99% sure. I'm not expecting any international shipments at my office except for them. I'll know tomorrow.Originally Posted by riceboyAre you sure??? 😕
GROUP BUY - JDM (RS) Vitz LED Tail Lamp ...
365 posts · 110,764 views · page 4 of 8
Replies continued
Nothing yet,.. I'm still waiting to hear back about it...
Got them!!!!
Picture not included in this copy
Picture not included in this copy
Slight problem though. They lack the wiring harness pictured in the ones RoninMax got. The instructions (in Japanese) show you removing the harness from the stock headlights and using it on these. That would be great if I owned a Vitz RS.
I'll scan in the instructions and post them.
Picture not included in this copy
Picture not included in this copy
Slight problem though. They lack the wiring harness pictured in the ones RoninMax got. The instructions (in Japanese) show you removing the harness from the stock headlights and using it on these. That would be great if I owned a Vitz RS.
I'll scan in the instructions and post them.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Tap..tap...tap...
Is this thing on?
Is this thing on?
I would have them installed already if I had the correct wiring harness. It's two bolts and a gentle tug to remove the tail light.
I hope I don't have to make a harness. The bulb holders are standard. I wonder where I could find the three pin connector for the LEDs (center hole in gasket).
I hope I don't have to make a harness. The bulb holders are standard. I wonder where I could find the three pin connector for the LEDs (center hole in gasket).
It's also possible that the red tail lights come with the wiring like in RoninMax's photo.
If it's the same as the Canadian RS, I may have to ask a favor from one of you.
If it's the same as the Canadian RS, I may have to ask a favor from one of you.
Sorry to say that, you purchased just the Lens only. The picture I post in the forum is the Tail Light Assy. means Len, light bulb, harness, everything to make it work. Now, you need to purshase the light bulb & harness to make it work. Let me check the part # and see how much it is cost. I hope everyone in this group buy buy the whole LED Assy. instead of Lens only.
Thanks Max. PM me when you find out.
I noticed that on japanparts.com lists mine as "CLEAR COMB.LAMP (REAR)" and the red ones as "JDM TAIL LAMP ASSY. L/R" .
"Assembly" might be the key word here.
I noticed that on japanparts.com lists mine as "CLEAR COMB.LAMP (REAR)" and the red ones as "JDM TAIL LAMP ASSY. L/R" .
"Assembly" might be the key word here.
was just about to ask if the one japanparts sells is the complete kit with lens, bulb, harness. Anyone know??Originally Posted by ViolinThanks Max. PM me when you find out.
I noticed that on japanparts.com lists mine as "CLEAR COMB.LAMP (REAR)" and the red ones as "JDM TAIL LAMP ASSY. L/R" .
"Assembly" might be the key word here.
Despite the obvious issues, those tails still look awesome. Can't wait to see them on! (No more than you can't wait I'm sure Violin!)
Finger crossed.Originally Posted by echo_hrsThese lenses are an upgrade for the JDM RS, which comes standard with the LED clusters the rest of us bought, so I assume the rest of us will get the bulbs and connectors included...
Cheers
actually i did, but they may take some time to answer. I thought I'd check to see if anyone here new 😉Originally Posted by bigsky2Why not email them directly?
Violens tails look different to me for some reason. Aren't the JDM tails all red?? Or maybe I've been seeing them wrong this whole time.
The JDM tails are red.
Mine are cooler.
Mine are cooler.
😆 good answer.Originally Posted by ViolinThe JDM tails are red.
Mine are cooler.
Imagine my surprise to get home, check yarisworld.com and see that 3 pages have been added to this thread. Right now I'm in the process of getting everything straightened out as I was under the impression that we would be receiving complete assemblies. As soon as I have more information I will update everyone. Please feel free to PM if you have any further questions or concerns.
Thanks for taking care this for us. 👏 👏Originally Posted by riceboyImagine my surprise to get home, check yarisworld.com and see that 3 pages have been added to this thread. Right now I'm in the process of getting everything straightened out as I was under the impression that we would be receiving complete assemblies. As soon as I have more information I will update everyone. Please feel free to PM if you have any further questions or concerns.
No word back yet.. since it's night time over there I'll wait until this evening to touch base with them again.
Has anyone given any thought to reflectors to make up for the loss of the built-in reflectors in the stock tails?
I'm thinking that the mini cooper fender arch reflectors for the side and 4 or six small reflectors along the top of the hatch (above the window) would look best. Perhaps a couple of ~1"x4" next to the license plate?
mini cooper arch reflectors:
Picture not included in this copy
I'm thinking that the mini cooper fender arch reflectors for the side and 4 or six small reflectors along the top of the hatch (above the window) would look best. Perhaps a couple of ~1"x4" next to the license plate?
mini cooper arch reflectors:
Picture not included in this copy
Originally Posted by ViolinHas anyone given any thought to reflectors to make up for the loss of the built-in reflectors in the stock tails?
I'm thinking that the mini cooper fender arch reflectors for the side and 4 or six small reflectors along the top of the hatch (above the window) would look best. Perhaps a couple of ~1"x4" next to the license plate?
mini cooper arch reflectors:
Picture not included in this copy
Those are not just reflector. They are reflector housing.
So if you going to use it, you need to drill a hole on your bumper.
Guys should have news within the next 48hrs....
Even if they mount with posts (which is likely), I could cut them off and affix with adhesive.Originally Posted by BooThose are not just reflector. They are reflector housing.
So if you going to use it, you need to drill a hole on your bumper.
My concern is that if someone plows into my parked car and leaves, an alert insurance inspector may deny the claim if I don't have reflectors.
👍 I finally got a reply from japanparts.com about there taillight assy. this was their response...
Thank you for your inquiry.
Actually our business style is when we receive order form from the customer,
we would order the parts to manufactured company.
In other words, we do not have any parts in our office.
So we can not confirm whether JDM tail lamp assy is included.
Sorry about it.
Just posting for anyone that may be curious.
Thank you for your inquiry.
Actually our business style is when we receive order form from the customer,
we would order the parts to manufactured company.
In other words, we do not have any parts in our office.
So we can not confirm whether JDM tail lamp assy is included.
Sorry about it.
Just posting for anyone that may be curious.
Originally Posted by ItsMyDailyactually i did, but they may take some time to answer. I thought I'd check to see if anyone here new 😉
Picture not included in this copy
Hey Everyone,
Sorry for the delay, I know its taken some time but I've got some answers. Unfortunately the supplier never clarified that the wiring harnesses would not come included with the assemblies.
The standard JDM tails will come with bulbs/bulb holders, some orders have been shipped out and tracking numbers have been sent out, more tracking numbers to follow....
The wiring harnesses for the JDM tails will run 45.00USD for the set, I'm thinking that perhaps we should wait until we receive the lights to see what can be worked out before spending the extra $$$'s.
Sorry for the delay, I know its taken some time but I've got some answers. Unfortunately the supplier never clarified that the wiring harnesses would not come included with the assemblies.
The standard JDM tails will come with bulbs/bulb holders, some orders have been shipped out and tracking numbers have been sent out, more tracking numbers to follow....
The wiring harnesses for the JDM tails will run 45.00USD for the set, I'm thinking that perhaps we should wait until we receive the lights to see what can be worked out before spending the extra $$$'s.
So......What are the tracking #s for anyways??
I got them with mine - see the photos - just nothing to connect them to.Originally Posted by bigsky2So what about our previous payment for "connectors" ?
Will we still be getting them with the lights?
If all else fails, I may make something on my own.
The connector for the LED's is similar to a connector for a computer fan - that could be modified and secured. The bulb holders are very close to my present stop/tail holder, a slight trimming would probably get this to work. I could order four through my dealer. I'm not sure if there is an amber wedge style bulb that would fit through the hole though. Connectors for the wiring could be a computer item as well.
I'd still like the stock item though, even if it means waiting.
If someone could take a close-up photo of the bulb/bulb holders with a clear view of the wiring, it would help me greatly if I have to make my own.
Connectors are included in the packages. Tracking #'s are for the lights your ordered!
Violin please check PM's, if you want I'll take pics once my tails arrive....
Don't worry about the pics.
Thanks again for your work on this.
I can't wait to get these things on my car!
Thanks again for your work on this.
I can't wait to get these things on my car!
i've got my tracking number, THX riceboy ^___________^
Yeah, I agree, Hyde told me it only took less than 30 mins to modify the USDM plug to fit the JDM LED tailight, Basically just Cut and Paste...Same process as doing the JDM Honda Fit LED tailight...Originally Posted by riceboyHey Everyone,
Sorry for the delay, I know its taken some time but I've got some answers. Unfortunately the supplier never clarified that the wiring harnesses would not come included with the assemblies.
The standard JDM tails will come with bulbs/bulb holders, some orders have been shipped out and tracking numbers have been sent out, more tracking numbers to follow....
The wiring harnesses for the JDM tails will run 45.00USD for the set, I'm thinking that perhaps we should wait until we receive the lights to see what can be worked out before spending the extra $$$'s.
I figure I have about a 10 day wait for the parts I need. I hope I still beat the Canadians.
Based upon this, I don't really see how the wiring harness will be seperate from the bulb holders. You guys might be wise to hold off on ordering anything else, especially looking at the photos of RoninMax's lights.
Picture not included in this copy
I'll probably wind up with spare parts but that sure beats too few.
Picture not included in this copy
I'll probably wind up with spare parts but that sure beats too few.
🤘 this wait is killing me!!! good thing i have all my ice done hehe, love the ride now.
too bad i can't use them in my car...😢😢😢😢😢
So I guess the race is on for the first post in the official JDM Vitz LED Tail Lamp photo section.............
No tracking number yet still...
edit: Got the tracking numbers, thanks riceboy. But nothing showing on the Purolator website yet...
edit: Got the tracking numbers, thanks riceboy. But nothing showing on the Purolator website yet...
Same here got tracking # but nothing showing on the Purolator website too
ok, my shipment is "International shipment has left the origin country and is en route to Canada".
However, I got two tracking number? Are they shipping the two (LH and RH) lights seperately?
However, I got two tracking number? Are they shipping the two (LH and RH) lights seperately?
So what other fee do we have to pay when they arrive at my door?
cool thanks for the detail explaination :)
I believe this is why they are shipped as two pieces.. sorry for any confusion!Originally Posted by echo_hrsMe Too, I would expect they are seperate because package size and weight affects cost considerably...
Cheers
I can't believe you guys get taxed on this.
You should really just give up on this whole pipe dream of maintaining a separate country and join us.
You should really just give up on this whole pipe dream of maintaining a separate country and join us.
Yup, its sucky but it helps to take care of a lot of things that you guys pay for otherwise....Originally Posted by ViolinI can't believe you guys get taxed on this.
You should really just give up on this whole pipe dream of maintaining a separate country and join us.
😆 You guys are too easy.
Besides, if we absorbed you, we wouldn't be able to say we were Canadian when we travel overseas.
Picture not included in this copy
Besides, if we absorbed you, we wouldn't be able to say we were Canadian when we travel overseas.
Picture not included in this copy
Got mine today but holy shiiittt i have to pay another 80 something bucks for tax!!....
Ouch!