Yarisworld Archive

Liftback Spoiler Installation

26 posts · 24,101 views

ToddhataOriginal postAnaheim, CA · Jun 9, 2006#1
Has anyone installed a spoiler on their liftback? Mine is due in Tuesday and I'm going to attempt the install with a friend. I downloaded the pdf file, which is all pictures, no text, just wondering if anyone had any tips on their own experience doing the job.

Replies 25

boxerboyNorth Carolina · Jun 10, 2006#2
I will be installing mine my self. I don"t know if this helps but, I have installed body part (spoilers, side skirts and frount lips) on my WRX. The instructions only have pics. Just take your time and get it perfect. Please let us know how it went and give tips.
eight_headsLA, USA · Jun 11, 2006#3
i say do it and post us some pics!
ToddhataThread starterAnaheim, CA · Jun 11, 2006#4
ok, I'll be the guinea pig and do it next week, and post some pics
DJ_TrizzakVancouver, BC · Jun 13, 2006#5
Originally Posted by Toddhata
ok, I'll be the guinea pig and do it next week, and post some pics
which spoiler you putting on? -
ToddhataThread starterAnaheim, CA · Jun 13, 2006#6
Spoiler, Liftback - Blazing Blue - 2007 Toyota Yaris 08150-52870-J1

Picture not included in this copy
but it's Blazing Blue, this is the only pic I could find of it.

I'll possibly be doing it tonight, it's supposed to come in ups today. But after I do a speaker and ipod install in my dad's car tonight.
DJ_TrizzakVancouver, BC · Jun 13, 2006#7
oo dope - good luck on it - ya ever check'd out the rally spoiler? it's nice - but you'll need rims first though
RonVancouver · Jun 13, 2006#8
apparently the RS spoiler has 6 mounting holes, whereas the rally spoiler uses only 2 mounting points.

where did you find the install pdf?
ToddhataThread starterAnaheim, CA · Jun 14, 2006#9
Ok, it's done, didn't take too long, just had to make a trip to Lowes for a bigger drill bit and a round file.

here's pics of some of the install

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

there's 4 holes, only 2 you screw into though, the other 2 are placeholders I guess, just plastic that pops into the 2 middle smaller holes.

the directions said to remove the panel in the rear door, it wasn't really necessary, I guess to clean up any shavings that may have fallen to the bottom of the door, but I didn't find any.

the pdf file in one of the DIY sections is a different one than I got with my spoiler. I'll try to scan and turn mine into a pdf if I can get a full version of adobe.
boxerboyNorth Carolina · Jun 14, 2006#10
thanks Toddhata
Chris07LBNew Jersey · Jun 14, 2006#11
Maybe a dumb question, but did it come pre-painted?
ToddhataThread starterAnaheim, CA · Jun 14, 2006#12
yes, you can order in several different colors, I got it here:

http://www.toyotapartsstore.com/

they shipped it pretty quickly, and have good prices. Not too much more than the employee prices I got on the other accessories I ordered from my local Toyota dealer. The spoiler was twice as much from the dealer so I ordered it online.
KSIbuckyFond du Lac, WI · Jun 15, 2006#13
Do you have to make any holes or make any holes bigger
cburacPanama · Jun 15, 2006#14
Originally Posted by Toddhata
yes, you can order in several different colors, I got it here:

http://www.toyotapartsstore.com/

they shipped it pretty quickly, and have good prices. Not too much more than the employee prices I got on the other accessories I ordered from my local Toyota dealer. The spoiler was twice as much from the dealer so I ordered it online.

I just check the toyota parts store site and they have differents colors of spoilers ..
my questions is I live in panama, central america, my factory color says Blue Mica Metallic.. I saw the pic's of your car and it's look like mine, with color is your car ? is the same code that mine? I'm asking because I have a trip to USA and I could buy my spoiler there , and save a lot of bucks...... I dont know if the paint changes from country to country... thanks a lot..


p.d. you can see pic's of my car in the member rides section... my id is cburac


cheers👍
ToddhataThread starterAnaheim, CA · Jun 15, 2006#15
You have to drill 4 holes, it comes with a template to tape on. 3 holes lined up perfectly, but the far left was off by about 1/4", luckily I was able to drill the bracket hole enough to make it work.

My color is Blazing Blue Pearl (color code 8TO), different than your Blue Mica Metallic.

Here's the 2007 Toyota color code chart for the U.S.
http://www.toddhata.com/pics/Toyota_...olor_Chart.xls
djfujiSan Diego, CA · Feb 13, 2007#16
what size drill bits did you use? i just got mine in today and i'm not very familiar with drill lingo.
uncleyarisToronto · Feb 13, 2007#17
excellent job, good pics, and info👍
KSIbuckyFond du Lac, WI · Feb 18, 2007#18
Originally Posted by djfuji ↑
what size drill bits did you use? i just got mine in today and i'm not very familiar with drill lingo.

i think im going to learn how to measure up screw because theres special ways of making good hole to size and everything
JDM_EK3Manitoba, Canada · Feb 19, 2007#19
Originally Posted by Ron ↑
apparently the RS spoiler has 6 mounting holes, whereas the rally spoiler uses only 2 mounting points.

where did you find the install pdf?
Has this ever been confirmed? As I personally have always wanted the Ralley Spoiler for my RS.
JDM_EK3Manitoba, Canada · Feb 20, 2007#20
Originally Posted by JDM_EK3 ↑
Has this ever been confirmed? As I personally have always wanted the Ralley Spoiler for my RS.
Nobody? 🙄
TheRealEnthMiami, FL · Apr 14, 2009#21
I can confirm it has 2 holes? If thats what u want?
tk-421Dagobah · Jun 10, 2009#22
Someone please post a pic of the OEM holes to see if it can be incorporated into the RBK spoiler installation instructions. 🙌
1NZYaris1New Zealand · Jun 10, 2009#23
done

3 attachments not included in this copy

tk-421Dagobah · Jun 11, 2009#24
Thanks for the pics! I believe it can be done, but I will ask the fabricator to make sure.
marcustoronto, canada · Jun 11, 2009#25
awaiting.......
tk-421Dagobah · Aug 9, 2009#26
oops forgot to update this thread... 😳

Installation can be accomplished using OEM mounting positions, but one needs to drill the trunk (and through the OEM holes) from the inside out in order to get them screwed the other way around. That in turn means that you might need longer screws in order to reach the spoiler and get enough threads in the back.