BrazdonWOriginal postColumbia, MD · Oct 28, 2008#1im going to replace them with amber ones
i wired them up to the turn signals because i didn't want them running all the time
it's a little too much going on for me
Replies 12
BrazdonWThread starterColumbia, MD · Oct 28, 2008#2bump
battleversiontc808 · Oct 28, 2008#3probably a 3mm led with a 470 resistor or a 5mm led with a 470 resistor standard two prong led
MidonGainesville, TX · Oct 29, 2008#4they are not standard 2 prong 5mm LED's they are a 4 prong. I was going to change mine from white to blue, and noticed they were the 4 prong type mounted on a small PCB. So you will have to de-solder the led and re-solder new one and a resistor inline with it. you can just throw away the wires that came off the old leds seeing as you will have a resistor inline with the new leds
BrazdonWThread starterColumbia, MD · Oct 29, 2008#5thanks for the info :)
battleversiontc808 · Oct 29, 2008#6 Originally Posted by
Midon ↑ they are not standard 2 prong 5mm LED's they are a 4 prong. I was going to change mine from white to blue, and noticed they were the 4 prong type mounted on a small PCB. So you will have to de-solder the led and re-solder new one and a resistor inline with it. you can just throw away the wires that came off the old leds seeing as you will have a resistor inline with the new leds
notice i was quessing probably=guessing
CTScottUSA, CT · Oct 29, 2008#7 Originally Posted by
Midon ↑ they are not standard 2 prong 5mm LED's they are a 4 prong. I was going to change mine from white to blue, and noticed they were the 4 prong type mounted on a small PCB. So you will have to de-solder the led and re-solder new one and a resistor inline with it. you can just throw away the wires that came off the old leds seeing as you will have a resistor inline with the new leds
Can you post a picture of what they look like? Most of the Super Flux type LEDs are in a 4 pin package.
cali yarisCanoga Park, CA · Oct 29, 2008#8battleversiontc808 · Oct 29, 2008#9yup exactly like those damn cali beat me to it but if you need 4 prong surface mount leds you can get them there to there pretty good with warranties and shipping stuff out and there prices are cheap ive been trying to get these guys on the forums since they advertise on scionlife.com
BrazdonWThread starterColumbia, MD · Oct 29, 2008#10great!
once i get my paycheck i will look into hooking up the ambers :)
MidonGainesville, TX · Oct 30, 2008#11I'll go take a pic and post it I'll remove one t get a good pic
MidonGainesville, TX · Oct 30, 2008#12k just removed one it is on a 194 base so just get any 194 type led bulb like the ones in the map lights like these.
Picture not included in this copy
you will need 6 total 3 per side. if you want to wire them up to the turn signal then just wire them to the turn signal in the top of the headlight. the white wire on the led's are the positive and the black is the negative. just remember the highleds have resistors installed in them so don't wire up the resistor pack that the 3 leds are currently installed with you can just discard it.
battleversiontc808 · Oct 30, 2008#13get em cheap at superbrightleds.com, but doesnt it also matter on who makes them so they could be all different types of bulbs cause the ones that came with my headlights on my tc was a two prong led and i had like 10 of them wired together with resistors in line