I believe his were for the outside.Originally Posted by Vioz ↑I think he put blue LED's on the inside of the handle or doesn't garm sell those handles? or was garm's LED handles on the outside?
OFFICIAL Yaris SEDAN thread
1,659 posts · 1,623,165 views · page 16 of 34
Replies continued
Is that a Gran Turismo sticker i see on the windshield and rear window? lol
Yes, that Gran Turismo decals!
Was thinking whether to add racing strips to it
Was thinking whether to add racing strips to it
everybody's yaris sedan/vios here is looking good! 🎉
What skirt/rear & front lip kit is that on your car and where'd you get that wing?Originally Posted by link ↑This is mine.
Comments welcome
Picture not included in this copy
Picture not included in this copy
got my car featured on the iputinwork site
Picture not included in this copy
Picture not included in this copy
Okay, since I was a third way into the wear bar on two of my tires and half a mm away from the bars on the other two, I decided to get new tires. I wanted the General Exclaim UHP, and then just repair and powder coat my "Ikari's". But for the same price or less, I found a set of Giovanni G817H with Lexani LX9100's. So since I also wanted a more flush look, as well as something less sporty looking, I picked them up. On to the pics (yeah, I know my car is really dirty, it rained outta no where).
Old rims and dead Falken's weigh in at 38.4 lbs each.
Picture not included in this copy
Picture not included in this copy
G-Line's with the 100% Lexani tires weigh in at 40.6 lbs each :(
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
😁
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Don't mind my legs and feet :p
Picture not included in this copy
Well, this is what happens when you're flush and don't have stretched tires:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Started smelling burning rubber within a mile of driving (total of 4 people in the car), and just drove for about 5 miles total (couldn't turn back right away). I had someone pull up next to me and tell me to roll down my window to say that one of my tires was smoking :(
I'll be taking out the rear hub spacers, and install them only for shows. I'll also be putting some rubber spring spacers in the rear.
Old rims and dead Falken's weigh in at 38.4 lbs each.
Picture not included in this copy
Picture not included in this copy
G-Line's with the 100% Lexani tires weigh in at 40.6 lbs each :(
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
😁
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Don't mind my legs and feet :p
Picture not included in this copy
Well, this is what happens when you're flush and don't have stretched tires:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Started smelling burning rubber within a mile of driving (total of 4 people in the car), and just drove for about 5 miles total (couldn't turn back right away). I had someone pull up next to me and tell me to roll down my window to say that one of my tires was smoking :(
I'll be taking out the rear hub spacers, and install them only for shows. I'll also be putting some rubber spring spacers in the rear.
.
Very nice Kao! as usually
These picture are my favorites:
Picture not included in this copy
and...
Picture not included in this copy
.
The rubber spring spacers works for me very good, let me know how it goes taking the spacer out, with my primitive tools I just can't take them out.
Looking good...
.
Very nice Kao! as usually
These picture are my favorites:
Picture not included in this copy
and...
Picture not included in this copy
.
The rubber spring spacers works for me very good, let me know how it goes taking the spacer out, with my primitive tools I just can't take them out.
Looking good...
.
I like the new rims too Kaotic! 👍 We somehow gotta connect for a sedan photo shoot. Maybe take part of a day and head up the road past the Foresthill bridge. There is a lake back there (past the town of Foresthill) and the road goes for quite a ways into the mountains. It would be a fun drive!
I'm really loving the rims Kaotic! what if you try the spring cushions again? might relieve some rubbing.
hey laz- consider cutting your rear fenders. i did and it gave me like 20 mm more clearance. pretty awesome
Hey AdeJong, im interested in how you did your fenders.. 20mm is plenty! I'm changing my rims soon as well, I might run into rubbing problems coz my new rims would be 8" wide.
Hope you can post some pix of your fender.
So you would recommend cutting over rolling fenders?
Hope you can post some pix of your fender.
So you would recommend cutting over rolling fenders?
Laz at least your's is just rubbing, I had slicing! so I had to remove my spacers for now...
Picture not included in this copy
Picture not included in this copy
Congratulations!!! I visit that site often... 🤘 the very first yaris sedan on "Iputinwork.com"Originally Posted by AdeJong 03 ↑got my car featured on the iputinwork site
Picture not included in this copy
I hope I get to be featured there one day... will be getting my Work Euroline DHs in a few weeks.
I like them wheels KL looks better
I'll be in Roseville this coming Thursday (22nd) for a few hours (don't want to drive back to Sac and then go back to Roseville after those few hours). I don't think my car will be clean since I'll be cleaning it on Friday for the NorCal meet. We can still do a photoshoot tho. 😉Originally Posted by Herbicidal ↑I like the new rims too Kaotic! 👍 We somehow gotta connect for a sedan photo shoot. Maybe take part of a day and head up the road past the Foresthill bridge. There is a lake back there (past the town of Foresthill) and the road goes for quite a ways into the mountains. It would be a fun drive!
However, since I'm there for dropping my gf off for a test, she said be ready to pick her up when she calls. hahaha. I'll let you decide on this.
Thanks. Taking out and putting in the hub spacers is pretty easy, especially if you are using the DIY guide here. But it's good to know that the rubber spring spacers works well.Originally Posted by derickveliz2 ↑.
Very nice Kao! as usually
These picture are my favorites:
Picture not included in this copy
and...
Picture not included in this copy
.
The rubber spring spacers works for me very good, let me know how it goes taking the spacer out, with my primitive tools I just can't take them out.
Looking good...
.
Yup, going to try out the rubber spacers again. heehe. Thanks.Originally Posted by jpadua ↑I'm really loving the rims Kaotic! what if you try the spring cushions again? might relieve some rubbing.
What did you use to cut the metal? And what about rusting on the exposed areas now? It's either cutting or rolling the fenders. hahaha.Originally Posted by AdeJong 03 ↑hey laz- consider cutting your rear fenders. i did and it gave me like 20 mm more clearance. pretty awesome
hahaha, mine is slicing and dicing as well as rubbing. hahahaha. I'm going to cut the fender liner at the front, and see what I can do about the rear.Originally Posted by jpadua ↑Laz at least your's is just rubbing, I had slicing! so I had to remove my spacers for now...
Picture not included in this copy
Thanks 😁Originally Posted by JumpmanYaris ↑I like them wheels KL looks better
That may not work for me since I'm at work until 4pm. Do you have any weekends that you'll be up in this area?Originally Posted by Kaotic Lazagna ↑I'll be in Roseville this coming Thursday (22nd) for a few hours (don't want to drive back to Sac and then go back to Roseville after those few hours). I don't think my car will be clean since I'll be cleaning it on Friday for the NorCal meet. We can still do a photoshoot tho. 😉
However, since I'm there for dropping my gf off for a test, she said be ready to pick her up when she calls. hahaha. I'll let you decide on this.
Ummm, I'll PM you when I'm back in Sac. After the NorCal meet, I'll be back at my mom's place in the Bay Area. However, once Sac State starts again, I'll be up there longer. hahaha.
i recently installed trd springs👍
1 attachment not included in this copy
Looks Great!!!
.
That's a scary sign! Nice photo effect in black!
That's a scary sign! Nice photo effect in black!
shammer them wheels are sick 2
I want them!
I think I am gonna start a wheels collection like my shoes lol
I want them!
I think I am gonna start a wheels collection like my shoes lol
note i repainted them... they suppose to be satin black, but i think its still shiny
Got some DIY on the LEDS?Originally Posted by viosnunza ↑daylight led
What are you doing with your old wheels?Originally Posted by Kaotic Lazagna ↑Okay, since I was a third way into the wear bar on two of my tires and half a mm away from the bars on the other two, I decided to get new tires. I wanted the General Exclaim UHP, and then just repair and powder coat my "Ikari's". But for the same price or less, I found a set of Giovanni G817H with Lexani LX9100's. So since I also wanted a more flush look, as well as something less sporty looking, I picked them up. On to the pics (yeah, I know my car is really dirty, it rained outta no where).
Old rims and dead Falken's weigh in at 38.4 lbs each.
Picture not included in this copy
Plans are to sell them off 😉Originally Posted by Pitt Yaris ↑What are you doing with your old wheels?
What's your price estimate?Originally Posted by Kaotic Lazagna ↑Plans are to sell them off 😉
Originally Posted by Pitt Yaris ↑What's your price estimate?
What ever is a fair price for them, $200 OBO????
OMFG. Srsly? If you do sell, how much w/shipping lolOriginally Posted by Kaotic Lazagna ↑What ever is a fair price for them, $200 OBO????
Any curbing or discrepancies?
I got them used, so they were pretty curbed already. That's the reason why I don't think I can get anything higher than $200 for them. I also have access for powdercoating for $50 for all four. I would have kept them and just repaired them, but I'm not sure if I want to put all the time and effort into it. hahaha.Originally Posted by TEHxFALLEN V1.2 ↑OMFG. Srsly? If you do sell, how much w/shipping lol
Any curbing or discrepancies?
They're nice rims, but the offset is only +40. Yeah, I guess spacers can solve that problem. hahahaha.
If you're okay with it, wanna see if you can quote me with how much it would cost to get it powercoated a dark goldish bronze + shipping to 91303? 🍻
And what size are they?
And what size are they?
They're 17x7. Powdercoating will be ~$50. However, they will have to be repaired and sanded prior to powdecoating. You might want to PM Clark (MiniTRD) to see if he has a source to do the labor. hahaha.Originally Posted by TEHxFALLEN V1.2 ↑If you're okay with it, wanna see if you can quote me with how much it would cost to get it powercoated a dark goldish bronze + shipping to 91303? 🍻
And what size are they?
As for shipping, I entered a box dimension of 23"x8"x23" with a weight of 38.4lbs and got this:
Express Mail® [More info about Express Mail®]
Tue, Jul 20 by 3 PM $152.10
Express Mail® Hold For Pickup [More info about Express Mail® Hold For Pickup]
Tue, Jul 20 by 3 PM $152.10
Priority Mail® [More info about Priority Mail®]
2 days $38.30
Parcel Post® [More info about Parcel Post®]
5 days $22.03
That's per rim, so all four would be at least $150 for shipping, and that's if I can find a box with those dimensions.
If someone can show/tell me how to dismount the tires, I'm sure shipping will be far less as the 912's weigh in around 22 lbs or something like that from what I remember.
I subtracted just 20 lbs to be safe, and this is what I got:
Express Mail® [More info about Express Mail®]
Tue, Jul 20 by 3 PM $83.50
Express Mail® Hold For Pickup [More info about Express Mail® Hold For Pickup]
Tue, Jul 20 by 3 PM $83.50
Priority Mail® [More info about Priority Mail®]
2 days $25.95
Parcel Post® [More info about Parcel Post®]
5 days $15.30
I subtracted just 20 lbs to be safe, and this is what I got:
Express Mail® [More info about Express Mail®]
Tue, Jul 20 by 3 PM $83.50
Express Mail® Hold For Pickup [More info about Express Mail® Hold For Pickup]
Tue, Jul 20 by 3 PM $83.50
Priority Mail® [More info about Priority Mail®]
2 days $25.95
Parcel Post® [More info about Parcel Post®]
5 days $15.30
My new-er (used) 2009 Sedan in Polar White...minimal yet economical and reliable :-). Up Yaris.
1 attachment not included in this copy
2007 sedan. black sand pearl.
1 attachment not included in this copy
Ohhhh so thats ur car!
I seen it!
(SSYaris07)
I seen it!
(SSYaris07)
heh. wanna trade? :P
I'll stick to mine lol
You can make urs look like that
When are you lowering it?
You can make urs look like that
When are you lowering it?
I had a bodykit but I took it off
1 attachment not included in this copy
lowering!! lol, that's way down the line for me....after a few more things (NST SSK cable bushings, new SRI, braille battery, oil catch can, maybe some MI rad hoses, etc.)... i like the cheap stuff. lol.
Here a short video clip of our meet last saturday.
http://www.youtube.com/watch?v=NzbbS...layer_embedded
http://www.youtube.com/watch?v=NzbbS...layer_embedded
just some new photos of my vios
Picture not included in this copy
Picture not included in this copy
Some nice looking sedans there!
Cool vod JPOriginally Posted by jpadua ↑Here a short video clip of our meet last saturday.
http://www.youtube.com/watch?v=NzbbS...layer_embedded
Hey I'm new here. Love the forum.
Here is a quick pick of my ride.
Here is a quick pick of my ride.
1 attachment not included in this copy