Yarisworld Archive

CAI for YARIS????

25 posts · 10,105 views

Bryman31Original postColorado · Jul 8, 2006#1
will this work?? i found it on trdsource.com says it fits yaris S sedan anyone have it?? is it ok?? and most of all is it even a real fitting part??

Picture not included in this copy


here is the info on it

Part Number PTR03-52070
Part Name Cold-Air Intake
Part Type Cold-Air Intakes
Part Weight (lbs) 4
Part Manufacturer TRD
Dealer Price $350.00
Discount Price $330.00


Continuing the tradition of quality performance enhancing parts,TRD is now offering a Cold Air Intake system for all Yaris Models. The TRD Cold Air Intake features include:- Mandrel bent aluminum tubingthat allows for smoother air flow into the engine increasing both horsepower and torque. Up to an 8 percent horsepower improvement over stock air boxes.- A reusable high-flow , low restriction air filter.- A patented bypass valve that opens if the air inlet ingestwater saving the engine from water damage.

Replies 24

heylookitsjamesRiverside CA · Jul 8, 2006#2
Yep.
Bryman31Thread starterColorado · Jul 8, 2006#3
and it will fit a yarsi S the 4 door right?
MooseCumming, GA · Jul 8, 2006#4
Ehh, TRD is great and all, but $330 for an intake? 👎 Most of that cost is the warranty.

Injen makes a GREAT intake, and their CAI (if you can wait a couple months) will probably be $220 or so. Buy a bypass valve for $30 more and you're set.
Bryman31Thread starterColorado · Jul 8, 2006#5
hmmmm.....injen is nice.........i used to have it on my cavalier, but can i wait is the problem...im a very impatient person lol


HanSelOC · Jul 11, 2006#6
ehh..id wait a lil while to save $100 or so..
i have a buddy that works at aem.. that make some pretty good intakes..ill ask about the progress on those..(he works in R&D)

there will be intake companies pouring in for sure..one of the most common mods anyone can make.
Chris07LBNew Jersey · Jul 11, 2006#7
Give it some time.. All the major intake guys are testing & building now for the Yaris... Once they all get released, the prices are sure to come down a bit, and be competitive. 🙂
HanSelOC · Jul 12, 2006#8
very true..
i hope its competitive so prices will be under control.
soros151Puerto Rico · Jul 12, 2006#9
Actually thats about the price some of the CAIs go. I say, wait for the Injen one.Patience is the key.
mikeukrainetzCanada · Jul 12, 2006#10
license to print money....
bulldogs2kVa Beach · Jul 13, 2006#11
I would wait for the injen or aem. I currently have a injen intake on my S2000 and i bought it for 80 dollars :) bought it from a guy on a s2000 forum.
soros151Puerto Rico · Jul 13, 2006#12
^^ props on that
HanSelOC · Jul 14, 2006#13
aem short rams can be had for like $75 if i remember correctly.
yea just drive the car stock for a while and wait for the market to develop. youll have a greater selection and better prices then.
Ran KizamaCanton, GA · Jul 14, 2006#14
Originally Posted by Moose
Ehh, TRD is great and all, but $330 for an intake? 👎 Most of that cost is the warranty.
If the extra cost keeps my warranty intact, then I'll pay it.
TRD_YarisAustin, Texas · Jul 15, 2006#15
Originally Posted by Ran Kizama
If the extra cost keeps my warranty intact, then I'll pay it.
or just switch your stock intake back before you take it in to the dealership. I know the computers datalog, but fuk em.
Chris07LBNew Jersey · Jul 15, 2006#16
Originally Posted by Ran Kizama
If the extra cost keeps my warranty intact, then I'll pay it.
And thats exactly why they know they can price 'em that high! 🙄
MooseCumming, GA · Jul 15, 2006#17
Just a quick note (specifically for you, Ron)- it is illegal for any manufacturer to void a vehicle's entire warranty for one part. If you were to go to a dealership with an aftermarket intake on the vehicle and you had a problem which should be covered under warranty, Toyota would have to prove, without a shadow of a doubt, that your air intake is what caused that specific problem. Manufacturers can only void warranties on parts that are specifically damaged by the modification in question.

Now, another note for you guys looking to do header and exhaust mods to your Yarii- if you go to the dealership with, say, a bad O2 sensor or any other emission control part (which is actually, under federal law, covered until 8 years/80K miles) and you have an aftermarket header or exhaust, the chances are nil that the O2 sensor will be covered. Toyota (or any other manufacturer) will argue to the death that those two mods caused the premature failure of the sensor.
ChinoCharlesOH · Jul 15, 2006#18
Hey, I'll be buying the TRD intake. I don't mind shelling out a few (OK, a hundred or more) extra bucks to show Toyota that I love the fact that they give a shit about their aftermarket-thirsty clientel. The suspension they have is amazing... I have no reason to believe the intake or whatever else they come out with will be any less. If the TRD gods are reading this, can we have a supercharger please? Pretty please?
Chris07LBNew Jersey · Jul 15, 2006#19
Originally Posted by Moose
Just a quick note (specifically for you, Ron)- it is illegal for any manufacturer to void a vehicle's entire warranty for one part. If you were to go to a dealership with an aftermarket intake on the vehicle and you had a problem which should be covered under warranty, Toyota would have to prove, without a shadow of a doubt, that your air intake is what caused that specific problem. Manufacturers can only void warranties on parts that are specifically damaged by the modification in question.

Now, another note for you guys looking to do header and exhaust mods to your Yarii- if you go to the dealership with, say, a bad O2 sensor or any other emission control part (which is actually, under federal law, covered until 8 years/80K miles) and you have an aftermarket header or exhaust, the chances are nil that the O2 sensor will be covered. Toyota (or any other manufacturer) will argue to the death that those two mods caused the premature failure of the sensor.
I already posted all the Magnason Moss Act info, but knowone seemed to care...

Im not afraid to mod all my cars/trucks. 👍
BillsteinSo. Ca. · Dec 10, 2006#20
Originally Posted by HanSel ↑
ehh..id wait a lil while to save $100 or so..
i have a buddy that works at aem.. that make some pretty good intakes..ill ask about the progress on those..(he works in R&D)

there will be intake companies pouring in for sure..one of the most common mods anyone can make.
AEM has the patent on the air bypass could this Trd be aem?😲
Chris07LBNew Jersey · Dec 10, 2006#21
Wouldn't be too surprised.. it happends a LOT in the industry.

Take for example the new FRAM Boost intakes... they are renamed, recolored AEM products, made for FRAM. Even the instructions are the same, with the AEM logo's blacked out. FRAM just uses their filter, and rebrands the entire intake as their own.

So if they are paying AEM for the intakes to rebadge, Im guessing Toyota could/would do the same thing.
DTM_YarisDulles, VA · Dec 10, 2006#22
I'll send you guys some pics of our Stainless CAI. If interested we can get them to you guys relatively at cost with shipping.
graywolf_14Wichita ks · Dec 28, 2006#23
Ok is the trd peice a actual cai or just a ram air?
Black YarisToledo, OH · Dec 28, 2006#24
Originally Posted by graywolf_14 ↑
Ok is the trd peice a actual cai or just a ram air?
Picture not included in this copy

just a CAI
graywolf_14Wichita ks · Dec 29, 2006#25
Thanx the one they have pictured looked like a short ram.