Yarisworld Archive

Scangauge location within car

15 posts · 5,197 views

lita_gOriginal postDeland, FL · Oct 30, 2008#1
I'm considering getting a scangauge or a similar device for my yaris as soon as I can afford it, but I was wondering where did you all install yours? I just saw a post of someone that installed it inside the glove box behind the wheel, that seems like a good idea, but it would be nice if others could voice their opinions and say where they installed theirs (and why). Of course pics are always good 😁.

Replies 14

Klink10910 · Oct 30, 2008#2
Do a search to find, there are several.
lita_gThread starterDeland, FL · Oct 30, 2008#3
Originally Posted by Klink10 ↑
Do a search to find, there are several.
I did search, I just thought it would be nice to have a compilation within 1 thread that would show different possible locations for the device.
Bob_VTVermont · Oct 30, 2008#4
Ran the cable inside the dash...... up the pillar....... tucked into the headliner over to the mirror. Cheap, easy and out of view in that part of the windshield.

1 attachment not included in this copy

TinyGiantRochester, NH · Oct 30, 2008#5
Originally Posted by Bob_VT ↑
Ran the cable inside the dash...... up the pillar....... tucked into the headliner over to the mirror. Cheap, easy and out of view in that part of the windshield.
they make a mounting bracket to mount the SG there


i was going to do the under the HU placement but have an indash double din dvd player on the way... so its probably going to get installed on the drivers side glove box
Bob_VTVermont · Oct 30, 2008#6
The bracket cost $$$ this is free. The velcro is attached to the top of the rearview mirror.
ozmddDFW, TX · Oct 30, 2008#7
How is the illumination on the SG (brightness-wise) when mounted above the mirror? Is it easy to read during daylight? How about distractingly-bright relative to the mirror at night?
Mikeb YarisIllinois · Oct 30, 2008#8
How about mounting in front of the gauge cluster, just above the stereo. Seems like it would be far enough in front of the cluster to not block the view of the gauges and be in a place we frequently look.

Anyone done this?
Klink10910 · Oct 30, 2008#9
There ya go, several great examples....me thinks Echo has a great set up.
Bob_VTVermont · Oct 30, 2008#10
Originally Posted by ozmdd ↑
How is the illumination on the SG (brightness-wise) when mounted above the mirror? Is it easy to read during daylight? How about distractingly-bright relative to the mirror at night?
You can "custom color" the light and I have mine on the brightest standard green setting and I can see it w/o being distracting at all.

Works fine in daylight too.
bobselectricwest harrison, ny · Oct 30, 2008#11
I did mine the same way as Bob VT, and have no problem with it there
Franck_QcQuébec City, Canada · Oct 30, 2008#12
simply on the steering column

Picture not included in this copy
41magmag41New hampshire · Oct 30, 2008#13
I did something similiar to the previous post but velcrowed it on the dash just behind the steering wheel. Wiring is hidden and I can see it just fine, I can also remove it from the car easily if I want to.
ddongbaphay · Oct 30, 2008#14
Originally Posted by echo_hrs ↑
Picture not included in this copy
Picture not included in this copy

Cheers
Whoa, thats hot.
Bob_VTVermont · Oct 30, 2008#15
Originally Posted by Franck_Qc ↑
simply on the steering column

Picture not included in this copy
Echo Hrs is a nice setup but if you leave the stock radio in it will not work.

If you mount it on the steering column then you are needing to take your eyes to a whole new spot. The one in the photo has 4 places for your eyes..... nav, steering column, gauges, center rear view mirror.

With mine mounted on top of the mirror at is natural to glace and see it while checking the mirror.

It's all a matter of personal choice. You can purchase an additional cable-plug from scangauge to ease transfers to another car.