Yarisworld Archive

Black Toyota Emblem [pics]

112 posts · 37,444 views · page 1 of 3

Chris07LBOriginal postNew Jersey · Aug 26, 2006#1
Quick few pic's for you guys, and mainly ChinoCharles, that was interested in how it would look.

Please excuese the extremely dirty Liftback, and poor lighting.. 😳

Painted Flat Black.

Some will like, most will hate. 🙄

3 attachments not included in this copy

Replies 111

ChinoCharlesOH · Aug 26, 2006#2
Dude, that looks amazing! What kind of paint did you use? It'll look even better with some tint.
Chris07LBThread starterNew Jersey · Aug 26, 2006#3
Originally Posted by ChinoCharles
It'll look even better with some tint.
.....Yea it will. 😉
ECHOKnight2000Minnesota, US of A! · Aug 26, 2006#4
That looks really really nice Chris! Of course it doesn't hurt to have a white car, I'm wondering if this "mod" will look good with any color as obviously darker colors it won't stick out that well. Anyway looking good! It really complements the car well, are you going to do the front as well? Did you just take of the emblem and then put it back on? If so how did you do it? Thanks for the pics!🤘 🙇
esquivaSouth Cali · Aug 26, 2006#5
nice!....poor lighting made it not-so-extremely-dirty...hehehe...looks good bruh
Chris07LBThread starterNew Jersey · Aug 26, 2006#6
Yes, I did it the correct way... Removed, prep'd, primered, painted, new body tape, re-installed, DONE!

If anyone would like a How-To, I will break it all down again, but would need someones rear emblem to document the rest.
ChinoCharlesOH · Aug 26, 2006#7
A few questions Chris...

1. What do you mean by new body tape?

2. What kind of paint did you use?

3. Any issues with removing the decklid panel to get to the badge? Where did you start/end popping the tabs off?
LowfrontWorcester MA · Aug 26, 2006#8
I like it
paultyler_82USA · Aug 26, 2006#9
That looks really nice, Chris! Reminds me a bit of the appearance of the Black Pearl Plated emblems that Toyota used to offer as a dealer accessory.
KatanaUnder the hood! · Aug 26, 2006#10
Dammit mine is black, so no painting for me...
spacemanoeuvresBucks County, PA · Aug 26, 2006#11
that looks so sweet on the white hatch, nice job 👍
Chris07LBThread starterNew Jersey · Aug 26, 2006#12
Didn't think anyone would actually like it!

I will be sure to take better pic's once I wash the car, and it stops raining out.... booo rain! 🙁
hasher22Australia Sydney · Aug 26, 2006#13
i wonder what it will look like if you used gloss paint? make it all nice and shiny....
Chris07LBThread starterNew Jersey · Aug 26, 2006#14
Originally Posted by hasher22
i wonder what it will look like if you used gloss paint? make it all nice and shiny....
Nice as well I'm sure. Its a personal thing.

Nothing is gloss black on my car (all factory plastics are satin), so using a Flat Black, to get the look I wanted.
hasher22Australia Sydney · Aug 26, 2006#15
OOO ya ya i get ya...........

it blends heaps well with the wiper and the button boot thingy bobby....haha, looks hot as well cuz theres no chrome around ur car.

10/10 ;)

Ps. Thats a dirty yaris?? hahah you should see mine, you can see the fingermarks from the dirt when opening the boot. It looks like ive stuck people in the boot and they are tryin to get out. I cant be bothered washin it

i saw this black toyota and she painted her symbols red.......BAD IDEAD looked like ummm whats the word...............SHIT
paultyler_82USA · Aug 26, 2006#16
Originally Posted by Katana
Dammit mine is black, so no painting for me...
Why not... then it would be stealthbadged like those bodycolor badges Chevy loves so much.
riceboyCAN · Aug 26, 2006#17
not bad.. did you match the front too?
juniorDUVAL · Aug 26, 2006#18
that looks so SWEET!
my polar white hatchback is coming off the boat on monday...a couple more days for processing and we're in business. this is definitly one of the first things im gonna do.
i was thinking of de-badging as per the previous several threads... but i think black "toyota" and "Yaris" badges would compliment this look.
think i could re-attach the badges without making it look totally ghetto? any suggestion would be greatly appreciated... ie, types of adhesive ...perhaps some kind of template for properly aligning the badges...
anything else anyone might anticipate.
03Z33SoCal · Aug 26, 2006#19
If you where to remove the badge completely does it leave hold in the hatch? how noticeable is the indentation?
Yaris YabaThailand · Aug 27, 2006#20
You planning to do the front emblem also?
Chris07LBThread starterNew Jersey · Aug 27, 2006#21
Originally Posted by 03Z33
If you where to remove the badge completely does it leave hold in the hatch? how noticeable is the indentation?
Very.. looked like crap. Besides the two offset alighnment pin holes dont help the look either.
Chris07LBThread starterNew Jersey · Aug 27, 2006#22
Originally Posted by Yaris Yaba
You planning to do the front emblem also?
Got other plans for the front one... 😎
BooMadison, WI · Aug 27, 2006#23
I like that high contrast on Polar White.. Looks sweet.👍
boxerboyNorth Carolina · Aug 27, 2006#24
Looks good. 👍 What type of paint did you use?
SmellyTofuSydney · Aug 29, 2006#25
Here's some use for the tail light tinting paint maybe?
JustAnotherAsianmilpitas / santa rosa · Aug 30, 2006#26
Originally Posted by Chris07LB
Got other plans for the front one... 😎
oh snaps. i liked the flat black emblem, but after that^ now i'm keepin tabs on this one. 😉
spacemanoeuvresBucks County, PA · Aug 30, 2006#27
Originally Posted by Chris07LB
Got other plans for the front one... 😎
Again, looks sweet with the white hatch; it would look good with almost any body color except flint mica or black.

I think I'll give this mod a go at some point.

Painting the front emblem the same color as the car would prob compliment the flat black in the rear pretty well too...can't wait to see what you have in store for us 👍
Chris07LBThread starterNew Jersey · Aug 30, 2006#28
Originally Posted by spacemanoeuvres
can't wait to see what you have in store for us 👍
If I could only fit my hands behind the stupid grill, Id have it off already!!! 😠

How the hell are you people getting your fingers inside the honeycomb grill?!? 🤷
riceboyCAN · Aug 30, 2006#29
Originally Posted by Chris07LB
If I could only fit my hands behind the stupid grill, Id have it off already!!! 😠

How the hell are you people getting your fingers inside the honeycomb grill?!? 🤷
Had the gf do it...
Chris07LBThread starterNew Jersey · Aug 30, 2006#30
Originally Posted by riceboy
Had the gf do it...
Send her over, my sausage fingers barely get past the fingernail! 😆
riceboyCAN · Aug 30, 2006#31
Yeah I'm part of that club too... that grill had me close to insanity...
JfoofooNew Jersey · Sep 4, 2006#32
Great.. I like the flat black.. great choice with your white Yaris... however mine is silver.. not sure if it will stand out as well as yours..
Chris07LBThread starterNew Jersey · Sep 5, 2006#33
Originally Posted by Jfoofoo
Great.. I like the flat black.. great choice with your white Yaris... however mine is silver.. not sure if it will stand out as well as yours..
Would be even better on silver IMO. 🙂
ChinoCharlesOH · Sep 5, 2006#34
Originally Posted by Chris07LB
Would be even better on silver IMO. 🙂
Read my mind.
Chris07LBThread starterNew Jersey · Sep 5, 2006#35
Originally Posted by ChinoCharles
Read my mind.
**Sure, I can do that........ you are thinking of a cheesburger or chicken burger for dinner tonight....... small frosty to wash it all down..... and maybe, just maybe splurge on a Biggie fry **

Was I close to reading your mind Charles?
tomjaszLost Wages · Sep 5, 2006#36
Originally Posted by Chris07LB
If I could only fit my hands behind the stupid grill, Id have it off already!!! 😠

How the hell are you people getting your fingers inside the honeycomb grill?!? 🤷

What a pain that is! I have a couple of Toyota PDF files showing how to disassemble half the car to perform many mods....SHEESH!!!!!
Chris07LBThread starterNew Jersey · Sep 5, 2006#37
After typing that, I figured out a simple way to remove it from the FRONT of the emblem. 😎
ChinoCharlesOH · Sep 5, 2006#38
Originally Posted by Chris07LB
**Sure, I can do that........ you are thinking of a cheesburger or chicken burger for dinner tonight....... small frosty to wash it all down..... and maybe, just maybe splurge on a Biggie fry **

Was I close to reading your mind Charles?
It was chicken lo mein, fried rice, an egg roll, a McFlurry and a hi-c. Most other nights you would have been right, though. I needed my doseage of MSG.

And let me guess... you're on a liquid diet? 🍻
Chris07LBThread starterNew Jersey · Sep 6, 2006#39
Originally Posted by ChinoCharles
And let me guess... you're on a liquid diet? 🍻
I'm lucky if I get to kick a few back a month lately.. damn work. 🙁
ChinoCharlesOH · Sep 6, 2006#40
I'll slam one for you next time I'm out.
JfoofooNew Jersey · Sep 7, 2006#41
Originally Posted by Katana
Dammit mine is black, so no painting for me...
you can paint it polar white or red?
JfoofooNew Jersey · Sep 7, 2006#42
Originally Posted by Chris07LB
After typing that, I figured out a simple way to remove it from the FRONT of the emblem. 😎
Mr. Chris07LB can you share that with the rest of the class? 😉
NimbleChicago, IL · Feb 25, 2007#43
Originally Posted by Chris07LB ↑
I'm lucky if I get to kick a few back a month lately.. damn work. 🙁
How? And how did you remove the rear?
BlenjarCT · Feb 25, 2007#44
sexy!

-- Blen
Chris07LBThread starterNew Jersey · Feb 25, 2007#45
Removes easy.

Little heat, and grab an edge with fishing line, and carefully and slowly start to work your way around the emblem.

There are no nuts holding it from the back side, just two pins to keep it positioned correctly on the hatch.

Good luck. 🙂
yrsdrgnSF,CA · Feb 25, 2007#46
how do you "re-glue" it back onto the trunk?
Chris07LBThread starterNew Jersey · Feb 25, 2007#47
3M body tape. Its the thinnest strongest double sided body tape around. Used for holding body kits and spoilers on.
yrsdrgnSF,CA · Feb 25, 2007#48
i'm assuming you can cut it to the desired shape then tape it onto the back of the emblem?
Chris07LBThread starterNew Jersey · Feb 25, 2007#49
Stick it on....................... cut it to the shape using a new razor................ pull off backing................... correctly alight.............. stick, and your done.
The Ho[]y TapeNew Jersey · Feb 25, 2007#50
I'm strongly considering doing this to mine. I just bought one in Meteorite Metallic. If I do it we should do a step by step on mine for everyone. I live in Jersey too.