Yarisworld Archive

Tanabe exhaust???

29 posts · 9,756 views

jaserhunterOriginal postNC · Oct 28, 2008#1
My tanabe exhaust should be here before friday. Will i feel a differance when i put it on? How hard is it to put it on myself? thanks

Replies 28

kounj · Oct 28, 2008#2
it is easy to replace 2 14mm bolts then switch them.
jaserhunterThread starterNC · Oct 28, 2008#3
hell yeah. will i tell a differance?
PaidTimeOffHawaii · Oct 29, 2008#4
probably only in sound and possibly marginally better pull in the high end. Nothing epic. It's only an axle-back after all.
marcustoronto, canada · Oct 29, 2008#5
buy axleback for sound not for hp gain....
PHXDEMONPhoenix, AZ · Oct 29, 2008#6
It will sound better, but you will only notice a slight performance gain if you have a good intake as well.
mastaofdisastaamerika · Oct 29, 2008#7
its a great part, sounds great decent price, and its from japan what more do u want
YariceVictorville, CA · Oct 29, 2008#8
Do u lose any MPG from the exhaust?
Benggolf2Richmond, B.C., Canada · Oct 29, 2008#9
Probably not, but definitely lose some low end torque IMHO.
Nice sounds though. Well, you win some and lose some. 🤷

Picture not included in this copy
jaserhunterThread starterNC · Oct 30, 2008#10
i have a k&n intake i could tell a little differance with that. i hope with is on there too, it will have a :redfacelittle more pick up. it is only a 1.5 liter.😳
bikegermNashville, TN. · Oct 30, 2008#11
Mine arrived today !! I'll be putting it on first thing saturday morning. I'm excited !! Thanks to MicroImage !!
ZINGLebanon, Middle East. · Oct 31, 2008#12
Don't forget pictures :)


I am getting a Tanabe exhaust, hopefully, and I would love to see pics of them on the Yaris.
bikegermNashville, TN. · Nov 1, 2008#13
Just installed my Tanabe Medalion Touring exhaust. It took me a total of 30 minutes to jack up my car, remove the factory exhaust, unbox the Tanabe, install the Tanabe, remove the jacks, and take pictures. Piece of cake install. It sounds awesome !! It's not much louder than the factory exhaust with a tip that I had been running. Just has a deeper tone. Here are pics of the new exhaust.

3 attachments not included in this copy

ZINGLebanon, Middle East. · Nov 1, 2008#14
It looks vulnerable. Any pothole or bump would scratch it, wouldn't it? :s
YariceVictorville, CA · Nov 1, 2008#15
Whats up with the way its mounted, it does look vulnerable especially at a steep drive way or something, tanabe shoud of mounted the other way like other exhaust.
largeorangefontSo Cal, OC · Nov 1, 2008#16
Originally Posted by Yarice ↑
Whats up with the way its mounted, it does look vulnerable especially at a step drive way or something, tanabe shoud of mounted the other way like other exhaust.
The canister style mufflers (and many aftermarket axlebacks like Megan) hang a lot lower than the Tanabe.
ZINGLebanon, Middle East. · Nov 1, 2008#17
I was getting a tanabe exhaust but the there is noway it will last with the shitty roads here...you can't mount that muffler horizontally?


EDIT: How much did it cost you?
largeorangefontSo Cal, OC · Nov 1, 2008#18
Originally Posted by ZING ↑
I was getting a tanabe exhaust but the there is noway it will last with the shitty roads here...you can't mount that muffler horizontally?


EDIT: How much did it cost you?
It would hang lower horizontally.
YariceVictorville, CA · Nov 1, 2008#19
Don't get me wrong but im a big Tanabe fan, but the exhaust is not my cup of tea just by how it looks mounted, ppl who will see the exhaust on the yaris are gonna think that who ever installed you muffer did it wrong.
CASTREXCosta Rica · Nov 1, 2008#20
Originally Posted by largeorangefont ↑
It would hang lower horizontally.
That's right. The reason is mounted vertically is to be able to hang it higher.

This car has very little space back there to mount a muffler.

Other aftermarket mufflers hang way lower.
cali yarisCanoga Park, CA · Nov 1, 2008#21
I never had any trouble with it.
largeorangefontSo Cal, OC · Nov 1, 2008#22
.
largeorangefontSo Cal, OC · Nov 1, 2008#23
I actually copied the Tanabe style on my custom axle back. I have more clearance than stock.

Picture not included in this copy
bikegermNashville, TN. · Nov 1, 2008#24
That looks pretty cool !! 👍
cleongSingapore · Nov 1, 2008#25
The way the muffler canister is so close to the wheel, you will never be able to compress the rear suspension enough for the muffler to scrape the road. You'd break something in your suspension first.

The only way you might hit it is if you backed up into something.
ZINGLebanon, Middle East. · Nov 1, 2008#26
Originally Posted by largeorangefont ↑
It would hang lower horizontally.

Would it? I don't know, it might be my lack of sleep, but I can't see how it would hang lower horizontally.

Well if noones having problems with it I might still stick to getting one. As far is looks is concerned, I like it.
Benggolf2Richmond, B.C., Canada · Nov 1, 2008#27
Originally Posted by cleong ↑
The way the muffler canister is so close to the wheel, you will never be able to compress the rear suspension enough for the muffler to scrape the road. You'd break something in your suspension first.

The only way you might hit it is if you backed up into something.
Cleong is correct. The way the factory designed the canister and mounted it is correct. No issues noted. 👍
largeorangefontSo Cal, OC · Nov 1, 2008#28
Originally Posted by ZING ↑
Would it? I don't know, it might be my lack of sleep, but I can't see how it would hang lower horizontally.

Well if noones having problems with it I might still stick to getting one. As far is looks is concerned, I like it.
It will.

Here is the Megan unit.


http://www.youtube.com/watch?v=f1Y_MCE7_tE
largeorangefontSo Cal, OC · Nov 1, 2008#29
Originally Posted by ZING ↑
Would it? I don't know, it might be my lack of sleep, but I can't see how it would hang lower horizontally.

Well if noones having problems with it I might still stick to getting one. As far is looks is concerned, I like it.
It will.

Here is the Megan unit for example.

http://www.youtube.com/watch?v=f1Y_MCE7_tE