His don't look too purple yet, my rear window visor is getting really purple too, I will just paint it black.
OFFICIAL Yaris SEDAN thread
1,659 posts · 1,623,165 views · page 28 of 34
Replies continued
No problem. 99% of my stuff are Meguiar's. I'd go with those. For a wash mitt, make sure it's long haired and not short.Originally Posted by 1.5 ↑Thanks for sharing your secret, I am excited to try these steps on my next wash. Do you have any recommendation for products?
👍
Originally Posted by matthewai ↑hey KL looks awesome but have you ever thought of color matching those rain guards? i just did due to the purple sun fade no disrespect
Mine are definitely an ugly purple, even though I've clay barred and waxed them over the years. I'll just buy a different set in the future as these aren't as functional as I'd like them to be. 😆Originally Posted by 1.5 ↑His don't look too purple yet, my rear window visor is getting really purple too, I will just paint it black.
Because shopping cart. rotflmao
Picture not included in this copy
Picture not included in this copy
Lol ^ I have a picture somewhere of mine in the bottom of a staircase lol.
lol, post it up.Originally Posted by 1.5 ↑Lol ^ I have a picture somewhere of mine in the bottom of a staircase lol.
I did it a couple of times before as well at my college:
Picture not included in this copy
Picture not included in this copy
Posting the new look of my Yaris after the following;
TEIN S-Tech Lowering Springs
TEIN Badge
HID 8K on Headlight and 6K on fog lights
Headlight Washer
Euro Plates
Euro Plate Holder
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
TEIN S-Tech Lowering Springs
TEIN Badge
HID 8K on Headlight and 6K on fog lights
Headlight Washer
Euro Plates
Euro Plate Holder
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Much better now that it's lowered. mmm, no amber headlights (turn signals)
Originally Posted by Kaotic Lazagna ↑So, my usual routine goes something like this:
-Thoroughly rinse the car off with a jet stream of water, including rims
-soap one panel at a time (one side of the wash mitt using no additional pressure, then flip over and apply pressure, all in linear movements, NEVER circular)
-rinse off the mitt
-move onto the next panel
-rinse off the mitt
-after two or three panels, go back and rewipe the previous panels with fresh soap to prevent any water spots or soap spots
-after the whole car is soaped, rinse thoroughly with jet stream of water
-remove hose head, and turn water to half power at most, and go over entire car to "water dry"
-spray Quik Detail spray on one panel and dry (I use an Absorber), then repeat for other panels (wring out the Absorber after every panel)
-change hose head to shower, and re-rinse the wheels
-soap the wheels (I use a different wash mitt designated solely for wheel duty)
-rinse the wheels with shower setting
-spray Quik Detail on rims and dry (using a different Absorber designated solely for wheel duty)
I don't even wanna list out what I do for a full detail job, but for waxing, it's apply wax section by section in the shade, and again, in linear motions, not circular. Conduct swipe tests to see when the wax is ready to be buffed off. For me, that's usually when I'm done applying wax to the entire car.
Buff off in the same linear movement or perpendicular, your chioce, just not in circular motions.
Once all the wax has been buffed off, turn water to half power (no hose head), and go over car to depolarize the surface.
Then repeat the drying process with the Quik Detail. lol
Wash once at least once a week, wax at least once a month, and a full detail at least once a year.
Full detail includes wash, claybar, polish, and wax for me (I see no point in sealing the paint when there's a clear coat over it). Polish is about the same steps as waxing, but you don't wait for it to fully dry before buffing off.
If you don't want to marr the paint and create swirl marks, never do anything in a circular motion, always in linear movements. You can try to correct swirl marks by using Swirl-X, and for heavily oxidized areas, Ultimate Compound. If you, or anyone has any questions about detailing, let me know.
def just bookmarked this post, thanks for the tips🙇
lol, no problem 😉 😛Originally Posted by david_827 ↑def just bookmarked this post, thanks for the tips🙇
looking good Laz ...
how do you do a video with a music ? i want to learn :P
how do you do a video with a music ? i want to learn :P
that's the next one. actually, having problems with the ride height. i still want to drop it more. but the available springs here in the phils are all maxed at 1.5 drop.Originally Posted by Kaotic Lazagna ↑Much better now that it's lowered. mmm, no amber headlights (turn signals)
what do you think i can do? cut the springs to drop it more?
thanks.
Thanks. I used Adobe Premiere to make this video. But you might be able to do the same using a video making program that may have been installed on your computer/laptop. 👍Originally Posted by vten ↑looking good Laz ...
how do you do a video with a music ? i want to learn :P
I'm not a fan of cutting springs, although I came really close to cutting mine when all my friends were getting coilovers. 😆Originally Posted by ruvios ↑that's the next one. actually, having problems with the ride height. i still want to drop it more. but the available springs here in the phils are all maxed at 1.5 drop.
what do you think i can do? cut the springs to drop it more?
thanks.
I would say save up for coilovers or airride 😉 That's what I'm doing. LOL
pre, I think Tein has 1.75 drop, one of our friend here installed it and I can say that it totally dropped his car...the problem is that he is having a 15" wheel and has a problem during humps. so we suggest him to change his wheels and make it 16 or 17...Originally Posted by ruvios ↑that's the next one. actually, having problems with the ride height. i still want to drop it more. but the available springs here in the phils are all maxed at 1.5 drop.
what do you think i can do? cut the springs to drop it more?
thanks.
My Tein S.Tech's dropped my car at leas 2". lol. But like I've said somewhere here, I think the PI has two different versions 🤷Originally Posted by xtremist ↑pre, I think Tein has 1.75 drop, one of our friend here installed it and I can say that it totally dropped his car...the problem is that he is having a 15" wheel and has a problem during humps. so we suggest him to change his wheels and make it 16 or 17...
coiloversOriginally Posted by ruvios ↑that's the next one. actually, having problems with the ride height. i still want to drop it more. but the available springs here in the phils are all maxed at 1.5 drop.
what do you think i can do? cut the springs to drop it more?
thanks.
looking good btw
This is my humble ride.
Its all white and i was thinking to get some decals or stuffs like that. kindly advise and help me people!!!
Picture not included in this copy
Its all white and i was thinking to get some decals or stuffs like that. kindly advise and help me people!!!
Picture not included in this copy
nice... car would be perfect with these shoes though:Originally Posted by link ↑This is my humble ride.
Its all white and i was thinking to get some decals or stuffs like that. kindly advise and help me people!!!
Picture not included in this copy
Picture not included in this copy
Pearl white rims and bronze/gold brake calipers. 😉Originally Posted by link ↑This is my humble ride.
Its all white and i was thinking to get some decals or stuffs like that. kindly advise and help me people!!!
Picture not included in this copy
correct. 15's with a 1.75 spring will definitely scrape his chasis. and having 17's will give you somehow a lowered look already.Originally Posted by xtremist ↑pre, I think Tein has 1.75 drop, one of our friend here installed it and I can say that it totally dropped his car...the problem is that he is having a 15" wheel and has a problem during humps. so we suggest him to change his wheels and make it 16 or 17...
btw, thanks.
i think you're correct. i might as well grab the coilovers that my friend's offering me. and the good thing there is, it's not stiff unlike the others.Originally Posted by Kaotic Lazagna ↑My Tein S.Tech's dropped my car at leas 2". lol. But like I've said somewhere here, I think the PI has two different versions 🤷
thanks man.Originally Posted by 1.5 ↑coilovers
looking good btw
Oh, which coilovers are they?Originally Posted by ruvios ↑i think you're correct. i might as well grab the coilovers that my friend's offering me. and the good thing there is, it's not stiff unlike the others.
its a TEIN Super Compact. It has a good ride and not stiff since it have 24 way damping adjustment.Originally Posted by Kaotic Lazagna ↑Oh, which coilovers are they?
Nice. I don't think we get that here in the US. How low does it go?Originally Posted by ruvios ↑its a TEIN Super Compact. It has a good ride and not stiff since it have 24 way damping adjustment.
Lookin' good. Crazy tint you got there. Not illegal where you live?
i was thinking the same. i'm starting to believe almost anything goes with the cars in indonesia....Originally Posted by Kaotic Lazagna ↑Lookin' good. Crazy tint you got there. Not illegal where you live?
nothing is illegal in Indonesia :D... at one point , I had 35% on the windshield, and 5% limo tint all around .
That looks excellent. I really want a sportivo kit. Its looks well without any spoiler too.
Picture not included in this copy
nice. yeah, bigger pictures would be cool haha. try uploading on imageshack.usOriginally Posted by SedanDan ↑just had some time to clean the car up this morning... thought I would post a pic... I have the visors (thanks Micro!!!) but didnt have time before work to put them on... will repost pics once they are on!
Picture not included in this copy
Picture not included in this copy
ps I hate that gmail resizes my images differently >.<
Ditched the spoiler for a new look.. hope you guys like it.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
3 attachments not included in this copy
Some nice looking sedans on this page. I love the white one!
And speaking of tint, Ive got 3% all around. 😲
And speaking of tint, Ive got 3% all around. 😲
rye7jen, what brand of window visors are those?
not feeling the rims...Originally Posted by rye7jen ↑Ditched the spoiler for a new look.. hope you guys like it.
had the chance for my friend to paint my headlights:
Picture not included in this copy
i like them a lot :)
Picture not included in this copy
i like them a lot :)
not sure if it has a brand name but i think they are made from thailand..Originally Posted by "G" ↑rye7jen, what brand of window visors are those?
to each their own but thanks! 😁Originally Posted by b20vteg ↑not feeling the rims...
Dude need to get together take some pics of both carsOriginally Posted by LikeCaseyJones ↑Picture not included in this copy
Hey guys, just a quick tip. Try some Meguiars dash and trim for your exterior black plastic areas by your mirrors. Works really well.
Picture not included in this copy
Picture not included in this copy
3% 🎉 i wish i could go that dark around hereOriginally Posted by 1.5 ↑Some nice looking sedans on this page. I love the white one!
And speaking of tint, Ive got 3% all around. 😲
I just finished putting in Alpine Type-R door speakers all around... good god they're oh so clean!
I thought ur car looked more like the one in ur sig. lol where you had that done Photoshop?Originally Posted by ERA ↑had the chance for my friend to paint my headlights:
Picture not included in this copy
i like them a lot :)
yeah. i kinda always wanted a set of mesh wheels and have the flush look when i first got the car. i photoshopped something years ago of what i eventually wanted the car to look like. ive kinda grew out of it since then. instead im fine with lowering springs when i get the extra money.Originally Posted by JumpmanYaris ↑I thought ur car looked more like the one in ur sig. lol where you had that done Photoshop?
Just gave her a bath ;)
Picture not included in this copy
Picture not included in this copy
Damn Laz. I gotta keep my car cleaner lol
LOLOLOLOL, it rained last week for like a couple of days, and she got a little dirty. It's supposed to rain here on Wednesday and Thursday, so I didn't want it becoming mud. hahaha, just makes it easier for me to clean her next time, plus, I wanted to see how good the Collinite 476s wax is. Even with all the dirt, water still beaded and slid off. Some good stuff ;)
I'm lazy lol but being slammed makes me get dirty quickly.