Yarisworld Archive

TOols for suspension

15 posts · 8,725 views

BlenjarOriginal postCT · Jul 13, 2006#1
What are the tools to install a shock, strut and springs?
is it worth doing it myself or paying someone to do it?

Replies 14

spacemanoeuvresBucks County, PA · Jul 13, 2006#2
I was curious about this too, since I don't fancy paying some dude $150-$200 to install lowering springs.

But it'd prob be better to pay someone who knows what they're doing 🤷
eight_headsLA, USA · Jul 13, 2006#3
well all you should need other than normal hand tools is a spring compressor...which you can rent from auto parts places like autozone for free...
johnnyfiveMilwaukee WI · Jul 14, 2006#4
yeah, suspension is fairl easy work, just take your time, pay attention to exactly how the old part comes out, and have fun, and think if it takes you 4 hours to do it, its just like you made 50$ an hour :)
田中秀樹日本 · Jul 14, 2006#5
i use torque wrench to make sure everything back to spec.
C2AUTOSPLLoma Linda, CA · Jul 14, 2006#6
Here's a list:

FLoor Jack
Jack stands
Tire wrench
allen wrench
17mm wrench
19mm wrench
12-14mm wrench
springs compressor
Power of Zeus
Pack of beer
Chris07LBNew Jersey · Jul 14, 2006#7
Originally Posted by C2AUTOSPL
Here's a list:

FLoor Jack
Jack stands
Tire wrench
allen wrench
17mm wrench
19mm wrench
12-14mm wrench
springs compressor
Power of Zeus
Pack of beer
Need to make one correction...

Roll the keg-o-rator over closer to the tool box. 🙂
You will spend more time drinking beers, then it takes to actually do the install.... well I will anyway, "results may vary", lol.
The rears for example, are a cake walk! Start there first, and build your confidence. 😛 😁
BlenjarThread starterCT · Jul 14, 2006#8
lol haha thx guys.
cause the spring, strut and shocks are about 270 and to install them is 370....tahts pretty weak, i dont think I'll do that.

-- Blen
JDMVitzT.O. · Jul 14, 2006#9
anyone going to do a DIY? I have experience installing suspension for my other car, but i'm always nervous on doing it on a vehicle that i'm not familiar with.
Chris07LBNew Jersey · Jul 14, 2006#10
Originally Posted by JDMVitz
anyone going to do a DIY? I have experience installing suspension for my other car, but i'm always nervous on doing it on a vehicle that i'm not familiar with.
Next week. 🙂
eight_headsLA, USA · Jul 14, 2006#11
now for anyone that has added new suspension... are there any camber adjustments necessary?
BooMadison, WI · Jul 21, 2006#12
My only concern are the specific torque on the bolt/nuts.. Once I was over tighten a strut nut and broke the whole strut mount. 🙁
El Jefecalifornia uber alles! (sacramento) · Jul 21, 2006#13
Originally Posted by eight_heads
now for anyone that has added new suspension... are there any camber adjustments necessary?
i'll let you know next week, im gonna put mine on the alignment rack and see what i need to chagne, but as of right now it drives straight.
MooseCumming, GA · Jul 29, 2006#14
Originally Posted by El Jefe
i'll let you know next week, im gonna put mine on the alignment rack and see what i need to chagne, but as of right now it drives straight.
Driving straight is not your only concern- making sure that your tires are not wearing incorrectly (and thus, have less of a patch on the road, less grip, blah blah) is just as important.

Even if everything looks/feels great, you should always get an alignment after doing any suspension work. Just make sure the shop you pick can get the car onto a lift. 😉 Knowing the factory specifications for your car for toe, camber and caster does not hurt, either- that is what the shop should set it back to.