Yarisworld Archive

[DIY] To remove logotipos of the mark

7 posts 路 6,299 views

S茅rgio BarrosOriginal postPortugal 路 Aug 22, 2006#1
It gave to me in the head to remove the logotipos of the back of the Yaris. Something that already walked some time to make.
It delayed only 10 minutes.
With a drier it is heated well soon to remove, later leaves with jeitinho not to scratch out the painting (I used a penknife). After removing soon, the remaining portion of the autocolante ribbon leaves that to be in the plate. If to cost to remove the autocolante ribbon heats with the drier that leaves easily.
To use a desengurante to remove the remaining glue.
E already is. 馃憤

Picture lost 路 img232.imageshack.us

Picture lost 路 img481.imageshack.us

Picture lost 路 img364.imageshack.us

Picture lost 路 img523.imageshack.us

Replies 6

KatanaUnder the hood! 路 Aug 22, 2006#2
Well the hard thing is to remove badges from the new one, cause they are placed in a hole on the chassis.
S茅rgio BarrosThread starterPortugal 路 Aug 22, 2006#3
They are not glue? It seems me that the Yaris word is equal to mine.
S茅rgio BarrosThread starterPortugal 路 Aug 22, 2006#5
It seemed well me. The logos are equal.
KatanaUnder the hood! 路 Aug 22, 2006#6
Yeap they are glued, but the leave an empty place if removed...

@chris tnx for the link.
abdiel hiramPanama 路 Feb 23, 2007#7
I removed mines just today... To be honest, I like a lot the way it looks now.....