Nice ride, wish i could afford a body kit like that. Or just the RS body kit. But can't find it.
OFFICIAL Yaris SEDAN thread
1,659 posts · 1,623,165 views · page 19 of 34
Replies continued
Damn Jay, you have a sweet looking ride.
Ya that is very nice looking.
Thanks guys!
Just another photo update... with one photochopped heheh :D
Picture not included in this copy
Just another photo update... with one photochopped heheh :D
Picture not included in this copy
kaotic, dayum, how did you get your yaris that low on Tein springs? were on the same springs, but my fender gap is big compared to yours.
Remember in VUG, you guys found that there are two versions of the S.Tech's there in the PI. hahahaha. That's with my rear lifted 1/2" too. hahaha.Originally Posted by jpadua ↑kaotic, dayum, how did you get your yaris that low on Tein springs? were on the same springs, but my fender gap is big compared to yours.
Can't wait for your Vios to look like the PS'ed one once you get your coilovers on.
Originally Posted by .Kevin. ↑hmm
hey sup man, where can i get some of those visors, I have the vios ones now and there not really functional
The window visors you mean?Originally Posted by Dj_SloKid ↑hey sup man, where can i get some of those visors, I have the vios ones now and there not really functional
hmm I just got them off some local shop here... I know there are good ones over there, dont microimage have them?
JP need to get that car some more LOW bro hahaha
hahaha yeah dude... just a little more :D
I got my visors from the dealership 70 dollars installed lol they are REAL solid and light.
Oh and heres my car as of late.
1 attachment not included in this copy
Here are a couple pic's of my TRD equipped aero sedan after finally getting the big wheels bolted up.
2 attachments not included in this copy
Nice clean look
here is my recent look
4 attachments not included in this copy
Jumpmannnn, SO nice how much does it even cost to get TRD Painted on your car from a shop>?
te tienen enbidia bastante jente mi imagino ; b
te tienen enbidia bastante jente mi imagino ; b
its a badge like the ones garm sells I just painted itOriginally Posted by .Kevin. ↑Jumpmannnn, SO nice how much does it even cost to get TRD Painted on your car from a shop>?
te tienen enbidia bastante jente mi imagino ; b
pa Yo no sabia que sabes espanol de donde eres?
The red thing at the bottom left rear door is a garm sold emblem? o,o Those halo headlights are sweet too.
Soy de espania, eso esplica porque escribo algunas cosas differente :) mi nombre real es Antonio si quierias saber xD
Soy de espania, eso esplica porque escribo algunas cosas differente :) mi nombre real es Antonio si quierias saber xD
ohhhh my bad i thought you was talking about the emblems in the trunk,Originally Posted by .Kevin. ↑The red thing at the bottom left rear door is a garm sold emblem? o,o Those halo headlights are sweet too.
Soy de espania, eso esplica porque escribo algunas cosas differente :) mi nombre real es Antonio si quierias saber xD
its just a red decal i got it off ebay
Ohhh que bien yo soy Orlando pero me dicen OJ mucho gusto, Pensaba que eras Canadiense
Oh damn nice, your car would turn tons of heads here seeing as mine being simple does lol its the only 'different' Yaris in town.
Mucho gusto OJ :) nah solo vivo aqui en el frio haha
Mucho gusto OJ :) nah solo vivo aqui en el frio haha
1 attachment not included in this copy
so start modding then.😁
Pregunta que te ago por que Canada?
Pregunta que te ago por que Canada?
I TRY! Money isnt' free sadly.
Eh mi papa vino de Europa con 50 mil Euros i empeso comprar i vender casas ahora vivimos barato pero ya no trabaja el tiene unos 3 mionnes en el banco pienso esta retired i apenas tiene 44 anos lol
Basicamente por mejor vida que no sos un slave para sobrevivir
Eh mi papa vino de Europa con 50 mil Euros i empeso comprar i vender casas ahora vivimos barato pero ya no trabaja el tiene unos 3 mionnes en el banco pienso esta retired i apenas tiene 44 anos lol
Basicamente por mejor vida que no sos un slave para sobrevivir
Serca de que estado en estados unidos vives?
Vivo en Pacific timezone - Cali? Vivo como 10 horas de vancouver i eso es 3 horas de SeattleOriginally Posted by JumpmanYaris ↑Serca de que estado en estados unidos vives?
1000km para llegar a Seattle
i just cringe looking at those tires, they just spell bent rims to me.Originally Posted by JumpmanYaris ↑here is my recent look
lol them wheels are heavy and strong aint nothing gonna happen, the tire will go first if anythingOriginally Posted by why? ↑i just cringe looking at those tires, they just spell bent rims to me.
damn.Originally Posted by MUSKOKA800 ↑Here are a couple pic's of my TRD equipped aero sedan after finally getting the big wheels bolted up.
Picture not included in this copy
Picture not included in this copy
makes me wish i had gone black.
good stuff.
On my way to do some errands, I saw a good opportunity to do a photoshoot. hahahaha. What do you guys think? I didn't have a lot of time, so I couldn't move my car around or to another spot.
Picture not included in this copy
DSC_0001 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0005 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0002 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0004 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0006 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0007 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0010 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0012 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0013 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0001 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0005 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0002 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0004 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0006 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0007 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0010 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0012 by YarisKaos, on Flickr
Picture not included in this copy
DSC_0013 by YarisKaos, on Flickr
Originally Posted by Kaotic Lazagna ↑On my way to do some errands, I saw a good opportunity to do a photoshoot. hahahaha. What do you guys think? I didn't have a lot of time, so I couldn't move my car around or to another spot.
The fist one it's a winner! the light, shadows, colors and the composition are really good and love the depth and perspective of the docks on the right! I'm not a big fan of the stars on the lights but in this case looks good... and of course... your rides looks HOT!
Stunning as usual Kaotic! 🎉
Picture not included in this copy
Derick
👍
6 attachments not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Finally got my AMR coilovers! I'm very impressed.. high quality tooling, great handling, and most especially the ride is great! Feels like im on S.techs.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Looks awesome, Jay. Can't wait to see the full dropped and full raised pics. hahaha
Hey laz.... Ive dropped it significantly already heheh.. take note, im running Falkens, 205/40 stretched over 17x8 so my tire diameter is slightly lower :) therefore already lower by half an inch to begin with, with a bigger fender gap.
Here are photos for comparison
Front Before (Tein S.Tech)
Picture not included in this copy
Front After (AMR Coilovers)
Picture not included in this copy
Rear Before (Tein S.Tech)
Picture not included in this copy
Rear After (AMR Coilovers)
Picture not included in this copy
heheh, lowered more by about an inch on both fronts and rears.
Here are photos for comparison
Front Before (Tein S.Tech)
Picture not included in this copy
Front After (AMR Coilovers)
Picture not included in this copy
Rear Before (Tein S.Tech)
Picture not included in this copy
Rear After (AMR Coilovers)
Picture not included in this copy
heheh, lowered more by about an inch on both fronts and rears.
word up... im new here...finally make a post. juz wanna share my ride. :)
Wheels : LowenHart DEF X2
Spec:
Frnt : 8j et30, 195/40/R17
Rear: 9j et25, 205/40/R17
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
future plan: 25mm spacer 😈
Picture not included in this copy
Wheels : LowenHart DEF X2
Spec:
Frnt : 8j et30, 195/40/R17
Rear: 9j et25, 205/40/R17
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
future plan: 25mm spacer 😈
Picture not included in this copy
Hey good job fitting those rims! good thing you found those tires to stretch on. Did you do 5 lug conversion? or are your rims 4x100?
^^bro... amazed 2 see u here. ur yaris is like everywhere. :) im aceng from VipStyle Society Msia. :)
btw, i bought d wheels from japan 2gether with tires. lucky 4 me,at japan 195/40 aint that rare if compare 2 Msia. lol... i know,i love japan too. 🎉
mine are 4H 100pcd still. :)
btw, i bought d wheels from japan 2gether with tires. lucky 4 me,at japan 195/40 aint that rare if compare 2 Msia. lol... i know,i love japan too. 🎉
mine are 4H 100pcd still. :)
Hey bro! I didnt realize it was you until you replied! good job on the rims! im so jealous hehehe... its so great to find rims that are 4x100 :) changing the knuckle to 5 stud is sorta like cheating hahah LOL. Its really a challenge to find 4x100 rims that are really nice, brand and specs wise, so finding one is like finding gold! heheh congrats bro. I havent seen your update on VIPstylesociety yet... let me check...Originally Posted by aceng ↑^^bro... amazed 2 see u here. ur yaris is like everywhere. :) im aceng from VipStyle Society Msia. :)
btw, i bought d wheels from japan 2gether with tires. lucky 4 me,at japan 195/40 aint that rare if compare 2 Msia. lol... i know,i love japan too. 🎉
mine are 4H 100pcd still. :)
by the way what adjustables are you using?
bro I thought you drove a myvi? heheh
im using local made adjustable brand GAB. from ur pic,our adjustable look d same,only urs is nicer. 👍Originally Posted by jpadua ↑Hey bro! I didnt realize it was you until you replied! good job on the rims! im so jealous hehehe... its so great to find rims that are 4x100 :) changing the knuckle to 5 stud is sorta like cheating hahah LOL. Its really a challenge to find 4x100 rims that are really nice, brand and specs wise, so finding one is like finding gold! heheh congrats bro. I havent seen your update on VIPstylesociety yet... let me check...
by the way what adjustables are you using?
i guess we both ady found our gold ey? but maybe 4 d future im gonna redrill my knuckle coz 4x100 wheels are seriously pricey!! hehe
btw,i ady bought 25mm spacer,now waiting 4 d shipment .... oh wish me luck wit those badass.. im gonna poke n lower. wuts ur future plans bro?
Picture not included in this copy
i was...but ady changed 2 vios/yaris sedan/belta. i need a sedan. lolOriginally Posted by jpadua ↑bro I thought you drove a myvi? heheh
@aceng Damn those are thick!!! nice! your really goin wider!
Just had a quick shoot today hope you guys like the pix
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Just had a quick shoot today hope you guys like the pix
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
its pretty straight up
3 attachments not included in this copy
Ride update: VIOS 08
Still have a long way to go.. but getting there slowly I think :) posting this to share to other vios owners. Vios hard to flush with stance, front liner too shallow. Rear has not camber adjustment. Here are some thing I did to remedy that. Hope this would be useful to other Vios owners.
Added additional -1 degree camber using EZ Shim on rear wheels, so it comes out to about -1.5? (including the natural camber on the drop). Went back to my 5mm spacer, but damn, I felt like I was murdering my tires on the free way... I hate our roads here... I'll try to use a bigger Spring Cushion to lessen the shock play, maybe it would help. Rim to fender now at 5cm, used to be 6cm. Rear dampers at Full Stiff.
Front wheels now at -1 degree camber, also lowered an additional half inch. Rim to fender now at 6cm. Dampers at 5 clicks (1 soft - 8 hard)
Used a heat gun on the liner, it works like a charm!!! Liner rubbing.... GONE!, heated it up, took a wet rag and pushed it in. The water from the wet rag, hardened the plastic in seconds.
Here are some pix:
Picture not included in this copy
Smaller space now in between, much... still flush though no poke. Once I find 205 35 18, I can fix that fitment.
Picture not included in this copy
Had to saw off a portion of my front lip kit to clear the tires when turning. My finger can barely fit in between.
Picture not included in this copy
Now lower about half inch from before. Finally at 0 finger.
Picture not included in this copy
Camberlicious! loving the new camber on the rear.
Picture not included in this copy
Closer view of the side profile, front wheels still flush.
Picture not included in this copy
Thats it for now maybe until I find 205 35 18 for the front, I can lower it some more.
Still have a long way to go.. but getting there slowly I think :) posting this to share to other vios owners. Vios hard to flush with stance, front liner too shallow. Rear has not camber adjustment. Here are some thing I did to remedy that. Hope this would be useful to other Vios owners.
Added additional -1 degree camber using EZ Shim on rear wheels, so it comes out to about -1.5? (including the natural camber on the drop). Went back to my 5mm spacer, but damn, I felt like I was murdering my tires on the free way... I hate our roads here... I'll try to use a bigger Spring Cushion to lessen the shock play, maybe it would help. Rim to fender now at 5cm, used to be 6cm. Rear dampers at Full Stiff.
Front wheels now at -1 degree camber, also lowered an additional half inch. Rim to fender now at 6cm. Dampers at 5 clicks (1 soft - 8 hard)
Used a heat gun on the liner, it works like a charm!!! Liner rubbing.... GONE!, heated it up, took a wet rag and pushed it in. The water from the wet rag, hardened the plastic in seconds.
Here are some pix:
Picture not included in this copy
Smaller space now in between, much... still flush though no poke. Once I find 205 35 18, I can fix that fitment.
Picture not included in this copy
Had to saw off a portion of my front lip kit to clear the tires when turning. My finger can barely fit in between.
Picture not included in this copy
Now lower about half inch from before. Finally at 0 finger.
Picture not included in this copy
Camberlicious! loving the new camber on the rear.
Picture not included in this copy
Closer view of the side profile, front wheels still flush.
Picture not included in this copy
Thats it for now maybe until I find 205 35 18 for the front, I can lower it some more.
I just picked mine up last night...then we got snow
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
here's mine :) sorry pic's a little blurry
first drop of snow for the year woop!
Picture not included in this copy
That's in KM..
Picture not included in this copy
first drop of snow for the year woop!
Picture not included in this copy
That's in KM..
Picture not included in this copy
some new photos
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy