Yarisworld Archive

HID

225 posts · 66,253 views · page 1 of 5

07yaris_feOriginal postCanada · May 21, 2006#1
anyone install HID kit to 2007 Yaris???
I'm having problem with the HID kit that i have.
I got a H4 HID kit it work but my DRL have problem
anyone can tell me how to disable the DRL?
Once I release handbrake, the light keep flashing........
so how i'm driving with my HID on all the time =(

please help!!!!!!!!!!!!!!!!!!! THANKS

Replies 224

punchBarrie, ontario · May 21, 2006#2
please tell me that huge pic, isn't your sig....

and sorry i have no idea what could be wrong with your HID
silverRSOttawa Ontario Canada · May 21, 2006#3
not sure dude Im not an HID expert, but seriously though why all that cash bro??? just pop in some $100 PIAA's and it looks killer trust me, I replaced my lamps and fog's. do it......do it
SophieSleepsMA · May 21, 2006#4
Originally Posted by silverRS
not sure dude Im not an HID expert, but seriously though why all that cash bro??? just pop in some $100 PIAA's and it looks killer trust me, I replaced my lamps and fog's. do it......do it
You obviously don't know much about HID's.

$100 PIAA's output the same or less light as the factory bulb.

HID's output about 3x more visible light and use less energy.
Most aftermarket bulbs actually significantly decrease your visible light...but it makes your light look cooler.






Link to the H4 HID you have?

Wiring should be pretty straight forward.
Get rid of long lengths of slack in the wiring because it affects the firing of the ballast.
ChickonNew York · May 22, 2006#5
in order to get help from any of us.

First you have to tell us what EXCATLY the problem that you have ?

and yes, most aftermarket blub give you less light. but some, will get a little more than factory.

and for HID, it does use less energy but it draws alot of current during the first few minutes. just make sure that the wire can handle it.
RonVancouver · May 22, 2006#6
try disabling your day time running lights
silverRSOttawa Ontario Canada · May 22, 2006#7
ok sophie I know exactly what HID lights are, so try not to sound so cool next time you want to say something. All Im trying to say is installing nice PIAA bulbs will absolutely increase visibility since I have them in already, instead of installing a three times the price HID kit. I like the kits no doubt (www.buyhidkit.com) just suggesting other methods so chillax.
RonVancouver · May 23, 2006#8
i've had really good success with piaa bulbs in the past also. but they are pricey for what they are. definite improvement from stock, but $100+cdn is a lot to spend on a couple of bulbs.
tca4Delta,BC · May 23, 2006#9
Does anyone know if the Fog lights are H11 or not
SmellyTofuSydney · May 23, 2006#10
Originally Posted by tca4
Does anyone know if the Fog lights are H11 or not
Ur owner's manual has that info. Have a read. It's there for a reason. :)

Blue output lights of any nature decrease output, increase glare, even worse in rain, fog, and snow, and your eyes (and other road user's eyes) are less sensitive to the blue spectrum. Adding a colour filter does not make it "cool" but that last point is subjective. The rest is factual.
silverRSOttawa Ontario Canada · May 23, 2006#11
yeah I agree HID lights do piss me off, but If you install 5000's or under they aren't that bad
SmellyTofuSydney · May 23, 2006#12
"they aren't that bad" = worse than stock
silverRSOttawa Ontario Canada · May 24, 2006#13
worse than stock?? no 5000's (HID's) and lower are brighter than 6000's and above (less blue and purple) and are way brighter than stock. Just go look at the site I posted.
SmellyTofuSydney · May 24, 2006#14
Light is measured in Lumens... not °K. Colour temp does not play a role in output. Any tinting of halogen will reduce light output over the clear bulb equivalent.

Colour temperature however creates a sense of brightness without the bright bit. It's the glare the fools the brain to thinking it's bright. This rule applies to any sort of lights.

Mind you retrofitting HID to a car is illegal so get ready for a fix-it ticket. :)
TC-LIFTBACKMinneapolis, MN · May 24, 2006#15
You are going to want to get some custom projectors or find some projectors which will work for the Yaris before you throw in a HID bulbs/ballast set.

degrees K determines the color temperature. 5500 is natural white light (like the sun), the greater the number, the more blue to purple it gets, the less the number the more yellow it gets. It appears brightest when it's around the 5500K range.

Lumens is the light strenght output. HID's give off more Lumens than the halogen bulbs (they are more efficient in terms of Lumens/watt usage) but you don't want it to glare, so people are going to have to figure out a projector solution for this car, if that's your thing. It's pricey, and because of that, not worth it. Rather spend money on modding other parts of the car or buy a new furance for the house.

Maxima.org has lots of information on HID's.
SophieSleepsMA · May 24, 2006#16
Originally Posted by silverRS
All Im trying to say is installing nice PIAA bulbs will absolutely increase visibility since I have them in already,
That's because you're stupid.

Any coating on glass is a filter. You filter anything, and you will get less visible light emitting out and more heat generated on the surface.

Your PIAA is a filtered bulb.

Put a blue sunshade over your window. You get less light but it's now blue. It's the same thing that's happening to your bulb.

The site you gave www.buyhidbulbs.com lists autovizion as the manufacturer of the bulbs and ballasts.
Good luck using them.
SophieSleepsMA · May 24, 2006#17
Originally Posted by SmellyTofu
Light is measured in Lumens... not °K. Colour temp does not play a role in output. Any tinting of halogen will reduce light output over the clear bulb equivalent.

Colour temperature however creates a sense of brightness without the bright bit. It's the glare the fools the brain to thinking it's bright. This rule applies to any sort of lights.

Mind you retrofitting HID to a car is illegal so get ready for a fix-it ticket. :)
True, but K temp does affect visible light output.

Sounds like you know your stuff about lighting and are past the ricing that these other people are just getting into.


Changes in color temp move the range of light output so that the majority of light falls in a different wavelength of light.

They may output the same in Lumens, but if the human eye can't perceive the light, it's useless.

4k bulbs outputting 3k lumens and a 8k bulb outputting 3k lumens will be very different in terms of visible light.

Regardless.
4300-5000k is generally accepted as the best for the most usable light.
silverRSOttawa Ontario Canada · May 24, 2006#18
Ok Sophie I don't know what's up your @$$ exactly but do you honestly think I don't know this???? I'm just getting into 'ricing' lol.... I’m not sure why I'm even responding to your blabbery, but you'll have to remove that object from your rear one of these days I'm afraid lol.......but please feel free to give all the information you want that I 'have no idea about'.....yes please.....a publishing perhaps would be great I'll buy one.
SophieSleepsMA · May 24, 2006#19
Originally Posted by silverRS
Ok Sophie I don't know what's up your @$$ exactly but do you honestly think I don't know this???? I'm just getting into 'ricing' lol.... I’m not sure why I'm even responding to your blabbery, but you'll have to remove that object from your rear one of these days I'm afraid lol.......but please feel free to give all the information you want that I 'have no idea about'.....yes please.....a publishing perhaps would be great I'll buy one.
It's just an online forum man. It's like I called your baby retarded and kicked him down the stairs.

Telling someone to buy 100 dollar bulbs that will decrease your visible light is pretty stupid. If you really knew anything about lighting, you wouldn't spend 200 bucks on filtered headlights and foglight bulbs, nor would you recommend it to other people.
VitzBoyPA · May 25, 2006#20
Originally Posted by SophieSleeps
That's because you're stupid.
No need to resort to personal insults and putting down another member. It will not be tolerated on the forum.

All of us started learning about cars somewhere/sometime and none of us were born with the knowledge, so if you feel you have something constructive to say, please say it in a mature manner. Thanks.
silverRSOttawa Ontario Canada · May 25, 2006#21
couldn't agree with you more and I apologize if I have jeopardized my membership writes, yet it is frustrating when ignorant people get in the way of this knowledge and opinion sharing. I was simply suggesting a pair of PIAA lights to a member who's HID light system was not co-operating. I said this because 'most' people who purchase aftermarket HID systems are looking for that bright blue/purple tinge, which PIAA's will almost do. Anyways someone has to be the bigger man/woman and I'll put this to sleep for good. lol
pennystocksChicago, IL · May 25, 2006#22
So wats a PIAA, and i really hope your 100$ bulbs converts into $20US for the cheap eurodezinez ones on ebay that blow every 6 weeks, that i just bought btw :)

Also the "fake" HID's as replacements for the real HID convert is not a good one. But for $200 vs $20, i'd just go w/ the fake HID's for the $$$.

Also, after all the bitching, you notice he never replied? lol
SophieSleepsMA · May 25, 2006#23
Originally Posted by pennystocks
So wats a PIAA, and i really hope your 100$ bulbs converts into $20US for the cheap eurodezinez ones on ebay that blow every 6 weeks, that i just bought btw :)

Also the "fake" HID's as replacements for the real HID convert is not a good one. But for $200 vs $20, i'd just go w/ the fake HID's for the $$$.

Also, after all the bitching, you notice he never replied? lol
My apologies. Low blood sugar = grumpy.

Pennystocks, PIAA is a company that makes lighting. They are a big name brand and can be trusted.

They produced bulbs to compete with el-cheapo bulbs. They coated their bulbs with a light bluish filter so that their bulbs gave off a slight rice-blue look without reducing visible light horribly like others.

They are expensive however. In my opinion, a complete waste of money.

HID are a better option.

Check out www.hidplanet.com for actual info on the true capabilities of HID lighting.
silverRSOttawa Ontario Canada · May 25, 2006#24
so sophie do you think its possible to put a proper HID system ($500) in my 2007 Yaris?
SophieSleepsMA · May 25, 2006#25
Originally Posted by silverRS
so sophie do you think its possible to put a proper HID system ($500) in my 2007 Yaris?
Yes. A pair of Denso ballasts can be had for under 200. Philips D2R or D2S bulbs can be had for about 80.


If you want to go all out, go for a D2S and a projector.
Otherwise, if you want to stick with reflector type lighting, go with a D2R so you don't give off glare to oncoming traffic.

Factory HID are pretty much always better than aftermarket designs, but it's still much better than bulbs.

The headlight on a yaris is pretty big and open. I say retrofit it.

Some projects I've done before.
When I get rid of my freakin land rover, and possibly get into a Yaris, it will be one of my first mods.

I told myself after driving HID, that I would never drive a car that didn't have them.
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
Picture not included in this copy
silverRSOttawa Ontario Canada · May 26, 2006#26
So I just need to buy the ballasts and the bulbs in a kit probably.....but you think I need to retrofit my stock lights (too big) you don't think they will look good anyways?? cause theres like nothing for the Yaris yet. Nice ride by the way.
SophieSleepsMA · May 26, 2006#27
Originally Posted by silverRS
So I just need to buy the ballasts and the bulbs in a kit probably.....but you think I need to retrofit my stock lights (too big) you don't think they will look good anyways?? cause theres like nothing for the Yaris yet. Nice ride by the way.
Ballasts and bulbs. That's it.
No need to retro a projector unless you feel like putting some serious effort into it.
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 27, 2006#28
^^ i have a set of 06 sienna van HID ballasts and bulbs which im gonna install when my car arrives. working at a dealership has its rewards....🙂
SophieSleepsMA · May 28, 2006#29
Originally Posted by ROCKLAND TOYOTA
^^ i have a set of 06 sienna van HID ballasts and bulbs which im gonna install when my car arrives. working at a dealership has its rewards....🙂
Awesome-O.
I wish I had perks like that.

I say, if you're at a dealership, snag some projectors and do a full-on retrofit.

Going from reflector type to projector makes a world of a difference
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 30, 2006#30
^ projectors??? which car would i use as a donor?????
corey415San Fran, CA · May 30, 2006#31
You can buy projectors from other cars. Two main different types of projectors; single and bixenon.

I dont own a Yaris, but it seems that you will want a bixenon HID projector if you want to have a highbeam.

Good bixenons include the 04+ Acura TL projectors and the e46 Bosch projectors.
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 30, 2006#32
Originally Posted by corey415
You can buy projectors from other cars. Two main different types of projectors; single and bixenon.

I dont own a Yaris, but it seems that you will want a bixenon HID projector if you want to have a highbeam.

Good bixenons include the 04+ Acura TL projectors and the e46 Bosch projectors.
IM gonna use my stock housings but i was curious as to what sophie said.......
SophieSleepsMA · May 30, 2006#33
Originally Posted by ROCKLAND TOYOTA
IM gonna use my stock housings but i was curious as to what sophie said.......
Yeah, I didn't realize the Yaris used a dual filament headlight bulb.

Listen to Corey.


So the stock bulb has 2 filaments. 1 for lowbeam and 1 for highbeam.
So if you replace this bulb with a standard HID bulb and projector, you will only get a lowbeam.

In order to get around this, you can retrofit a bi-xenon projector.
Essentially, it uses the same bulb but there is a motorized eyelid that comes up and allows light to be emitted as a highbeam when you hit the switch.

I am a fan of the acura projectors more than the BMW ones...but I guess that's more just personal preference.

There is more on this at www.hidplanet.com.
People there get really creative. Lots of great work done.
SophieSleepsMA · May 30, 2006#34
Or you can just say f it and do a normal lowbeam projector :)
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 31, 2006#35
^^ or i can just get another sienna setup for the highbeams....... i love working for toyota!
SophieSleepsMA · Jun 1, 2006#36
Originally Posted by ROCKLAND TOYOTA
^^ or i can just get another sienna setup for the highbeams....... i love working for toyota!
You'd probably have to either aim the second set high, or modify the shield inside the projector so that it did not block the light from going upwards.
07yaris_feThread starterCanada · Jun 17, 2006#37
New Question.......... please help
eight_headsLA, USA · Jun 17, 2006#38
Originally Posted by 07yaris_fe
New Question.......... please help
and the question is?
anyway... being that our headlights have to built in reflector in front of the bulb, is a projector necessary?
Chris07LBNew Jersey · Jun 17, 2006#39
Full write up coming soon...

For now, my H4 HIDs. 👏

They are AMAZING at night!

2 attachments not included in this copy

eight_headsLA, USA · Jun 17, 2006#40
what brand bulbs and ballast did you guys use? and do you guys have just low beams or are they bixenon? and any projectors?
kty75Vancouver, BC · Jun 18, 2006#41
what with the daytime light ? still there ?
TRD_YarisAustin, Texas · Jun 18, 2006#42
Originally Posted by Ryosuke
I have h4 8000k HID's in my car. It lights like a stadium 😉

Picture not included in this copy
yeah, but how's your Horizon-tal Cutoff?? how consistent is the beam pattern, is it brighter in some spots that others, how about glare being casted off of the OEM yaris reflector and plastic headlight lense? can you see the beam clearly in the plastic lense or does it emit through without any visible light diminishment...
bright as a stadium only means you're BLINDING ONCOMING TRAFFIC!!

Originally Posted by SophieSleeps
It's just an online forum man. It's like I called your baby retarded and kicked him down the stairs.

Telling someone to buy 100 dollar bulbs that will decrease your visible light is pretty stupid. If you really knew anything about lighting, you wouldn't spend 200 bucks on filtered headlights and foglight bulbs, nor would you recommend it to other people.
I agree, purchasing any bulb for the 'effect' is pretty lame. And, i think what SophieSleeps is saying about PIAA's is that they COULD be brighter IF they didn't coat the bulb with a blue film to PLEASE the ricers... if you removed that blue film you'd probably free up another 5-10% light...but PIAA makes what people wanna buy..ricer bulbs :P
The only right way to get the blue effect is an HID swap, but I SERIOUSLY don't recommend anything less than a complete swap with either a PROJECTOR setup from an OEM car (bixenons BMW, Infiniti Q45 "gatling gun" xenonsk,etc) OR a good "Casper Shield" or something to give you a good Horizontal Cutoff so that you're not blinding everyone else on the streets.

BTW, Sophie, that headlight setup on the Altezza is FARKING SWEET!!! you gotta show me how you mounted those led's for the turn signals!! Were you on Clublexus.com or Lexusownersclub.com??? I use to frequent them and used their help to modify the Q45 Xenons into my lexus GS (that already had xenons's ,haha). That IS300 looks familiar, very sweet setup..


for $35 i was able to purchase Sylvania Silverstar bulbs that not only give me much brighter, crisper, whiter light output (as opposed to OEM) and an even beam pattern, but also allow me to AVOID losing my warranty on the electric system. BTW, did you guys make sure to change out to the fuses or are you still running the same Fuse Setup from your stock headlight bulbs?? please tell me you've done your homework (Physics - Electrical to be specific) cuz if you don't you're likely to burn out your whole wiring system..try explaining that to your parents :P and Toyota's Warranty department
eight_headsLA, USA · Jun 19, 2006#43
i thought hids pulled less power and amperage than stock bulbs...?
JDMVitzT.O. · Jun 23, 2006#44
So has anyone from Canada successfully installed HIDs? I read that running the HID with DRL during the day time could really affect the longevity of the bulbs and the ballast.
Chris07LBNew Jersey · Jun 23, 2006#45
Originally Posted by eight_heads
i thought hids pulled less power and amperage than stock bulbs...?
Correct, about 35w.
Supa LaoHarrisburg, PA · Jun 23, 2006#46
I started buying some parts for my HID retrofit. I got some e46 bi-xenon projectors coming. Now all I gotta do is find some bulb and ballast for cheap. I'm trying to get all the parts I need for the retrofit before I get the car. I hope the car comes in sometime this year 🙄
Chris07LBNew Jersey · Jun 23, 2006#47
Thats a great start Supa, you are sure to have one unique setup when its finished. Me, I took the easy way out, and tested a new kit for a buddy's company, and I am VERY happy with the results!

I have HIDs on everything, from our cars and trucks, right down to the quads! HIDs rock!!!! 🤘

Here's a few more.........

4 attachments not included in this copy

Supa LaoHarrisburg, PA · Jun 23, 2006#48
That's not a bad beam pattern, Chris. There doesn't look like there's much glare above the cut off. Any more pics from farther away on a wall? Did you get a hi/low kit? Is that a 6000k kit?
Chris07LBNew Jersey · Jun 23, 2006#49
Originally Posted by Supa Lao
That's not a bad beam pattern, Chris. There doesn't look like there's much glare above the cut off. Any more pics from farther away on a wall? Did you get a hi/low kit? Is that a 6000k kit?
I was actually very suprised at how good the cutoff was, for being a non-projector housing! I did adjust the lights down just a hair (half a turn counter clockwise), just because i "thought" they might be a little high.

I do a lot of commuting, hence the purchase of this car, and at night and early morning, it is just unreal how much of the road is lit up!

You need to keep in mind, our headlights are designed to focus the light off the deflector, towards the inner side of the headlight housing.. NOT from directly in the center. My Yaris shop manual describes this all with a picture, showing how its designed, and how it all works. Maybe thats why the cut off stays so good, compared to other non-HID headlight housing retro fits.

BTW - they are actually 6500k's I am testing, but they look more like 6000ks, with just a hint of purple at warmup.
My parking lights are also LED's, being tested for the same company. Brighter then ANYTHING else we have seen on the market!
Supa LaoHarrisburg, PA · Jun 23, 2006#50
Ah...I didn't know the the light reflects from sides.
Only reason why I'm retrofitting some projectors in there is because I'm already going to open up the headlights to paint them, so I figure why I'm in there might as well add some projectors for better lighting. I've never done it before so this is going to be my first time. I'll take lots of pics for a write up.