dbaxterOriginal postAtlanta, GA · Aug 6, 2006#1Painted the valve cover to match the car
PreSol, sand it down ( below before pic ) for a nice surface for the paint to stick to, presol again, and paint.
Letting it dry now and putting on second coat in about 30 minutes.
Before and after, still have to remove the paint from the logo and vvti once I have the second coat on.
Actually 2nd Mod, but removing ugly plastic hub caps was the first, they just had to go until I get real rims.
2 attachments not included in this copy
Replies 48
pennystocksChicago, IL · Aug 6, 2006#2Looks nice, hope you used engine block paint. ;)
Auh, why would you take the hub caps off. Cars look so bad without em on black steel.
It looks like you bought rims, somebody stole em and your driving on 4 spare tires.
Black steel should be left to 1992 civics only.
dbaxterThread starterAtlanta, GA · Aug 6, 2006#3Back installed. Looks a little orange instead of red, looked really red inside. Giving it some time to dry :D
Also trying out the Red Braiding, now thats a PIA to keep from unraveling :S
1 attachment not included in this copy
dbaxterThread starterAtlanta, GA · Aug 6, 2006#4 Originally Posted by pennystocks
Looks nice, hope you used engine block paint. ;)
Auh, why would you take the hub caps off. Cars look so bad without em on black steel.
It looks like you bought rims, somebody stole em and your driving on 4 spare tires.
Black steel should be left to 1992 civics only.
Yah its Red Engine paint. I have never liked hub caps, and although yah they have the spare tire look, from a distance they look better. Besides it the theme I am going with Red and Black.
WOW is the focus bad on my camera, think my kids dropped it one to many times.
mikeukrainetzCanada · Aug 6, 2006#5I painted mine along time ago too, blue to match. Looks nice, looked better when it was done. I dont spend enough time cleaning the engine bay. I used an etching primer, blue and then clear... what steps did you take? how many coats of each and what brand?
BTW, did you pop out the rubber grommets? they slide out very easy.
rstb88Tennessee · Aug 6, 2006#6I want to do that but I don't know how to mask off the vvti and toyota, cause i want them to match the paint(original colour matches enough for now). I'm gonna match the colour to the blue sewn into the seats and doors. Gonna keep a stock theme. I've considered painting the exterior of the intake, minus the flanges, but not sure if I want THAT much blue.
dbaxterThread starterAtlanta, GA · Aug 6, 2006#7Steps are above, so far just two coats.
Used Dupont Red Engine Paint, The Toyota and VVTI I will just use some paint remover on them and they will be just fine.
This was my first shot anyway, going to try and find something closer to the actual car color, but it still looks better then stock. Once the engine cools down a little more I will drain off the radiator, and put the red braiding on, should look pretty good, that matches really well.
MacMaster761Natick, MA · Aug 6, 2006#8yeah guys, if you're gonna do this mod, do it correctly the first time...
you dont want it to end up like this...
dont worry this was from the old scion - it got replaced by the cf engine cover...
Picture not included in this copy
dbaxterThread starterAtlanta, GA · Aug 6, 2006#9This one I taped off so paint did not get into the IAT sensor and maf tube.
After working on a v8 LS1, this engine is so tiny. Its cute
2 attachments not included in this copy
mikeukrainetzCanada · Aug 6, 2006#10That looks sweet.
BooMadison, WI · Aug 6, 2006#11Looks great 👍 .. I can't wait to have mine painted... However mine won't be here until end of Aug.🙁
07WYarisRSRidgeway Ontario · Aug 7, 2006#12 Originally Posted by rstb88
I want to do that but I don't know how to mask off the vvti and toyota, cause i want them to match the paint(original colour matches enough for now). I'm gonna match the colour to the blue sewn into the seats and doors. Gonna keep a stock theme. I've considered painting the exterior of the intake, minus the flanges, but not sure if I want THAT much blue.
Just take masking tape and tape over the lettering and emblem. then using a razor blade or sharp exacto/utility knife blade, trim the tape around the edges of the lettering.
Very simple.
I did my intake on the truck the same way.
Picture not included in this copy 07WYarisRSRidgeway Ontario · Aug 7, 2006#13 Originally Posted by dbaxter
Painted the valve cover to match the car
PreSol, sand it down ( below before pic ) for a nice surface for the paint to stick to, presol again, and paint.
Letting it dry now and putting on second coat in about 30 minutes.
Before and after, still have to remove the paint from the logo and vvti once I have the second coat on.
Actually 2nd Mod, but removing ugly plastic hub caps was the first, they just had to go until I get real rims.
Sorry but IMO it looks like crap.
you should have at least taped over the lettering and emblem or repainted it black after or something...
If you want tit to look 100x better use a sanding block and sand the lettering and emblem down so the black plastic shows through. start out with about 800 grit and finish with 1000 for smooth finish.
KatanaUnder the hood! · Aug 7, 2006#14Νice work there guys!!!
Do you think that I should do it too?My car is black so I dont know if it's gonna make any difference.
dbaxterThread starterAtlanta, GA · Aug 7, 2006#15 Originally Posted by 07WYarisRS
Sorry but IMO it looks like crap.
you should have at least taped over the lettering and emblem or repainted it black after or something...
If you want tit to look 100x better use a sanding block and sand the lettering and emblem down so the black plastic shows through. start out with about 800 grit and finish with 1000 for smooth finish.
So tell me how you really feel. I didn't want to tape it I wanted to do it MY WAY. I still have to do several more coats.
RTF Thread, I said I was going to be using Paint Remover already on the lettering/logo. I just dropped it in to see how it looked.
dbaxterThread starterAtlanta, GA · Aug 7, 2006#16 Originally Posted by Katana
Νice work there guys!!!
Do you think that I should do it too?My car is black so I dont know if it's gonna make any difference.
In that case you need to chose to either chrome the engine bay or chose a complementary color. yellow, red, blue, chrome etc...
KatanaUnder the hood! · Aug 7, 2006#17Τhanks for the answer.
What colour do you advise me to paint it?
MacMaster761Natick, MA · Aug 7, 2006#18yo man, make up your own mind... black will go with pretty much everything, whats your second favorite color - paint it that. Then buy that color lights and put the lights in your car. Then get underbody lights... then start rocking the carbon fiber - shit this is exactly what happpened to my scion (way to carried away). 😎
KatanaUnder the hood! · Aug 7, 2006#19Hey there.Thanks for the answer.Maybe Red is the colour for me!
ChinoCharlesOH · Aug 7, 2006#20Ewww underbody lights... haha.
Cool idea about painting the cover... the possibilities here are only limited by how patient of a masker you are. Is there some kind of sealer/primer combo you can use that would enable you to paint the cover with car paint? I wouldnt mind a meteorite metallic cover.
Chaad32USA · Aug 7, 2006#21Flames would be nice!!
Chaad32USA · Aug 7, 2006#22This is what I had done on my Nissan Tatan, just thought you all would like to see.
😈 😈 😈 😈 😈 😈 😈 😈 😈 😈 😈 😈
3 attachments not included in this copy
dbaxterThread starterAtlanta, GA · Aug 7, 2006#23very sharp
rstb88Tennessee · Aug 7, 2006#24I bought engine enamel and sandpaper to san dit down. Do I have to use primer, cause I couldn't find any high temp primer.
mikeukrainetzCanada · Aug 7, 2006#25Try to find some VHT products, they do a ton of engine enamels and have been around for years.
KatanaUnder the hood! · Aug 8, 2006#26Μy friend Chaad32 we need a guide for that!Excellent!!!
johnnyfiveMilwaukee WI · Aug 8, 2006#27the guide would read "find someone that is good with an air brush" :)
AlexKSparks, NV, USA · Aug 8, 2006#28I'm thinking of doing something like this, although I want to paint the underside of my pistons. I'm also thinking of painting a miniature version of the Last Supper on the inside of my catalytic converter. The guy at Jiffy Lube is really going to appreciate all my hard work.
Seriously people, this is ridiculous.
ChinoCharlesOH · Aug 8, 2006#29Wow dude, that sounds expensive. You must be rich! 🙄
KatanaUnder the hood! · Aug 8, 2006#30Yes!Ha it seems that you love enhancing the look of your car!
TRD_YarisAustin, Texas · Aug 8, 2006#31 Originally Posted by AlexK
I'm thinking of doing something like this, although I want to paint the underside of my pistons. I'm also thinking of painting a miniature version of the Last Supper on the inside of my catalytic converter. The guy at Jiffy Lube is really going to appreciate all my hard work.
word. Make sure to post up pictures when you're done 👍
I like the flames on the truck valve cover 👍
VHT makes GREAT paint for engine compartments. Whatever you do, just make sure to take your time and DO IT RIGHT. If not, it will look FUGLY!!
Chaad32USA · Aug 8, 2006#32Actually a good friend did that......and the post earlier that stated all you need is a good airbrush is right.
KatanaUnder the hood! · Aug 9, 2006#33Guys how come you know so much?Excellent ideas and results.
Chris07LBNew Jersey · Aug 9, 2006#34 Originally Posted by Chaad32
This is what I had done on my Nissan Tatan, just thought you all would like to see.
😈 😈 😈 😈 😈 😈 😈 😈 😈 😈 😈 😈
Now tell me... this WHOLE time, you aren't BaseBallFans over on TitanTalk! Tell me!! 🙄
dbaxterThread starterAtlanta, GA · Aug 9, 2006#35Airbox and Intake done, even with leaving the logo and lettering along ( which I personally like ) it looks at least better then stock. ( again my opinion )
Going to see if I can find the exact match to the cars exterior color and redo, but for now I like it
1 attachment not included in this copy
Kr0n1kRochester, NY · Aug 9, 2006#36Very nice. Now you need a polished TRD oil cap to really set off the valve cover.
Chaad32USA · Aug 9, 2006#37No I'm not Baseballfanz.....those are his pics though. Mine looked Identical due to the fact that I took the pictures to my friend to aribrush. Unfortunately I didn't take pics, so I used his. Thats why I put "I had this done" rather that this was mine.
Chaad32USA · Aug 9, 2006#38 Originally Posted by Chris07LB
Now tell me... this WHOLE time, you aren't BaseBallFans over on TitanTalk! Tell me!! 🙄
I was chaad32 over there too. That is what I traded in for my Yaris.
P.S. look at post above
Chris07LBNew Jersey · Aug 10, 2006#39 Originally Posted by Chaad32
I was chaad32 over there too. That is what I traded in for my Yaris.
P.S. look at post above
Two posts needed to explain? 😆
BTW, his was done by a girl that posts by ChicksDigEmToo.. Did she do yours?
Chaad32USA · Aug 10, 2006#40No...my friend Troy that lives in VA Beach did mine.
rstb88Tennessee · Aug 10, 2006#41I didn't see the answer to my question... is primer neccessary?
dbaxterThread starterAtlanta, GA · Aug 11, 2006#42It wouldn't hurt. Always help the paint stick to whatever surface, but make sure you prep the airbox and/or valvecover first by sanding lightly to scuff it up so the surface isnt super smooth. Then use some presol to clean off all oils and dirt from the surface, then paint/primer.
rstb88Tennessee · Aug 11, 2006#43do i need a high temp primer cause I couldn't find one?
Chris07LBNew Jersey · Aug 11, 2006#44 Originally Posted by rstb88
do i need a high temp primer cause I couldn't find one?
Get yourself BULLDOG Primer Adhesion Promoter. Its the best for plastic's, fiberglass, viynal, and even metal.
marcustoronto, canada · May 3, 2007#45ANYONE GRAB A FIRE DISTINGUISHER!!!!😈
Originally Posted by
Chaad32 ↑ This is what I had done on my Nissan Tatan, just thought you all would like to see.
😈 😈 😈 😈 😈 😈 😈 😈 😈 😈 😈 😈
Chris07LBNew Jersey · May 3, 2007#46holy OLD ASS post bump!!!
jonr0613ME · Jan 11, 2009#47what kind of paint should i use for the valve cover?😕
eTiMaGoBangkok, Thailand · Jan 11, 2009#48 Originally Posted by
Chris07LB ↑ holy OLD ASS post bump!!!
x2 😁
Originally Posted by
jonr0613 ↑ what kind of paint should i use for the valve cover?😕
read up, high temp paint, I believe VHT was recommended 🤷
m911gtChicago · Jan 11, 2009#49looks nice!