Yarisworld Archive

LEDs to replace interior lights: Which ones?

58 posts · 44,988 views · page 1 of 2

IsLNdbOiOriginal postLas Vegas, NV · Oct 29, 2008#1
Ok, so I'd like to replace these lights with white LEDs:

- The ones up front above the rear view mirror (you push them to turn them on).
-

- The ones in the center of the roof that you can set off, on or on w/ the door.
-

- Thinking about replacing the LEDs in the three console knobs as well (AC recycle air / fresh air, AC temp., AC strength), but not sure how it would look with the all amber lighting Toyota has put in these '09 LBs.
-

- The light in the trunk / hatch area (driver side I think).
-

- The parking lights in the headlight housing.
-

- The rear license plate light.
-


I'd like to order from HiLEDs again: http://www.hileds.com/products.php

Which bulbs and sizes do I need from them to replace all of the above lights I've listed?

Are there better (quality / price wise) LEDs / companies than HiLEDs?


Also, my dealer drilled license plate holes into my front bumper even though I told them not to. They've offered to fill the holes and repaint the bumper, but lately I've been toying with the idea of putting white LEDs into those license plate holes and tying them into the parking lights.

To make it easy for everyone who might find this post useful, just quote this post and add the link to the specific bulb and list bulb's size and quantity needed next to each "-" under the corresponding light I've listed above. Thanks everyone!

Replies 57

battleversiontc808 · Oct 29, 2008#2
try optauto.com they sell some for the front in a set and try oznium.com they sell some for the center try superbrightleds.com for the rest
Meteorite_MartyWaterloo, Ontario, Canada · Oct 29, 2008#3
I replaced all those lights you mentioned with white LEDs. The white color I use is a 6500K, which is a cool, bright white, with a very slight hint of purple. Also called Super White or Hyper White. No trace of blue.

To do the console control knobs I ordered 3x Super White Neo Wedge Based LED Bulbs (30% brighter) from www.autolumination.com Make sure you get Type B.

http://autolumination.com/74.htm

Picture not included in this copy

For my gear shifter I ordered 1x Tri-Power 3 LED Bulb from www.autolumination.com

http://autolumination.com/74.htm

Picture not included in this copy

For the map lights (next to the rear view mirror), I used a 194 replacement bulb from www.vleds.com. I ordered 2x V-LEDS HID WHITE 11 SMT LIGHT BULBS. These will also work for the parking lights and license plate (which I will order later, because I wanted to test the fit and color before I ordered more).

http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481

Picture not included in this copy

I replaced the 31mm festoon bulb for the cabin light (middle of roof with the switch for ON/OFF/DOOR) with a V-LEDS HID WHITE 48 M-SMT PCB light board.

http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481

Picture not included in this copy

For the trunk light, I replaced the 36mm festoon bulb with a V-LEDS HID WHITE 30 M-SMT BULBS light board.

http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481

Picture not included in this copy

I cannot begin to tell you how great the bulbs are from VLEDS!!! The customer service is good. The quality of their bulbs is amazing, price is affordable, and output is so bright. Most importantly, each of the VLED bulbs are the exact same color, so your interior will match perfectly. The accessories for the VLED blulbs (the wiring and festoon blanks) are all interchangeable.

I will take pictures of my interior lighting modifications.
1NZYaris1New Zealand · Oct 29, 2008#4
Front Map lights are T10 bulb
as for the middle roof centre it is 32mm feston i am useing a adaptor and 48led panel in this when it arrives next week , the rear from memory is a 42mm feston ,
DOOOH to slow as above.
Meteorite_MartyWaterloo, Ontario, Canada · Oct 29, 2008#5
I also soldered LEDs into the driver side door window switch, and the center door lock switch near the parking brake. I forgot which LED bulbs I used for those (I can check into that if you are interested).

No more GREEN for me!!!
Meteorite_MartyWaterloo, Ontario, Canada · Oct 29, 2008#6
Rear is a 36mm festoon. I crammed a 42mm festoon in there, and it holds my 30LED light board in there perfectly.
battleversiontc808 · Oct 29, 2008#7
[QUOTE=IsLNdbOi;159547]Thanks. Not specific enough though. I'd like those who know for sure to list them in the format I posted above. Replace the "xxx" with the link to the specific LED or list the model number and size.

- The ones up front above the rear view mirror (you push them to turn them on).
http://www.optionsauto.com/prodinfo....r=LUX-FS-T013W


- The ones in the center of the roof that you can set off, on or on w/ the door.
- http://www.oznium.com/rigid-5mm-led-dome

-
Thinking about replacing the LEDs in the three console knobs as well (AC recycle air / fresh air, AC temp., AC strength), but not sure how it would look with the all amber lighting Toyota has put in these '09 LBs.
http://superbrightleds.com/instrument.html

- The light in the trunk / hatch area (driver side I think).
-http://superbrightleds.com/instrument.html

- The parking lights in the headlight housing.
- http://superbrightleds.com/mini-wedge.html

- The rear license plate light.
- http://superbrightleds.com/mini-wedge.html
IsLNdbOiThread starterLas Vegas, NV · Oct 29, 2008#8
Originally Posted by Meteorite_Marty ↑
Rear is a 36mm festoon. I crammed a 42mm festoon in there, and it holds my 30LED light board in there perfectly.

This is a 42mm festoon LED bulb, right?
http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481
sportin83central IL · Oct 29, 2008#9
i used a 31mm bulb for the front lights and 39mm for the hatch light . they r a little longer than the factory bulb but worked fine. and all the domelights are a standard 194 sizei bought all mine off ebay.http://stores.ebay.com/warden-jp2002
Meteorite_MartyWaterloo, Ontario, Canada · Oct 29, 2008#10
Originally Posted by IsLNdbOi ↑
This is a 42mm festoon LED bulb, right?
http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481
No, that festoon-dummy is a 31mm. If you went with the 48 LED for your cabin too, that kit comes with a 31mm and a 42mm, which you could then mix and match interchangeably.
TheRealEnthMiami, FL · Oct 29, 2008#11
PICS PICS PICS to see how it looks
ROCKLAND TOYOTAROCKLAND COUNTY NY · Oct 29, 2008#12
Originally Posted by IsLNdbOi ↑
Thanks. Not specific enough though. I'd like those who know for sure to list them in the format I posted above. Replace the "xxx" with the link to the specific LED or list the model number and size.

- The ones up front above the rear view mirror (you push them to turn them on).
- xxx

- The ones in the center of the roof that you can set off, on or on w/ the door.
- xxx

- Thinking about replacing the LEDs in the three console knobs as well (AC recycle air / fresh air, AC temp., AC strength), but not sure how it would look with the all amber lighting Toyota has put in these '09 LBs.
- xxx

- The light in the trunk / hatch area (driver side I think).
- xxx

- The parking lights in the headlight housing.
- xxx

- The rear license plate light.
- xxx
do you want someone to come there and do the install as well......
sportin83central IL · Oct 30, 2008#13
Originally Posted by ROCKLAND TOYOTA ↑
do you want someone to come there and do the install as well......
thats funny 😆
1NZYaris1New Zealand · Oct 30, 2008#14
Originally Posted by ROCKLAND TOYOTA ↑
do you want someone to come there and do the install as well......
Are you volentering😆will you pay for the LED's as well😆😆
IsLNdbOiThread starterLas Vegas, NV · Oct 30, 2008#15
Marty, just to make sure everything is correct I'd get these for the map lights (the ones next to the rear view mirror that you push to turn on or off), the parking lights that are in the headlight housing, and the license plate light for total 5 bulbs (3 sets):
http://www.v-leds.com/Shop/Control/P.../vpid/4835704/

Then I get one of these for the cabin light (the one with the switch for on / off / door):
http://www.v-leds.com/Shop/Control/P.../vpid/5217649/

Finally, one of these for the trunk / interior hatch area:
http://www.v-leds.com/Shop/Control/P.../vpid/5168718/

OR these
http://www.v-leds.com/Shop/Control/P.../vpid/5217649/


Did I get all of that right?


Originally Posted by ROCKLAND TOYOTA ↑
do you want someone to come there and do the install as well......
Sure. I'll wait for you to come over so you can install them for me. 😉

By the way, were you able to find out if there is a new part number / new version of the TYC tail lights for the 5-door LBs? Also, will the mudguards for the '07 / '08 LBs fit the 5-door LBs?

You do work at a Toyota dealer right?
FunctionSpec626, Southern California · Oct 30, 2008#16
Originally Posted by Meteorite_Marty ↑
I replaced all those lights you mentioned with white LEDs. The white color I use is a 6500K, which is a cool, bright white, with a very slight hint of purple. Also called Super White or Hyper White. No trace of blue.

To do the console control knobs I ordered 3x Super White Neo Wedge Based LED Bulbs (30% brighter) from www.autolumination.com Make sure you get Type B.

http://autolumination.com/74.htm

Picture not included in this copy

For my gear shifter I ordered 1x Tri-Power 3 LED Bulb from www.autolumination.com

http://autolumination.com/74.htm

Picture not included in this copy

For the map lights (next to the rear view mirror), I used a 194 replacement bulb from www.vleds.com. I ordered 2x V-LEDS HID WHITE 11 SMT LIGHT BULBS. These will also work for the parking lights and license plate (which I will order later, because I wanted to test the fit and color before I ordered more).

http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481

Picture not included in this copy

I replaced the 31mm festoon bulb for the cabin light (middle of roof with the switch for ON/OFF/DOOR) with a V-LEDS HID WHITE 48 M-SMT PCB light board.

http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481

Picture not included in this copy

For the trunk light, I replaced the 36mm festoon bulb with a V-LEDS HID WHITE 30 M-SMT BULBS light board.

http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481

Picture not included in this copy

I cannot begin to tell you how great the bulbs are from VLEDS!!! The customer service is good. The quality of their bulbs is amazing, price is affordable, and output is so bright. Most importantly, each of the VLED bulbs are the exact same color, so your interior will match perfectly. The accessories for the VLED blulbs (the wiring and festoon blanks) are all interchangeable.

I will take pictures of my interior lighting modifications.
WOW you were able to get a 48 M-SMT LED board in the dome light area?? Man I should of went with that instead. Thought it was going to be too big so went with a 30 M-SMT instead. But I guess I can put that in my hatch area and get a 48 M-SMT for the dome 🙂

Can't image how bright the 48 M-SMT is because the 30 M-SMT is already super BRIGHT!

I can vouch for VLEDs as well. I also have the 11 SMT 194 bulb for the parking, map and license plate lights and they are really bright. Excellent quality and affordable price.
JUST DON'T GET THEIR CHEAPER LED LIGHTS, THEY SUCK. Had to replace all my cheaper LEDs because the light output on them was pretty dim. Pay the money to get the SMT bulbs. They are worth every penny!
IsLNdbOiThread starterLas Vegas, NV · Oct 30, 2008#17
Thanks for all the input guys. I've ordered the 48-LED light for both the cabin light and the interior trunk / hatch light. I'm going to see if I can shove one of these 48-LED boards into that hatch light area.

Still looking for bright, white LEDs that will fit into standard license plate holes in the front bumper. I need to find some that are water-proof.
custom LftbackHouston, TX · Oct 30, 2008#18
Originally Posted by IsLNdbOi ↑
Thanks for all the input guys. I've ordered the 48-LED light for both the cabin light and the interior trunk / hatch light. I'm going to see if I can shove one of these 48-LED boards into that hatch light area.

Still looking for bright, white LEDs that will fit into standard license plate holes in the front bumper. I need to find some that are water-proof.
Sweet deal! 👍
1NZYaris1New Zealand · Oct 30, 2008#19
Originally Posted by IsLNdbOi ↑
Thanks for all the input guys. I've ordered the 48-LED light for both the cabin light and the interior trunk / hatch light. I'm going to see if I can shove one of these 48-LED boards into that hatch light area.

Still looking for bright, white LEDs that will fit into standard license plate holes in the front bumper. I need to find some that are water-proof.
All you need is 2 x T10 with the LED's of your choice as the number plate light
is weather proof .
I am already running 2 T10's with 4 Flux LED's on each. works and looks great,👍
IsLNdbOiThread starterLas Vegas, NV · Oct 30, 2008#20
Originally Posted by 1NZYaris1 ↑
All you need is 2 x T10 with the LED's of your choice as the number plate light

is weather proof .

I am already running 2 T10's with 4 Flux LED's on each. works and looks great,
I'm not talking about the light for the rear plate in that post. My dealer drlled holes for the front plates even though I told them not to. Now I have two holes on my front bumper. The holes are thr standard size for license plate screws here in the US. I want to put a white LED in each hole and wire them to the paking lights.
1NZYaris1New Zealand · Oct 31, 2008#21
there are some t10 water proof ones around , i will take a photo for you if you like. have about 4 prs sitting in the workshop
IsLNdbOiThread starterLas Vegas, NV · Oct 31, 2008#22
So T10 sized LEDs are the same size as standard license plate mounting holes in the US?
battleversiontc808 · Oct 31, 2008#23
arent the holes like a 1/4 inch or so
battleversiontc808 · Oct 31, 2008#24
maybe a 5mm led try measure the holes and go measure a 5mm led to see or a 10mm led at like radio shack if its one of those oznium.com sells them pre wired
IsLNdbOiThread starterLas Vegas, NV · Oct 31, 2008#25
Been googling screw sizes for license plates and it looks like American cars use 1/4" screws and I've been seeing 6mm and 6.3mm for Japanese (Toyota, Nissan, etc.) cars.
Meteorite_MartyWaterloo, Ontario, Canada · Nov 1, 2008#26
Guys, the 48 LED board will NOT fit into the trunk area!!! Check my orignal post.

There is only 2cm x 4.5 cm worth of space. I cut a cardboard template of each light board before I ordered, based on the specs supplied form VLEDS. The 30 LED board is rectangular and will fit the trunk light housing. The 48LED is square and impossible to fit. The 48 LED board fits perfectly into the cabin light area, which has excess space to spare with a 7.5cm x 4.5 cm housing (approximately).
Meteorite_MartyWaterloo, Ontario, Canada · Nov 1, 2008#27
Some late night photography! Sorry for my crappy night pics... no tripod. Picures can only show so much. These lights really brighten up the cabin. I can actually see the floor and back seat area, with no shadows or ugly yellow. The white color is consistent with amongst all VLED lights, for all cabin, map, and trunk lighting.

Interior map (2 x 11 LED 194 bulbs) and cabin (1 x 48 LED board)...

6 attachments not included in this copy

Meteorite_MartyWaterloo, Ontario, Canada · Nov 1, 2008#28
More pics of the trunk using the 30 LED board. No more ugly, dim, warm white/yellow incandescent bulbs!!!

3 attachments not included in this copy

k3nn4Australia Perth · Nov 2, 2008#29
Nice effect! I placed my order at v-leds :) thanks for the picture
DerKaiZeRsPerth WA · Nov 3, 2008#30
Originally Posted by Meteorite_Marty ↑
Guys, the 48 LED board will NOT fit into the trunk area!!! Check my orignal post.

There is only 2cm x 4.5 cm worth of space. I cut a cardboard template of each light board before I ordered, based on the specs supplied form VLEDS. The 30 LED board is rectangular and will fit the trunk light housing. The 48LED is square and impossible to fit. The 48 LED board fits perfectly into the cabin light area, which has excess space to spare with a 7.5cm x 4.5 cm housing (approximately).
Hi meteorite.. so 48 LED board will FIT into the DOME light right?
coz I just bought LED from ebay and it doesn't fit into the DOME light because it is too Thick.... 🆘

and what do u mean by 2 x 11 LED 194 bulbs that you put into the interior map.
Can you show me the type of that LED?? 🆘
k3nn4Australia Perth · Nov 3, 2008#31
Originally Posted by DerKaiZeRs ↑
Hi meteorite.. so 48 LED board will FIT into the DOME light right?
coz I just bought LED from ebay and it doesn't fit into the DOME light because it is too Thick.... 🆘

and what do u mean by 2 x 11 LED 194 bulbs that you put into the interior map.
Can you show me the type of that LED?? 🆘
"I hope you do read this post carefully.."

http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481

This is the one!
DerKaiZeRsPerth WA · Nov 4, 2008#32
Hi, Will I get a discount price if I fill in the Coupon Code when I try to buy several LED's from this site??
k3nn4Australia Perth · Nov 4, 2008#33
Originally Posted by DerKaiZeRs ↑
Hi, Will I get a discount price if I fill in the Coupon Code when I try to buy several LED's from this site??
I think you should try the coupon code yourself.. 🙄
Meteorite_MartyWaterloo, Ontario, Canada · Nov 5, 2008#34
I think NISSANCLUB works for the coupon code. It is for $5 off.
Meteorite_MartyWaterloo, Ontario, Canada · Nov 5, 2008#35
Originally Posted by DerKaiZeRs ↑
Hi meteorite.. so 48 LED board will FIT into the DOME light right?
coz I just bought LED from ebay and it doesn't fit into the DOME light because it is too Thick.... 🆘

and what do u mean by 2 x 11 LED 194 bulbs that you put into the interior map.
Can you show me the type of that LED?? 🆘
Yes, the 48 LED board fits into the DOME light (that is the one that goes off and on with the door opening). Naturally the board doesn't fit into the bracket where the festoon was. You have to run the dummy-festoon and wiring to the power clips, then mount the LED board somewhere in the plastic housing of the dome light.
IsLNdbOiThread starterLas Vegas, NV · Nov 5, 2008#36
All the coupons I've found (including the above NISSANCLUB one) are 10% off.
k3nn4Australia Perth · Nov 10, 2008#37
Originally Posted by Meteorite_Marty ↑
Yes, the 48 LED board fits into the DOME light (that is the one that goes off and on with the door opening). Naturally the board doesn't fit into the bracket where the festoon was. You have to run the dummy-festoon and wiring to the power clips, then mount the LED board somewhere in the plastic housing of the dome light.
I've received my LEDs from V-LEDs just then and installed! I've to say "This is Awesome! Extremely Bright and just fit except for Number Plate (11 LED 194 bulbs) :( A little bit long but still managed to install into it.
DerKaiZeRsPerth WA · Nov 10, 2008#38
Originally Posted by k3nn4 ↑
I've received my LEDs from V-LEDs just then and installed! I've to say "This is Awesome! Extremely Bright and just fit except for Number Plate (11 LED 194 bulbs) :( A little bit long but still managed to install into it.
wew. how much it cost for everything...(incl. shipping to Perth) 😲
k3nn4Australia Perth · Nov 10, 2008#39
Originally Posted by DerKaiZeRs ↑
wew. how much it cost for everything...(incl. shipping to Perth) 😲
Well... I paid around AUD$140 included Express shipping.. Take 5 days to reach my house door.
Meteorite_MartyWaterloo, Ontario, Canada · Nov 10, 2008#40
Glad everyone is pleased so far. I think they look amazing!
DerKaiZeRsPerth WA · Nov 11, 2008#41
Originally Posted by k3nn4 ↑
Well... I paid around AUD$140 included Express shipping.. Take 5 days to reach my house door.
damn expensiveeeeeeeeeeeeee......... 😢😢😢

shipping cost, it gives me a heart attack 😳😳
Meteorite_MartyWaterloo, Ontario, Canada · Nov 12, 2008#42
If you take the discount into effect, my shipping to Canada was like $10. It took about a week. Why rush delivery when you live so far away, like in Australia? 🤷
Meteorite_MartyWaterloo, Ontario, Canada · Nov 12, 2008#43
Originally Posted by PK198105 ↑
the only think thats a turn off about the Vleds is the shipping, guys/gals try Ileds same products or almost and the shipping is more reasonable

That's like saying almost pregnant. :)

Vleds are awesome, and the shipping is quite fair, especially when you use the discount coupon.
njitebMassachusetts · Mar 29, 2009#44
sorry to bring up an old topic, but i can't seem to get the cover off of my hatch light or the map lights..only got the dome one done for now.. anyone can help?
Meteorite_MartyWaterloo, Ontario, Canada · Mar 30, 2009#45
Originally Posted by njiteb ↑
sorry to bring up an old topic, but i can't seem to get the cover off of my hatch light or the map lights..only got the dome one done for now.. anyone can help?
For both, you will need a very small flat head screw driver.

The map light covers can be removed by placing the screw driver in the center gap, in between the pair. Then press towards the outside, away from the centre. Each of the covers are on 2 small pop-off hinges, located at each corner nearest the center. It might help if you move the screw driver towards one of the hinges, while keeping it in the center gap, then apply the pressure towards the outside, as mentioned.

The trunk light is held on by a plastic clip, under the grey plastic of the interior. Itcan be popped off by inserting the screw driver on the front edge of the light housing and lifting upward and out.
njitebMassachusetts · Mar 30, 2009#46
thanks! i'm also wondering if the screwdriver will scratch the grey plastic if i apply too much pressure. i actually tried to do that to my trunk light with the screwdriver i use for my computer screws, but was afraid i might break the clips or scratch the interior.
IsLNdbOiThread starterLas Vegas, NV · Mar 30, 2009#47
Try using a credit card to pry it out.
Meteorite_MartyWaterloo, Ontario, Canada · Mar 30, 2009#48
Originally Posted by njiteb ↑
thanks! i'm also wondering if the screwdriver will scratch the grey plastic if i apply too much pressure. i actually tried to do that to my trunk light with the screwdriver i use for my computer screws, but was afraid i might break the clips or scratch the interior.
If you're careful, it shouldn't scratch. Good idea about the credit card, but I am not sure how much leverage you can get from that. Plus, I am not sure the credit card is a Genuine Toyota Approved technique (inside joke!).
Meteorite_MartyWaterloo, Ontario, Canada · Mar 30, 2009#50
So far, mine have all been fine from VLEDS.COM. Even if they go, I am willing to buy more because the brighter light and color quality is worth it, versus stock.