Yarisworld Archive

FS: Sedan Nitto Mid-Pipe w/ CEL Fix

38 posts · 11,199 views

SplitOriginal postEdmonton · Oct 31, 2008#1
PRICES:
CEL Eliminator O2 Sensor Elbow Bend: $35 shipped
Nitto Mid-Pipe Custom Extended for Yaris Sedan (2007-2009): $215 + shipping
Mid-Pipe and CEL Eliminator together: $245 + shipping


This pipe has been modified by a muffler shop to be a few inches longer so it fits the sedan instead of the hatchback. Otherwise its the exact same as the nitto midpipe that cali yaris sells. I don't have any pictures of it yet, but I'll take them as soon as this comes off the car. It was used for 1 summer, approximately 5000kms on it.
READY TO SHIP

pictures

Picture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copy

Replies 37

cali yarisCanoga Park, CA · Nov 1, 2008#2
ooh, a mid pipe for the SEDAN -- someone jump on this!
at3GGVA Beach · Nov 2, 2008#3
How much did it cost you to have the muffler shop lengthen it for you?
sw20monsterstockton, ca · Nov 3, 2008#4
what's a cel fixer? why would you need it?

-pete
SplitThread starterEdmonton · Nov 3, 2008#5
nitto mid-pipe replaces factory catalyst which causes a check engine light, so the CEL eliminator is required.

i paid like $90ish to have the pipe lengthened, but labour costs way too much here in Alberta, i bet other muffler shops outside this damn province would do it for around $50.
PHXDEMONPhoenix, AZ · Nov 3, 2008#6
I would be interested if it was for the LB. good luck with the sale.
MUSKOKA800Chatham, Ontario, Canada · Nov 3, 2008#7
Will the sedan pass a government smog test with that pipe swapped in? Something tells me NO.
at3GGVA Beach · Nov 3, 2008#8
How much??
drbilalNYC | Pakistan · Nov 3, 2008#9
post up some pics pls.
SplitThread starterEdmonton · Nov 4, 2008#10
well this mid-pipe was $250 + $90 to modify it + $40 for the CEL fixer. A total of $380. Granted, labour is over priced in Alberta so it should have only cost like $60 at most to modify the pipe if you had it done anywhere in the states. so that puts its value at $350. I'm going to start with an asking price of $300obo with the CEL fixer. i'll entertain all reasonable offers and i'll take the best one i get before the end of the month.
AothachosLong Island, NY · Nov 4, 2008#11
ah so you can have the mid-pipe lengthing i was asking that awhile ago, now i know what to do, or just possibly buy this from you sometime MAYBE at the end of the month just MAYBE lol

will you be able to ship it to new york state?
SplitThread starterEdmonton · Nov 4, 2008#12
yep. i can ship no problem. buying mine should save you a little money since it comes with that CEL fixer too. you can't just use a defouler, you have to get this silly metal elbow custom made. They're more expensive and mine took like 2 months to arrive.
SplitThread starterEdmonton · Nov 6, 2008#13
nitto sedan mid-pipe with CEL fixer ready to ship $295+shipping!
SplitThread starterEdmonton · Nov 12, 2008#15
Now willing to part out the CEL eliminator, or sell the system without it!
bxrichN.Y. · Nov 12, 2008#16
🤤dam no $$$$ s*#T.🤤
SplitThread starterEdmonton · Nov 17, 2008#17
damn recession and everyone saving their money and not spending it! its just compounding the problem!
at3GGVA Beach · Nov 17, 2008#18
bump ....nothing else for the sedan so far guys its a pretty good deal
at3GGVA Beach · Nov 18, 2008#19
why are you selling it anyway?
SplitThread starterEdmonton · Nov 18, 2008#20
didn't want to run catless.
SplitThread starterEdmonton · Nov 21, 2008#21
bump for price drop!
SplitThread starterEdmonton · Dec 2, 2008#22
bump for another price drop.. i'm moving soon and I want this stuff out of my garage!
SplitThread starterEdmonton · Dec 5, 2008#23
bump for price reduction.
i might even be selling the yaris soon so there could be a massive part-out coming soon.
at3GGVA Beach · Dec 5, 2008#24
how much you down to?
SplitThread starterEdmonton · Dec 5, 2008#25
well if you read the first post.. i keep editted the price to its new price:

CEL Eliminator O2 Sensor Elbow Bend: $35 shipped
Nitto Mid-Pipe Custom Extended for Yaris Sedan (2007-2009): $230 + shipping
Mid-Pipe and CEL Eliminator together: $260 + shipping
thebarberGrand Rapids, MI · Dec 6, 2008#26
CAD or USD?
SplitThread starterEdmonton · Dec 6, 2008#27
USD. its for a sedan btw.
at3GGVA Beach · Dec 6, 2008#28
geez my bad
SplitThread starterEdmonton · Dec 9, 2008#29
bump for another price drop. if this goes any lower i'll probably just buy a high-flow cat, weld it in, and put it back on my car.

new price:
CEL Eliminator O2 Sensor Elbow Bend: $35 shipped
Nitto Mid-Pipe Custom Extended for Yaris Sedan (2007-2009): $225 + shipping
Mid-Pipe and CEL Eliminator together: $255 + shipping
at3GGVA Beach · Dec 10, 2008#30
i cant believe no sedan owner wants this
msfire671671 · Dec 10, 2008#31
haha...i would love this seeing that its for a sedan...but damn....cash flow isnt that great.😢
msfire671671 · Dec 10, 2008#32
btw that is a great deal.
msfire671671 · Dec 11, 2008#33
too bad for me...cash flow....is no flow!
SplitThread starterEdmonton · Dec 14, 2008#34
well.. i need to get this out of my garage. i might be moving soon and i want less stuff to move. i've dropped the price a bit more yet. this is already so cheap, what is wrong with you people? i'm gunna put it on ebay i guess =/
Kaotic LazagnaCentral Valley, CA · Dec 14, 2008#35
Bump for a fellow sedan owner.

Btw, aren't the cats replaced with high flow cats? So you aren't technically running catless, right?

And just like you said, recession + starving college student = no extra money for mods atm.
thebarberGrand Rapids, MI · Dec 14, 2008#36
Originally Posted by Kaotic Lazagna ↑
Btw, aren't the cats replaced with high flow cats? So you aren't technically running catless, right?
3 resonators....no cats (but in theory you could get one or 2 put on...
Kaotic LazagnaCentral Valley, CA · Dec 14, 2008#37
Originally Posted by thebarber ↑
3 resonators....no cats (but in theory you could get one or 2 put on...
OH, I thought I read somewhere that it was 2 high flow cats and one resonator. LOL.

Thanks for the clarification.
SplitThread starterEdmonton · Dec 18, 2008#38
the 3 resonators make it as deep as possible for a 1.5L!
it sounds less ricey than just my axle back.
i dropped the price yet again.
why cant you americans just borrow more money and buy this from me?