Yarisworld Archive

Need help on vibration.

5 posts · 4,767 views

Red HorseOriginal postCosta mesa, California · Oct 31, 2008#1
I just change my oil & fillter today, I used 3 qt. and 1 cup of royal purple syntetic 5w-30 and a mobil 1 103 filter. I followed the DIY correctly,but whenever i drive around then stop,feel a vibration for 1 or 2 second only and it was'nt there before i change oil. Should i put more oil? or its too much? cause im having a hard time to see the measurement of the light purple oil on the dip stick.

Replies 4

b_hickman11Tyler, TX · Oct 31, 2008#2
You might want to go back underneath and make sure your filter is on tight and your plug. Also I would go ahead and add the rest of that 4th qt. of oil.
gidNortheast · Oct 31, 2008#3
Originally Posted by b_hickman11 ↑
You might want to go back underneath and make sure your filter is on tight and your plug. Also I would go ahead and add the rest of that 4th qt. of oil.
the car will be at the FULL mark with only 3 and 1/2 quarts . Just did oil change yesterday and is at FULL . This has been the case since we've ownd both YARIS and a '07 PRIUS .
touroxinCalifornia · Oct 31, 2008#4
I can second that. It took 3 and a half quarts when I did my oil change last weekend.
Red HorseThread starterCosta mesa, California · Nov 1, 2008#5
thanks for the help. I just added half on the 4th and now it runs fine.