoiler, I have to check.
For your information: I don't know any dealer prices. This is something I have to check at my dealer. 😉
Nico4960Belgium · Dec 27, 2008#66JochenGullegem - Belgium · Dec 28, 2008#67 Originally Posted by
Nico4960 ↑
I'm on it...I think. It's not working properly now.
HomeboyYellow - Belgium · Dec 28, 2008#68I have added myself on the map! 🙂
andriesThread starterSpain · Dec 28, 2008#69 Originally Posted by
Homeboy ↑ I have added myself on the map! 🙂
+1 😉
Nico4960Belgium · Dec 28, 2008#70 Originally Posted by
Jochen ↑ I'm on it...I think. It's not working properly now.
Don't work for you... Retry...!
andriesThread starterSpain · Dec 28, 2008#71 Originally Posted by
Nico4960 ↑ Don't work for you... Retry...!
By me it also not working very well🍻
(The map is not visible. Maybe it's depending on what browser we use. I use Google Chrome)
JochenGullegem - Belgium · Dec 28, 2008#72 Originally Posted by
andries ↑ By me it also not working very well🍻
(The map is not visible. Maybe it's depending on what browser we use. I use Google Chrome)
I tried chrome, firefox and explorer. The map isn't working on any of them. It worked when I added myself, but then it became unavailable.
I can see myself (also with 3 browsers) so normally I'm on it.
Nico4960Belgium · Dec 28, 2008#73 Originally Posted by
Jochen ↑ I can see myself (also with 3 browsers) so normally I'm on it.
Strange because I dont' see you 🤷 I just see 3 owners in Belgium (Nico4960 - Homeboy - Tsportman)
Andries i see you very well 👍
JochenGullegem - Belgium · Dec 28, 2008#74Strange it's not showing up for you.
This is what I see...
Picture not included in this copy
HomeboyYellow - Belgium · Dec 29, 2008#75 Originally Posted by
Nico4960 ↑ You want to change for "40mm lowering" be carreful in Belgium you cannot exceed 30mm for lowering springs... If you want more, you must take adjustable suspension...!
Nico, just 1 small question: why is lowering of -40mm a problem? I know that if you go lower than 40mm, you need adapted shocks. A coilover kit is always the best way to lower a car, but here in Belgium, you have the choice between KW and H&R (because of the paperwork we need for GOCA). But they cost minimum 1400 EUR (without placing costs). A bit expensive, compared to lowering springs only.
Therefore, if we can order several coilover kits together, the price might drop a bit... 🙂
If not, i will go for lowering springs only.
JochenGullegem - Belgium · Dec 29, 2008#76Mine is also already lowered (H&R) but only with springs because of what you say, coilover kits are expensive.
I bought mine for 200€, I could also buy V-maxx for about 130€, it goes a little lower and also with papers. But I chose H&R just because I think it's better quality.
HomeboyYellow - Belgium · Dec 29, 2008#77I have had V-maxx springs on my previous car, a Citroën C2, and I was very surprised about them in the positive way. They were pretty hard, but the road-holding qualities were extremely well!
That's why I'm considering to purchase them again for the Yaris now. In combination with the Tanabe strutbar and TRD swaybar, I think they will perform well.
Are you satisfied with the H&R-springs? Are they soft, medium or hard? And do you feel that the handling has improved?
Nico4960Belgium · Dec 30, 2008#78 Originally Posted by
Homeboy ↑ Nico, just 1 small question: why is lowering of -40mm a problem?
I think but i'am not really sure in Belgium (GOCA) you cannot exceed -30mm with only lowering spring and also the car should not exceed 9cm compared to the ground...!
http://www.how2tune.be or phone to GOCA for more informations 👍
Homeboy do you see Jochen?
http://www.frappr.com/yarisowners I don't see it...!
HomeboyYellow - Belgium · Dec 30, 2008#79GOCA doesn't say anything about the springs you use. The only rule they have / use, is that the car may not be lower than 9cm from the ground (bodykits not included), with the driver in the car. Otherwise, it is 11cm without the driver. So, I think that 40mm shouldn't be any problem.
And no, I can't see Jochen either onto the map.
andriesThread starterSpain · Dec 31, 2008#80Hey, all BENELUX Yaris owners.
All the best wishes for the new year and many safe miles with you Yaris and that 2009 may bring a lot of nice mods to our cars.👏
Picture not included in this copyPicture not included in this copyPicture not included in this copy
HomeboyYellow - Belgium · Jan 1, 2009#81 Originally Posted by
andries ↑ Hey, all BENELUX Yaris owners.
All the best wishes for the new year and many safe miles with you Yaris and that 2009 may bring a lot of nice mods to our cars.👏
Picture not included in this copyPicture not included in this copyPicture not included in this copy
Amen to that, Andries!
I wish you also all the best for 2009, and I hope that we can organize a meet & greet this year. 😎
JochenGullegem - Belgium · Jan 2, 2009#82 Originally Posted by
Homeboy ↑ I have had V-maxx springs on my previous car, a Citroën C2, and I was very surprised about them in the positive way. They were pretty hard, but the road-holding qualities were extremely well!
That's why I'm considering to purchase them again for the Yaris now. In combination with the Tanabe strutbar and TRD swaybar, I think they will perform well.
Are you satisfied with the H&R-springs? Are they soft, medium or hard? And do you feel that the handling has improved?
I can't really remember how it was with the standard springs, so I don't know the difference. I feel a lot of holes and bumps but I have lowered my car just for the looks.
I still don't get it why they make cars look like a buggy.
BurningbjornBerkel en rodenrijs, the Netherlands · Jan 3, 2009#83Hey,
Zit al een tijdje op het forum maar zie nu pas het benelux gedeelte!
Goed bezig! Zijn er nog Beneluxers die ook een 1.3 rijden?
Zit er aan te denken om hem wat te verlagen.
Hoeveel raden jullie aan? er liggen 16 inch velgen met 205/50 banden onder
Hier 2 foto's van mijn Yaris 1.3 Cool + Sportpack + Ipod icelink
Picture not included in this copy
Picture not included in this copy
andriesThread starterSpain · Jan 3, 2009#84Hey.
Met originele dempers zou ik nooit verder gaan dan 3 a 3,5 cm.
Wil je niet dat je comfort veel minder wordt ga dan voor Eibach (als je de verlagingsveren van Toyota zelf neemt is dat ook Eibach)
Nico4960Belgium · Jan 3, 2009#85 Originally Posted by
Burningbjorn ↑ Hey,
Zit al een tijdje op het forum maar zie nu pas het benelux gedeelte!
Goed bezig! Zijn er nog Beneluxers die ook een 1.3 rijden?
Zit er aan te denken om hem wat te verlagen.
Hoeveel raden jullie aan? er liggen 16 inch velgen met 205/50 banden onder
Hier 2 foto's van mijn Yaris 1.3 Cool + Sportpack + Ipod icelink
Picture not included in this copy
Picture not included in this copy
Welcome... Go here, need more benelux owners 👍
http://www.frappr.com/yarisowners andriesThread starterSpain · Jan 3, 2009#86@Nico4960; Frappr works today😉
JochenGullegem - Belgium · Jan 3, 2009#87 Originally Posted by
andries ↑ @Nico4960; Frappr works today😉
Am I already on it? Now I don't see Nico and Homeboy anymore 😕
andriesThread starterSpain · Jan 3, 2009#88 Originally Posted by
Jochen ↑ Am I already on it? Now I don't see Nico and Homeboy anymore 😕
It works not again here. I delete my frappr account!
Nico4960Belgium · Jan 3, 2009#89 Originally Posted by
andries ↑ I delete my frappr account!
No... I now this map have some problems but stay...!
BurningbjornBerkel en rodenrijs, the Netherlands · Jan 4, 2009#90 Originally Posted by
andries ↑ Hey.
Met originele dempers zou ik nooit verder gaan dan 3 a 3,5 cm.
Wil je niet dat je comfort veel minder wordt ga dan voor Eibach (als je de verlagingsveren van Toyota zelf neemt is dat ook Eibach)
Top bedankt voor je Tip 😉
Wel vreemd dat de Eibach veren bij bv verlagins-veren.nl 171 euro kosten.
en als je ze via toyota zou doen het 452 euro zou kosten.
De Eibach veren zijn trouwens een verlaging van 2,5cm rondom, denk dat dat een mooie verlaging is. (niet te laag en niet te hoog).
EDIT!
Even een photoshop gemaakt van een verlaging van 2,5 cm! Staat super!
VOOR
Picture not included in this copy NA
Picture not included in this copy andriesThread starterSpain · Jan 4, 2009#91 Originally Posted by
Burningbjorn ↑ Top bedankt voor je Tip 😉
Wel vreemd dat de Eibach veren bij bv verlagins-veren.nl 171 euro kosten.
en als je ze via toyota zou doen het 452 euro zou kosten.
De Toyota prijs is inclusief montage
JochenGullegem - Belgium · Jan 4, 2009#92 Originally Posted by
Burningbjorn ↑ Top bedankt voor je Tip 😉
Wel vreemd dat de Eibach veren bij bv verlagins-veren.nl 171 euro kosten.
en als je ze via toyota zou doen het 452 euro zou kosten.
De Eibach veren zijn trouwens een verlaging van 2,5cm rondom, denk dat dat een mooie verlaging is. (niet te laag en niet te hoog).
Ik heb H&R veren, die zijn ook niet zo duur, en verlagen ongeveer 3,5 cm. Zo vind ik het ook ideaal, niet te laag en niet te hoog.
Picture not included in this copy HomeboyYellow - Belgium · Jan 4, 2009#93Looks nice!
And welcome on the Benelux forum, BurningBjorn!
But, do not forget that we have also French speaking members (from Belgium) here, so please try to keep the conversations in English. 😉
BurningbjornBerkel en rodenrijs, the Netherlands · Jan 5, 2009#94 Originally Posted by
andries ↑ De Toyota prijs is inclusief montage
Nog steeds een groot prijsverschil!
Still a huge price difference Originally Posted by
Jochen ↑ Ik heb H&R veren, die zijn ook niet zo duur, en verlagen ongeveer 3,5 cm. Zo vind ik het ook ideaal, niet te laag en niet te hoog.
Geen last van aanlopen bij drempels of iets? of als er 4 personen in zitten?
Wat voor maat velgen heb je onder je yaris zitten?
Any rubbing on speedbumps or with 4 people in the car?
What size rims do you have? Nico4960Belgium · Jan 5, 2009#95 Originally Posted by
Homeboy ↑ Looks nice!
And welcome on the Benelux forum, BurningBjorn!
But, do not forget that we have also French speaking members (from Belgium) here, so please try to keep the conversations in English. 😉
THX 👏
JochenGullegem - Belgium · Jan 5, 2009#96 Originally Posted by
Burningbjorn ↑ Geen last van aanlopen bij drempels of iets? of als er 4 personen in zitten?
Wat voor maat velgen heb je onder je yaris zitten?
Any rubbing on speedbumps or with 4 people in the car?
What size rims do you have?
Only with deep gutters, sometimes I scrape a bit with that plastic frontlip. But I think that can happen even if it's not lowered.
Most people I had in my car was 3 (including me) and I didn't have any problems. Although I take speedbumps a bit slower then (after all, that's what they're for :))
My rims are 16"
andriesThread starterSpain · Jan 5, 2009#97@Jochem; what's the offset (ET) of your rims?
JochenGullegem - Belgium · Jan 5, 2009#98 Originally Posted by
andries ↑ @Jochem; what's the offset (ET) of your rims?
38
(width is 7" if anyone needs to know)
andriesThread starterSpain · Jan 5, 2009#99 Originally Posted by
Jochen ↑ 38
(width is 7" if anyone needs to know)
Dat verklaart dus dat het af en toe aanloopt. Als je ET 45 of hoger hebt zal het niet gebeuren.
(thats explains that the wheels rubbing sometimes. This ET is very low)
BurningbjornBerkel en rodenrijs, the Netherlands · Jan 5, 2009#100 Originally Posted by
andries ↑ Dat verklaart dus dat het af en toe aanloopt. Als je ET 45 of hoger hebt zal het niet gebeuren.
(thats explains that the wheels rubbing sometimes. This ET is very low)
Mijn velgen zijn ET 35, denk dus dat 2,5cm verlagen de max is.
my rims are ET 35, i think lowering 2,5cm is max BTW wel een naai streek van toyota, heb net mijn yaris binnen, heeft het 2009 model 100PK. Zullen ze ook niet ff zeggen, dan had ik nog even gewacht!
100 PK uit een 1.3!!!😳