GROUP BUY - JDM (RS) Vitz LED Tail Lamp ...
365 posts · 110,764 views · page 5 of 8
Replies continued
ha i was about to "chrome" my door handles......or blacken it, but u guys said no lol......guess greeny vitz here beat me to it hey
Don't know which wire connects to which ports.....lost =( can't install today
Damn the west coast!
I believe the shop manual shows how to release the pins from the connector - but I may be wrong. That would beat cutting the wires.
Hmm a little confuse.. maybe someone with a DIY writeup would be excellent :D
A hair clip (those tiny black ones) will do the job of removing the pin from the connector!
Your wife/gf/whatever should have one. :)
So all the harness, bulbs and connectors are in the package ready to go? Just have to reconnect them? That sounds easy!! Waiting for some pics!
Your wife/gf/whatever should have one. :)
So all the harness, bulbs and connectors are in the package ready to go? Just have to reconnect them? That sounds easy!! Waiting for some pics!
So is connector that came with the tails the one that we order for $15?
My friend's VITZ in HK with close look at LED tail...
Picture not included in this copy
Picture not included in this copy
So you guys get a complete assembly.
Good.
Why not just install the one, bigsky2?
Good.
Why not just install the one, bigsky2?
RS Rear Bumper!!!! 🙇 🙇Originally Posted by LinksealMy friend's VITZ in HK with close look at LED tail...
Picture not included in this copy
hahaha, what are you trying to say there? Your hair isn't that long! 😛Originally Posted by bigsky2Good one GabL.. I've got a few on my wallet because I keep finding them in my car.
Can't wait to see ur pic and installation....👏Originally Posted by bigsky2Yep it's gonna happen today..
I'm going to install ONE tail light (left).
Will post photos of my half ass job later.
Molex Pin Removal:
http://www.gruntville.com/howtos/psu_sleeve/page6.php
Picture not included in this copy
You should be able to find the removal tool at Radio Shack/Comp USA/similar.
http://www.gruntville.com/howtos/psu_sleeve/page6.php
Picture not included in this copy
You should be able to find the removal tool at Radio Shack/Comp USA/similar.
But for us getting the RS LED tail, we don't have to replace the pins right? Just have to take it out and plug into the new connector?Originally Posted by bigsky2Just have to make sure it's small enough for the pins used for the Yaris.
Wow, those tail lights look 10x better then the stocker one.
Not! The guys at Comp USA looked at me like I was making shit up.Originally Posted by ViolinYou should be able to find the removal tool at Radio Shack/Comp USA/similar.
I did run into a licensed electrician at Radio Shack who directed me to an electrical supply house or alarm supply place.
Make sure to post it in the "Official half ass one JDM RS Tail Light Installation" thread in the photos section.... 😁Originally Posted by bigsky2Yep it's gonna happen today..
I'm going to install ONE tail light (left).
Will post photos of my half ass job later.
Alright I am going to try installing tomorrow too
Dude, try a paperclip, works best for me on computer molex plugs, you should be able to squeeze it between the plastic and the pin, and shove the tab down.Originally Posted by bigsky2Word of caution regarding molex extractors/removal tools:
- Make sure the tool you purchase can remove SMALL pins
- Standard molex extractors for computer molexes will not work because the pin inside the Yaris molex is too small
- The molex extractor must be able to fit over the female pin entirely so that it can push the clips down
I think I'm going to destroy the stock molex plug with a razor blade and knife and extract them the sloppy way.
Updates to follow...
I haven't looked... are the pins round or square?
I'm taking the connector I got from japan for fit and going by an electrical supply house this morning.
We might need to save our stock lights (and connectors) for inspection.
I'm taking the connector I got from japan for fit and going by an electrical supply house this morning.
We might need to save our stock lights (and connectors) for inspection.
Think this would work?
Picture not included in this copy
The electrical supply house didn't have one and the alarm supply shop only sells to the trades. I could have built my own space shuttle easier than getting all the parts I need to install these lights.
Picture not included in this copy
The electrical supply house didn't have one and the alarm supply shop only sells to the trades. I could have built my own space shuttle easier than getting all the parts I need to install these lights.
Nice!!! Did you need to pay any tax on the shipment?Originally Posted by echo_hrsWell they're in , just not wired...
Picture not included in this copy
Cheers
Oh god those are pretty.
Yeah hey got my JDM tail ^_____________^
1 attachment not included in this copy
That's awesome!! How was the installation? Mind doing a walk through to us?Originally Posted by TeruyumeYeah hey got my JDM tail ^_____________^
Too late. He's gone cruising.
Thanks - I already looked at mine.Originally Posted by bigsky2Pins are square at the head (female), but round around the stripped wire.
Like this right? Picture not included in this copy
Do you think that tool I posted earlier will do the trick?
i didn't used any tool to take out the wires i just used sidecutter and destory the old connector lol...........
the rest of the stuff is easy just plug into the correct hole and plug into the light
the rest of the stuff is easy just plug into the correct hole and plug into the light
oh yeah by the way did u guys got tax on the lights, i have to pay CA$91.04 for both lights
Revenue Canada is making good money on this group buy! 😠Originally Posted by bigsky2Sounds right.
I paid $44.05 for the left side.
Still waiting for customs to release the right side to CanadaPost so they can deliver it.
In fact, we had to pay a total of $16 for handling fee for this EMS shipment... 😠
The offer still stands on joining the Union.
😁
😁
Looks wicked, I'm so jealous......... I wish I had an Orange Copper Mica so that my tails would already be installed too....
What was the discussion about? Maybe I should talk to them a bit too since I still didn't get my lights!!!Originally Posted by bigsky2Okay guys, had a long discussion with Canada Customs, and my RIGHT SIDE tail light is now released to Canada Post for sortation.
Hopefully I'll get my tails by Thursday afternoon, and installed by Friday.
WOO!
Alright, where to begin.....
First of all, a BIG HUGE THANK YOU to TERUYUME!!!!! 👍 👍 👍 For coming out late at night to set the record for tail lamp install at under 20 minutes!!! Check the second picture for the now totally destroyed stock connectors... (kinda blurry)
One thing I have to say is that I never really knew how good they would really look until they were installed.... they are amazing.... makes the car so much nicer.... you'll see in the small details with how the lines of the car finish off in the rear... and how the LEDs just give the car a much sportier and elegant look...
For those who are still waiting on their orders, please let me know if you don't receive by next week. I know that some of you have been experiencing delays, and I apologize for this, however its in the hands of customs.... so please be patient.....
As soon as everyone receives there lights and bulbs/bulbholders/wiringharnesses (Violin), we can officially shut down this thread.. In the meantime.. enjoy the pics.. and I can't wait to see more pics of installed lights as they're completed.
PS There's no shame in checking out the ass of another Yaris when it has JDM Tails... it's mesmerizing....
First of all, a BIG HUGE THANK YOU to TERUYUME!!!!! 👍 👍 👍 For coming out late at night to set the record for tail lamp install at under 20 minutes!!! Check the second picture for the now totally destroyed stock connectors... (kinda blurry)
One thing I have to say is that I never really knew how good they would really look until they were installed.... they are amazing.... makes the car so much nicer.... you'll see in the small details with how the lines of the car finish off in the rear... and how the LEDs just give the car a much sportier and elegant look...
For those who are still waiting on their orders, please let me know if you don't receive by next week. I know that some of you have been experiencing delays, and I apologize for this, however its in the hands of customs.... so please be patient.....
As soon as everyone receives there lights and bulbs/bulbholders/wiringharnesses (Violin), we can officially shut down this thread.. In the meantime.. enjoy the pics.. and I can't wait to see more pics of installed lights as they're completed.
PS There's no shame in checking out the ass of another Yaris when it has JDM Tails... it's mesmerizing....
bigsky2, your car... it's winking at me!
Picture not included in this copy
Picture not included in this copy
Okay i guess i am going to post my pics up too! here you guys go! sorry for poor quality pics =)
3 attachments not included in this copy
Local parts shop's got them, about $250 per pair including wiring harness ;) They also have the ones with the grey sides (the ribbed looking area), but quite a bit more more expensive. I'm not sure which ones I'll end up getting 😁Originally Posted by bigsky2Haha, I didn't notice that until you pointed it out.
Maybe it wants you to get a set for yourself (remember, TWO tail lights not use one) 😉
Ready for pickup, will get them tomorrow night!! Good long weekend project!! hehe
Taxes on them are $45 and $42 respectively... dunno why the difference.
Taxes on them are $45 and $42 respectively... dunno why the difference.
Hey bigsky, the pics doesn't work?Originally Posted by bigsky2bigsky2's Half Ass JDM Tail Light Install (with PICS!)
So I bit the bullet and decided to install the ONE tail light I did receive.
Edit: ok, it's working now...
tca4 looks good...
Note: The remaining two sets of tails have been shipped out, please check emails for tracking numbers.
Note: The remaining two sets of tails have been shipped out, please check emails for tracking numbers.
still waiting on a tracking number and/or my taillights, but everyone elses look amazing!
Wow! Looking really good guys! So the people who got their JDM lights, what are they doing with the original ones? Anyway great pictures!
those lights are sick!!! im jealous!!! 👏 🙇
Me 2...Originally Posted by echo_hrsPut mine in the Toyota boxes my JDM tails came in, for now I'll just keep them in the garage...I can't imagine much of a market for these unless someone needs a replacement or wants to experiment with smoking the lenses or whatnot...
Cheers
Already smoked mine :)Originally Posted by echo_hrsPut mine in the Toyota boxes my JDM tails came in, for now I'll just keep them in the garage...I can't imagine much of a market for these unless someone needs a replacement or wants to experiment with smoking the lenses or whatnot...
Cheers
Picture not included in this copy
Got mine, will install this weekend!
Did I mention that you all suck?
They do have the non RS taillights there in Japan... 😳Originally Posted by bigsky2We should look for Japanese owners who want to do a USDM swap 😉
Patience Violin... you'll have us all drooling once you get your one of a kind lights installed!!! Hell you can have your very own modellista section!!!