Yarisworld Archive

My 6500k H4 HID Review [pics]

73 posts · 23,891 views · page 1 of 2

Chris07LBOriginal postNew Jersey · Aug 8, 2006#1
FYI - THESE HAVE BEEN REPLACED BY AN EAGLEYE KIT! *** THE LAST FEW PAGES ARE ALL IN REFERENCE TO THE NEWER KIT! *** THIS NEXUN IS NO LONGER BEING SOLD/PUSHED BY ME!

Well over the weeks, lots have asked about what HIDs I am using, and after ample testing for my friend that's the supplier, here goes my review. 😎

Please READ, as many questions can be answered below in my review.

Now, the H4 HID kit I am using, is a single H4 kit. Meaning it is ONLY a low beam kit. For those needing a high beam to pass inspection, but rather a single HID kit, no problem. By disconnecting ONE wire harness plug, and removing the HID bulb, you can swap your stock halogen bulb in, reconnect the original plug side, and pass inspection. A simple 5 minute fix for when needed. I never flash my High beams, so for me, a single only kit wasn't an issue.

For those wanting both a High & Low beam, and not wanting to be bothered with the mentioned above, fear not! My buddy has H4 High/Low HID kits, but as with anything additional, so is the price. Install is exactly the same, only difference is a tiny super bright halogen bulb thats attached to the H4 housing... it sits just above the HID itself.

My kit is made by Nuxen, and to describe the color, I would have to say bright white, with just a HINT of purple in the mix. The color is listed as a 6500k, but it is more like a true 6000k with the extra hint of the purple.

Keep in mind, beam Cut Off is VERY important with an aftermarket HID kit, in a non-factory HID headlight housing! This will keep you from blinding other drivers, and help you put the light where its needed most... not splattered all over the highway!

My kit in the pictures has a special low price being run right now, PM me on PRICING. 🙂

Keep in mind, unlike all the cheesy HID kits you see listed on eBay, these H4 kits come with a ONE YEAR Warrenty, and all weather proof connections are plug & play, to avoid any confusion during install. It is a very easy install.

*NOTE*, those with Day Time Running Lights, will first have to Disable them! Follow the link - - DISABLED DayTime Running Lights How To- 2007 Yaris! -

On to the pictures.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

2 attachments not included in this copy

Replies 72

Kr0n1kRochester, NY · Aug 8, 2006#2
As I've said before, that looks frikkin sweet. Will the high/low beam kit be an easy install as well?
OxyG3nEMontreal , Quebec , Canada · Aug 8, 2006#3
ill buy one soon... only thing its illegal here huhu
Chris07LBThread starterNew Jersey · Aug 8, 2006#4
Originally Posted by Kr0n1k
As I've said before, that looks frikkin sweet. Will the high/low beam kit be an easy install as well?
Opps, good question. I just added the info in the post. 🙂
Chaad32USA · Aug 8, 2006#5
Hmmmm....i think my headlights are just fine for me.
Kr0n1kRochester, NY · Aug 8, 2006#6
Nice Chris, thanks for the info. If only the damn thing would hurry up and get off the boat.
ChinoCharlesOH · Aug 8, 2006#7
👍 👍 SOOO CLASSY HAHAHA

I want some.
TRD_YarisAustin, Texas · Aug 8, 2006#8
what type of bulb do you have in the LICENSE PLATE ILLUMINATOR?? that thing is bright and has NEARLY as good of a cutoff as your HIDs 😉
Chris07LBThread starterNew Jersey · Aug 9, 2006#9
Originally Posted by TRD_Yaris
what type of bulb do you have in the LICENSE PLATE ILLUMINATOR?? that thing is bright and has NEARLY as good of a cutoff as your HIDs 😉
Oooooooh, you like? 😉
JfoofooNew Jersey · Sep 11, 2006#10
Looks Sweet Chris... send you an e mail to purchase the dual Kit...
07yaris_feCanada · Sep 16, 2006#11
Nice.......

Picture not included in this copy
IsLNdbOiLas Vegas, NV · Sep 17, 2006#12
Chris07LB, you have a PM.
ScottFernChicago, IL · Sep 17, 2006#13
You have PM.
Chris07LBThread starterNew Jersey · Sep 17, 2006#14
Both PM's replied to fella's. 👍
ItsMyDailyLos Angeles, CA · Sep 20, 2006#15
sent you a pm regarding this kit.
IsLNdbOiLas Vegas, NV · Sep 20, 2006#16
Sent you another PM as well.
Chris07LBThread starterNew Jersey · Sep 20, 2006#17
Originally Posted by IsLNdbOi
Sent you another PM as well.
Nothing in my inbox from either of you. 😕
ItsMyDailyLos Angeles, CA · Sep 20, 2006#18
that's strange. I went ahead and sent you another one.
IsLNdbOiLas Vegas, NV · Sep 20, 2006#19
Sent you the PM again.
ItsMyDailyLos Angeles, CA · Sep 22, 2006#20
sent you another pm, hopfully it reaches you :)
IsLNdbOiLas Vegas, NV · Sep 23, 2006#21
You've got another PM. I think I'm going to jump in and finally order one through you Chris07LB.
ItsMyDailyLos Angeles, CA · Sep 23, 2006#22
I'm waiting on the reply, and I'll send my money in once I get one. However the delay in replys to my pm's is making me hesitate. Hopefully communication gets better, but he's probably a busy guy.
IsLNdbOiLas Vegas, NV · Sep 23, 2006#23
How much are replacment lights for these HIDs if one ever goes out? Would the warranty take care of that? Last question, if I ever have to claim the warranty who do I go through?
Chris07LBThread starterNew Jersey · Sep 23, 2006#24
Please understand, I am not the manufacturer of the HIDs, just helping my friends company based out of California when I can.. nor do I spend every waking minute checking my PM's. I have typed novels to tons of guys including every tidbit of information I can, only to never hear back (no big deal) or be asked the same questions over and over (again, no big deal).. But gimmie a brake, if you dont hear back 5 minutes after you Pm'd.

I'll get to all my PM's AGAIN, by tonight. Thanks.
vodkalushRochester, NY · Sep 23, 2006#25
you seem to have a buttload of PM's.... so i figured I'd send u one as well, lol.*



but reall.
Chris07LBThread starterNew Jersey · Sep 23, 2006#26
Originally Posted by vodkalush
you seem to have a buttload of PM's.... so i figured I'd send u one as well, lol.*



but reall.
Aw, thanks buddy.. Ill answer yours right now. 😁
vodkalushRochester, NY · Sep 23, 2006#27
Originally Posted by Chris07LB
Aw, thanks buddy.. Ill answer yours right now. 😁
haha, and i thanks you. have a great day buddy.👍
Centurion2200Panama · Sep 24, 2006#28
I have 6500k in my new yaris too ;)..they're excelente..... pics below...


Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
ChinoCharlesOH · Sep 24, 2006#29
Do you have HID's in the parking lights too?!
Centurion2200Panama · Sep 24, 2006#30
no just the headlights....

in the parking lights i have leds....

in the taillights i have xenon bulbs on the turn signals....
vodkalushRochester, NY · Sep 24, 2006#31
Originally Posted by Centurion2200
no just the headlights....

in the parking lights i have leds....

in the taillights i have xenon bulbs on the turn signals....
brand/part #'s **??
IsLNdbOiLas Vegas, NV · Sep 25, 2006#32
How does the high / low beam kit work? Don' you need bi-xenon projectors to do high / low beam HID?
Chris07LBThread starterNew Jersey · Sep 25, 2006#33
Originally Posted by IsLNdbOi
How does the high / low beam kit work? Don' you need bi-xenon projectors to do high / low beam HID?
In the kits I help sell now, the high beam works exactly the same as the Toyota Pirius that are equipted with factory HIDs. Instead of having a tiny halogen bulb attached to the low beam HID bulb like other kits, there is only one HID bulb, but the housing itself "snaps" back to aim the light patten up (high beam).
IsLNdbOiLas Vegas, NV · Sep 26, 2006#34
Does the hi beam / low beam kit use debased bulbs that are hard to get replacements for?

Finally, if the hi beam / low beam kit does use debased bulbs, is there any way to get ones that are between 4300 - 5000k?

4300 to 5000k bulbs are supposedly the best types to use when using stock reflectors instead of using projectors.
Chris07LBThread starterNew Jersey · Sep 27, 2006#35
Originally Posted by IsLNdbOi
Does the hi beam / low beam kit use debased bulbs that are hard to get replacements for?

Finally, if the hi beam / low beam kit does use debased bulbs, is there any way to get ones that are between 4300 - 5000k?

4300 to 5000k bulbs are supposedly the best types to use when using stock reflectors instead of using projectors.

Debased bulbs? 😕 🤷
IsLNdbOiLas Vegas, NV · Sep 27, 2006#36
I meant rebased bulbs.
ChinoCharlesOH · Sep 27, 2006#37
Originally Posted by Chris07LB
In the kits I help sell now, the high beam works exactly the same as the Toyota Pirius that are equipted with factory HIDs. Instead of having a tiny halogen bulb attached to the low beam HID bulb like other kits, there is only one HID bulb, but the housing itself "snaps" back to aim the light patten up (high beam).
For me, this reads "There is no point in getting an HID kit with high beams." What do you think Chris, do you ever get into a situation where you wish you had the high beams?

Another question... assuming you got a low beam only kit would it be possible to change the stick controls so that a tug backwards turned on your fog lights instead of your high beams? This way you wouldn't need to install the switch for the fogs and all light controls could be operated with the stick. That would be quite the clean install.
Chris07LBThread starterNew Jersey · Sep 27, 2006#38
Originally Posted by ChinoCharles
For me, this reads "There is no point in getting an HID kit with high beams." What do you think Chris, do you ever get into a situation where you wish you had the high beams?

Another question... assuming you got a low beam only kit would it be possible to change the stick controls so that a tug backwards turned on your fog lights instead of your high beams? This way you wouldn't need to install the switch for the fogs and all light controls could be operated with the stick. That would be quite the clean install.
Being how bright these low beam low H4 HID kit is, I have never needed to need anything brighter. As long as your headlights are aimed correctly, you will see great, and not be any harm or distraction to other drivers.

Now do I wish I sometimes had high beams for the A-Holes that cut me off from time to time, YES! 😆
Chris07LBThread starterNew Jersey · Sep 27, 2006#39
Originally Posted by IsLNdbOi
I meant rebased bulbs.
Again, these kits are H4 fittment, exactly what comes original equiptment size in your Yaris.

There is not "adapters" to make them from one size, to another.

To answer your last question, I believe he has a few different K ratings to choose from, but comparing light output to headlights with or without projectors, is like comparing apples to oranges.

A projector retrofit with HIDs, is hands down the best way to go, if you know what your doing to make it work correctly.
IsLNdbOiLas Vegas, NV · Sep 27, 2006#40
I've been asking around HIDPlanet for some advice and they told me that if I'm gonna be doing a drop in kit and be keeping my stock reflectors then the best k rating to use are between 4000 to 5000 k bulbs.


Originally Posted by Chris07LB
Again, these kits are H4 fittment, exactly what comes original equiptment size in your Yaris.

There is not "adapters" to make them from one size, to another.

To answer your last question, I believe he has a few different K ratings to choose from, but comparing light output to headlights with or without projectors, is like comparing apples to oranges.

A projector retrofit with HIDs, is hands down the best way to go, if you know what your doing to make it work correctly.
Chris07LBThread starterNew Jersey · Sep 27, 2006#41
Originally Posted by IsLNdbOi
I've been asking around HIDPlanet for some advice and they told me that if I'm gonna be doing a drop in kit and be keeping my stock reflectors then the best k rating to use are between 4000 to 5000 k bulbs.
Thats correct. Most "useable" light.. Just about every car company that has HID/Xenon's as factory equiptment, uses bulbs in that K range.

From experience, 8oook and 1o,oook may look nice, but you cant see the road for chit! These bulbs in this original post of mine, and the ones I am currenty using/selling, are labled I think higher then they should be... this is a nice crisp bright white with what I have now. No where near the bluish/teal color like the higher K bulbs.

1 attachment not included in this copy

IsLNdbOiLas Vegas, NV · Sep 27, 2006#42
Originally Posted by Chris07LB
Thats correct. Most "useable" light.. Just about every car company that has HID/Xenon's as factory equiptment, uses bulbs in that K range.

From experience, 8oook and 1o,oook may look nice, but you cant see the road for chit! These bulbs in this original post of mine, and the ones I am currenty using/selling, are labled I think higher then they should be... this is a nice crisp bright white with what I have now. No where near the bluish/teal color like the higher K bulbs.
Excellent. Now I have to decide whether I want to get fog lights or your HID kit first. 😛
Chris07LBThread starterNew Jersey · Sep 27, 2006#43
Originally Posted by IsLNdbOi
Excellent. Now I have to decide whether I want to get fog lights or your HID kit first. 😛
Id go fog lights. The eBay one's, like Todd's are only $119 shipped with everything.... save up later for two HID kits, one for fogs, one for headlights. 😉
ItsMyDailyLos Angeles, CA · Sep 27, 2006#44
Does this low beam kit eliminate the ability to use the high beams on the yaris?

Also any chance you can pm me the number of your contact? I'd like to speak to him about the purchase. There's a chance I may be heading up north in a couple weeks so maybe I can stop by after all.
IsLNdbOiLas Vegas, NV · Sep 27, 2006#45
The Yaris uses a single bulb for low beam and high beam so if you got the low beam kit, you'd have low beam only. At least that's what I got from all of this.
IsLNdbOiLas Vegas, NV · Sep 27, 2006#46
Originally Posted by Chris07LB
Id go fog lights. The eBay one's, like Todd's are only $119 shipped with everything.... save up later for two HID kits, one for fogs, one for headlights. 😉
That's a good idea. Thanks for the advice. 😉
ItsMyDailyLos Angeles, CA · Sep 28, 2006#47
Originally Posted by IsLNdbOi
The Yaris uses a single bulb for low beam and high beam so if you got the low beam kit, you'd have low beam only. At least that's what I got from all of this.
interesting. well then I guess I'd like to purchase the high/low beam kit.
Chris07LBThread starterNew Jersey · Sep 28, 2006#48
Originally Posted by Violin
As mentioned before, the new kits are EAGLE EYE. This post does not seem to be ending, so all the new guys replying, again, the new kits are EAGLE EYE, not Nuxen.

We have had much better results with the color between the two lights staying the same.. the Nuxen had a few issues over time in that respect.
Also the Eagle Eyes have the igniter built in, so its a much easier/cleaner install as well.

Service and communication with Eagle Eye company has also been leaps and bounds over Nuxen.
ViolinNew Jersey · Sep 28, 2006#49
From your first post on this thread:
Originally Posted by Chris07LB
My kit is made by Nuxen...
Thanks for clearing that up.

Actually, shouldn't that be "EAGLEYE"?
ViolinNew Jersey · Sep 28, 2006#50
Do you know if the High/Low is kit plug & play as well or does it require any cutting of the housing?

This is what has me concerned: (see step #1): http://www.namyung.co.kr/english/hotproduct/hidh4.asp

It may just be drilling a small hole for a mounting screw.