Yarisworld Archive

My 6500k H4 HID Review [pics]

73 posts · 23,891 views · page 2 of 2

Replies continued

nick1983Winnipeg Manitoba · Sep 28, 2006#53
Would you be able to get the high/low?
ViolinNew Jersey · Sep 28, 2006#54
Originally Posted by nick1983
Would you be able to get the high/low?
I can answer that - Yes.

I'm probably going to get a set myself. I'll share my impression of them here if I do.
Chris07LBThread starterNew Jersey · Sep 28, 2006#55
High/Low's require NO MODDING/CUTTING Etc. of your housing..

Difference between the single low beam, and high/low beam H4 kits, is the high/low base of the bulb is extended (longer) then the single.

This, again, is like the HID/xenon used on the Toyota Prius. When engaging the high beams, the actual bulb itself, "snaps" back and up, to project the light "up wards."

I need to gather up all my post reply's, as Im repeating myself over and over.. 😁
IsLNdbOiLas Vegas, NV · Sep 28, 2006#56
Go to this site to see more about the kit Chris is selling:


http://plasmagarage.com/



You'll see pics. of the ballasts, harnesses and the high / low beam HID bulb used in the kit. Also, their price for the kit that does high / low beam is $328.75 shipped via 2 day UPS.

I'll probably buy the kit from them and then replace the ballast that the kit comes with, with some Denso ballasts that Toyota uses in their other cars.




Chris, sam07 said this:

"I am happy with the results and during the process of my HID retro I noticed at the bottom of the headlights there is a square space with screw holes into it. I noticed that this resembles an HID ballast location for our headlights *OEM fitment* as well as the D4R classification implanted in the back of the headlight*hid bulb* also."

Did you notice these square spaces for the ballasts in your LB?
Chris07LBThread starterNew Jersey · Sep 28, 2006#57
PM me for lower prices then that site.

Here's how the high/low kit looks.. notice the difference in bulb base, compared to the single H4 bulbs.

http://plasmagarage.com/H4BiXenonIns...otaTacoma.html

Be sure to play their quick video to see them in action!
FoEKuZSan Clemente, CA · Sep 28, 2006#58
Originally Posted by Chris07LB

Be sure to play their quick video to see them in action!

that video doesnt happen to belong to you does it?? 🙄
ViolinNew Jersey · Sep 29, 2006#59
The video shows the hi/lows. He has just the lows.
Chris07LBThread starterNew Jersey · Sep 29, 2006#60
Originally Posted by FoEKuZ
that video doesnt happen to belong to you does it?? 🙄
Again, that site is NOT where you would be getting your kits from, nor would the price be that expensive!
FoEKuZSan Clemente, CA · Sep 29, 2006#61
Originally Posted by Violin
The video shows the hi/lows. He has just the lows.

got ya...well, i installed my lights this afternoon, im just waiting till it gets dark here in cali, so i can take some pics...
FoEKuZSan Clemente, CA · Oct 1, 2006#62
not much of anything....but at least i took the picture....

1 attachment not included in this copy

ViolinNew Jersey · Oct 1, 2006#63
I'm thinking of getting the 5200k intead of the 6000k or the 7000k he has in stock.

Am I right that the light will be better focused and less likely to attract unwanted attention from the cops?
IsLNdbOiLas Vegas, NV · Oct 2, 2006#64
The higher the k rating 6000+, the bluer to more purple the light becomes. That would attract cops. I'd get something between 4000 - 5000k.
ViolinNew Jersey · Oct 2, 2006#65
Thanks.
ItsMyDailyLos Angeles, CA · Oct 2, 2006#66
most factory cars come equipt with 4000K. Besides the higher you go is more for looks then actually visibility. Yes it'll still be bright, but the distance of the beam will be shortened.
ecoAtlanta · Oct 7, 2006#67
Ok,I have 2 questions for you Chris,so there is no modding or cutting or drilling what so ever,right,let me know what is required if Im wrong,and where did you place the ballast,do I need to do some drilling to place the ballast.
Chris07LBThread starterNew Jersey · Oct 7, 2006#68
Originally Posted by eco
Ok,I have 2 questions for you Chris,so there is no modding or cutting or drilling what so ever,right,let me know what is required if Im wrong,and where did you place the ballast,do I need to do some drilling to place the ballast.
With the kit I am running there is NO modding, cutting, splicing, drilling to any Toyota or HID part needed what-so-ever. 🙂

As for the ballasts, being as the igniters are built in, you have only one simple box to mount, and thats it! I will have to snap off a few pics, and update this post with their locations under the hood. 👍
ecoAtlanta · Oct 8, 2006#69
Ok,a few more questions before I buy,the new set are the Eagleye's,can you say the same about them,no modding or splicing,and with your set,I understand that you have no high beam,so when you switch to the high beam position,what happens,do your lights go out,and is the set you run still available,I am more then likly going to buy the Eagleye's with high/low from you,if no modding required,please let me know.And I would love to see where/how you placed the ballast.
ecoAtlanta · Oct 9, 2006#70
Chris would like those answered before I buy,I know your busy,but Im impatient.
Chris07LBThread starterNew Jersey · Oct 10, 2006#71
I think I need to put everyone in touch DIRECT with my buddys company that sells them. I answer LOTS of PM's and questions on my FREE time each day for people expecting an answer ASAP..

All questions Pm'd or in this post that have not been addressed yet, will be tomorrow.
IsLNdbOiLas Vegas, NV · Oct 10, 2006#72
Again, instead of dealing with a private individual (and possibly not getting any support or warranty), buy it from this store:

http://plasmagarage.com/


It's the same Eagleye kit Chris has on sale. The kits from there cost less WITH the shipping included.
Chris07LBThread starterNew Jersey · Oct 10, 2006#73
This post needs a little refreshing, as its been polluted lately with FLASE information passed on, then passed on again.

1) I am not the store selling these HIDs, I am only helping to show the H4 fittment in MY Yaris, and all kits would be DIRECT thru my buddy's company in California. People who were SERIOUS and aksed to buy, have been given his direct line at the company and his email address as well.

2) As also mentioned, each kit comes with a one year warranty, and its from a company with great customer service.

3) The H4 kit in the link YOU posted, is NOT an Eagleye kit! There is no small Halogen bulb used for the high beams. Unless they are selling old stock, the latest Eagleye kits I've had in my hands is one complete unit just like the Toyota Prius uses.

The low beam only kits I am talking about are $230 SHIPPED, and the high/lows are $330 shipped.

This thread needs to close, and I will start a completely new one with all the info that has been asked, since this original, non-EagleEye kit, was posted.

FIRST PICTURE is NOT an Eagleye H4 High/Low bulb as shown on the "plasmagarage" site.

SECOND PICTURE IS the Eagleye H4 HIgh/Low!

2 attachments not included in this copy