Chris07LBOriginal postNew Jersey · Jul 11, 2006#1One of the things that bug's me about our cars, is the very noticable exterior color overspray in the inner wheel wells.
Now maybe because I own a Polar White, its a little more noticable then other exterior colors, but all the same, it needed fixing. 😁
One can was enough to do all four wheel wells, and there was no need for heavy or second coats. One pass covers very well, and the spray of the coating was very easy to control.
I took my time, and removed one wheel at a time, being careful not to Undercoat any brake lines, plastics, springs, shocks, etc. Again, the control from this can's nozzel made the job very easy to get in and around tight areas.
Starting with the front drivers side..
BEFORE Picture not included in this copy Picture not included in this copy Lots of overspray as you can see, and just ugly when looking at a side profile of the car IMO.
Cleaned the area up well, and Undercoated the front..
AFTER Picture not included in this copy Picture not included in this copy Ah, much better! 👏
Now moving onto the rear..
Before & After Picture not included in this copy Picture not included in this copy I am letting the Undercoating "cure" overnight, as I did not need to drive it after I did everything today.
If you can go 12 hours, you should be fine. It was still a bit tacky after about 2 hours, and I didnt want to risk kicking up road grime, and having it stick to the fresh surface.
Next How-To? - Spring Install 👍
6 attachments not included in this copy
Replies 44
mochi63New York · Jul 11, 2006#2what happen to the picture?
TRD_YarisAustin, Texas · Jul 11, 2006#3i think he's still busy adding them. Uploading pics and doing a DIY write up are a pain in the arse.
i'm anxious to see the results..it should reduce road noise JUST A bit.
El Jefecalifornia uber alles! (sacramento) · Jul 12, 2006#4so what brand of stuff did you use? i plan on doing this sometime, i bet it looks really bad when you have big wheels that you can see through
03Z33SoCal · Jul 12, 2006#5Or you could just lower the car to get rid of the wheel gap🙄 😆
Chris07LBThread starterNew Jersey · Jul 12, 2006#6YOU CANT SEE THE PICTURES???
They have been up and working since i posted. 🤷
Works fine for me.
Chris07LBThread starterNew Jersey · Jul 12, 2006#7Please tell me if you can view the pictures yet 🤷
johnnyfiveMilwaukee WI · Jul 12, 2006#8can see pics fine, and nice work by the way ;)
TC-LIFTBACKMinneapolis, MN · Jul 12, 2006#9That's a great writeup. I'll do that at the same time I coat my calipers and drums.
Thanks Chris!
Chris07LBThread starterNew Jersey · Jul 12, 2006#10You're Welcome. 🙂
Glad to see some excitement over the "little things." 😎
I though most would deem it a complete and total waste of time. 🙄
JDMVitzT.O. · Jul 12, 2006#11Thanks for the article! Looking forward to your spring install!
jcoveBrampton, Ontario, Canada · Jul 12, 2006#12 Originally Posted by Chris07LB
You're Welcome. 🙂
Glad to see some excitement over the "little things." 😎
I though most would deem it a complete and total waste of time. 🙄
👏 👍 👍
NOPE. Looks great. I was thinking of it, but I haven't had the time lately. I've been busy at work and at home, so I'm not on here much any more, just about once or twice a week. I was thinking of doing this, but now that I see it I'm motivated to get it done sooner!! Great work.
MooseCumming, GA · Jul 12, 2006#13Awesome! I live on a dirt road and also drive a whitey, so this may be well worth it, especially if/when the aftermarket wheels get slapped on.
MooseCumming, GA · Jul 15, 2006#14Well, I pulled my wheels off the other day to prep the area to do this, and it's already done! 😎
Maybe the sedan comes with the coating stock whereas the LB doesn't? I dunno, but I'm not complaining.
hhcchenseattle · Jul 15, 2006#15for those cars that's been done...
could it be that it's just sedans...?
or does it include liftbacks with more options on...?
or could it be part of the winter area package...?
Chris07LBThread starterNew Jersey · Jul 15, 2006#16 Originally Posted by hhcchen
for those cars that's been done...
could it be that it's just sedans...?
or does it include liftbacks with more options on...?
or could it be part of the winter area package...?
I have Cold Weather Package a.k.a. Winter Package, if they are indeed the same thing? 🤷
Either way, compare the pics above, and the choice is clear.
BTW - you could just use Black Exterior spray paint as well. 👍
TRD_YarisAustin, Texas · Jul 16, 2006#17 Originally Posted by Chris07LB
I have Cold Weather Package a.k.a. Winter Package, if they are indeed the same thing? 🤷
Either way, compare the pics above, and the choice is clear.
BTW - you could just use Black Exterior spray paint as well. 👍
yeah, but the black paint is not going to stand up against the constant barrage like the rubberized undercoating. plus, this should sound insulate the wheel wells just a bit more, if you consider that an improvemnt (c'mon! i love the sounds of rocks hitting my fender liners!!)
Chris07LBThread starterNew Jersey · Jul 16, 2006#18 Originally Posted by TRD_Yaris
yeah, but the black paint is not going to stand up against the constant barrage like the rubberized undercoating. plus, this should sound insulate the wheel wells just a bit more, if you consider that an improvemnt (c'mon! i love the sounds of rocks hitting my fender liners!!)
🤣 ... It was just another option for those looking to change the look.. Black paint is good, Undercoating is better. 👍
Chris07LBThread starterNew Jersey · Aug 22, 2006#19 >< BUMP 4 THE NEWBIES ><
SimmZQuebec · Aug 22, 2006#20Wow! Freakin' nice job sir, it look awesome! 👏
Just an IMPORTANT note for people interested to do like you. It's VERY important to coat metal parts when the car is brand new or very near. Because if you wait something like a year, even if it's invisible, metal parts begin to have some oxydation after a year of humidity, rain and snow. If you put a rubber coating on this metal parts, the oxydation process will continue under the coat of rubber and major rust will happen after.
That's same thing with anti-rust treatment, they must be done straight from the dealer when your car is brand new. If you wait a year to do it, rust will happen UNDER the coat of anti-rust treatment.
Chris07LBThread starterNew Jersey · Oct 16, 2006#21<> BUMP 4 THE NEWBIES <>
YamilRSan Diego, CA · Oct 16, 2006#22I've never seen that done...and I like it. Where can I get a can of undercoating?
KatanaUnder the hood! · Oct 16, 2006#23Funny.In Europe we have some plastic covers that cover the body colour...
redyarisOrlando, FL · Jun 3, 2007#24I did this today. Took all of an hour to complete, one wheel at a time.
Here are some pics. Guys and gals, this is the easiest thing to do to make your car look better. Its in the details.
4 attachments not included in this copy
Chris07LBThread starterNew Jersey · Jun 3, 2007#25Big mistake getting it on your muffler in the back.
Be very careful, with the type I used, it cautioned not to get even the smallest bit on the muffler (hot surface), as it can flash and cause a fire.
Hopefully this wont be the case with yours. 😲
redyarisOrlando, FL · Jun 3, 2007#26Ouch!!! I was afraid of that. Can anything take it off??
brickhardmeatInner City, Dallas · Jun 3, 2007#27it will probably just BURN off😈 😆
ouch, boom
Doc ZaiusOttawa, ON, Canada · Jun 3, 2007#28What about that big nut in the bottom right-hand corner of the fender? What if you ever have to get it off? Even though it would be visible afterwards, I think masking it off (and other movable hardware) might be a good idea... yes?
But still... looks much nicer... more "defined"! 👍
cali yarisCanoga Park, CA · Jun 3, 2007#29simply brilliant-- I'll have to do this.
SpeedzBrisbane, Australia · Jun 4, 2007#30Toyota dont provide you with plastic inner fenders? Optional purchase?
Australian model at least have plastic fenders at the front wheel well...
Cheers
Chris07LBThread starterNew Jersey · Jun 4, 2007#31 Originally Posted by
redyaris ↑ Ouch!!! I was afraid of that. Can anything take it off??
If it was MY car, id take the 30seconds it takes to REMOVE the muffler from the car, and scrape/sand/lightly grind all that off.
redyarisOrlando, FL · Jun 4, 2007#32Cool...thanks Chris.
Chris07LBThread starterNew Jersey · Jun 4, 2007#33No problem. Would just hate to see you chance it, and then post up your car burnt to a fine crisp or something. 😛
Doc ZaiusOttawa, ON, Canada · Jun 4, 2007#34Just going through some of the replies on the previous page of this thread:
Originally Posted by
SimmZ ↑ Just an IMPORTANT note for people interested to do like you. It's VERY important to coat metal parts when the car is brand new or very near. Because if you wait something like a year, even if it's invisible, metal parts begin to have some oxydation after a year of humidity, rain and snow. If you put a rubber coating on this metal parts, the oxydation process will continue under the coat of rubber and major rust will happen after.
Is that true? I've had this car for more than a year now. Both winters I've had it rust-proofed with an oil-based spray (
Krown for you Canadians). I'd like to undercoat the wheel wells for cosmetics, but don't want to increase the chance of rusting. Thoughts from anyone?? 🤷
YarisTom73Johnstown, PA · Jun 4, 2007#35This may not be right, but my understanding is that in order for rust to really penetrate, it needs a combination of air and moisture. By coating your metal, even bare metal, with something like undercoating, it prevents one or both of these things from being present, therefore slowing or stopping the rust process. 🤷 So, better late than never, IMO.
Also, I've used the truck bed coating instead of the undercoating in the past, and I like it better because i think it's a little bit more scuff-resistant. But, I may be a crackhead, as it costs more. Good luck! 😎
Chris07LBThread starterNew Jersey · Jun 4, 2007#36read the label on the can pictured in post #1.
QTvDWGbziqGjbkbMexico · Sep 20, 2007#37nic3 work here Chris. i think i'll do it tomorrow... before raining season start.
quick question 4 anyone that did it already. did the undercoat dry pretty fast, like in an hour or will i have 2 wait one day before i drive my car?
reznuntSocal · Sep 20, 2007#38this is what i want to do to my floor after i take out the rear seats. hides the white paint! great idea thanks!
Pitt YarisPittsburgh · Jan 22, 2009#39hate to ttt this, but figured it's old and many haven't seen it. living in pa and dealing with crappy winters, i'm gonna do this in the summer as well as the undercarriage of the car. old car rusted big time..fuel line, brake line, exhaust, muffler.
fujiHonolulu · Jan 24, 2009#40I think if a product like Second Skin audio Spectrum or Quietcar was used to coat the wheel wells, it would work really well to get rid of road noise. I am planning on doing this.
Meteorite_MartyWaterloo, Ontario, Canada · Jan 25, 2009#41 Originally Posted by
Katana ↑ Funny.In Europe we have some plastic covers that cover the body colour...
Same in Canada. The entire wheel well has black plastic housing that snaps in. You can even see the holes for the housing to snap into, in the spray project pictures people have snapped.
Meteorite_MartyWaterloo, Ontario, Canada · Jan 25, 2009#42 Originally Posted by
Speedz ↑ Toyota dont provide you with plastic inner fenders? Optional purchase?
Australian model at least have plastic fenders at the front wheel well...
Cheers
Same in Canada. The entire wheel well has black plastic housing that snaps in. You can even see the holes for the housing to snap into, in the spray project pictures people have snapped.
Meteorite_MartyWaterloo, Ontario, Canada · Jan 25, 2009#43Here are some pictures of the front wheel wells. Maybe everyone has the same thing already. 🤷
Sorry for the filthy car. Everything is slush, grit, ice, and salt during winter here.
5 attachments not included in this copy
cali yarisCanoga Park, CA · Jan 25, 2009#44No rubberizing on my car, just white paint up under there. Not only is it ugly, but the undercoating will cut down on noise.
jeeper5usaEdison, NJ · Aug 10, 2012#45I used the canned Herculiner from Pep Boys, on mine over a weekend (2 coats), It looks great, and I even used the excess for the bottom underneath as well. I am well protected for the salty winter months here in Jersey!