Yarisworld Archive

AEM INTAKE ***UPDATE***

31 posts · 15,786 views

riceboyOriginal postCAN · Apr 25, 2006#1
Hey everybody,

I just wanted to update everyone about the AEM Intake, after a ton of phone calls, and a lot of running around, I have it on good authority that an AEM intake is being developed and will be released sometime in July through Toyota Canada. So anyone who's desperately waiting for one like me, will take relief in knowing that at least one is on the way. In the meantime, I guess that frees up some $$'s for other potential mod's!!

Hooray..

Replies 30

C2AUTOSPLLoma Linda, CA · Apr 29, 2006#2
I'm pretty sure INJEN, K&N, FUJITA are developing one as well. Good to know though.
mikeukrainetzCanada · May 18, 2006#3
your better off building your own cold air intake. Sure AEM, Injen etc spend a lot of time in development and testing but I never understood how anyone can justify spending the better part of 400 bucks to get like 5 hp if your lucky? A simple switch to K&N or equivalent filters and removing the lower leg of the stock airbox can net almost the same hp for 60 bucks (CAN).
Buy a header and manifold for the same price, youll be better off. Or get a shop to build an equivalent piece.
riceboyThread starterCAN · May 18, 2006#4
I'll do it through them because I get decent pricing because I use to work for Toyota. Other than that, I also don't have to worry about a single thing because it was all done by the dealer. If I ever have a problem I have someone to take the blame, and make it all better. As far as I'm concerned I'll pay for all modifications through the dealer only because I don't want a debate when it comes down to who messed up.

Yes I know intakes are simple to make, and easy to install, but I don't want the potential worry and/or hassle.
silverRSOttawa Ontario Canada · May 18, 2006#5
I just got my 4dr RS with the borls performance exhaust.....sounds really nice not to ricey, like those stupid cherry bombs....actualy sounds like there could be a V6 under the hood lol.....but I want more hp. Going to ask Toyota to see what they can order for me ie. TRD headers and intake, perhaps turbo too, then we're talking. Ant the lowering springs are worth it sits real bad ass and turns nicer.
riceboyThread starterCAN · May 19, 2006#6
The headers are about $1000 CAD,.. but I'm not sure if it's offered by Toyota dealerships directly... The intake should be out by July.. as per my source at customization. If you're looking to spend some bucks.. put in the blitz blower.. it's pretty straight forward, and there are a lot of safe installs. Apparently the reason why no turbo is offered from Toyota is because they kept blowing motors on their prototypes.. the engine just isn't built for turbo...
why?harnett county NC · May 20, 2006#7
Not from factory it isn't. But like any other engine, with enough money it can be.
silverRSOttawa Ontario Canada · May 20, 2006#8
ok so the verdict is no turbo or elso bango???? hmm......that bites....well I'll go for an intake and maybe headers when available, but not if it sets off an angine warning like I've been hearing...
why?harnett county NC · May 21, 2006#9
Originally Posted by silverRS
ok so the verdict is no turbo or elso bango???? hmm......that bites....well I'll go for an intake and maybe headers when available, but not if it sets off an angine warning like I've been hearing...
Not no turbo, but no turbo without also adding stronger engine internals. Sadly, this isn't a MkIV Supra engine.
mikeukrainetzCanada · May 22, 2006#10
Blitz and Greddy both make direct bolt on turbo kits for the Scion xB and both run around 3 grand the Blitz kit is 4 grand. From what I understand the engine will not hold up charged, besides some basic work would have to be done first to lower the compression, whether a compression reducing gasket will work for this im not sure.

There are also a few manufacturers who produce headers which will most likely bolt on to a Yaris. OBX, Megan etc. again, these are parts for the scion but Im pretty sure everything bolts up the same, you can get the headers for a couple hundred bucks.

I understand the whole warranty issue for purchasing and installing new parts theres going to be a point when either Toyota is going to cause a lot of hassle or its going to be too much of a hassle to work with Toyota. Short of blowing an engine or cutting up parts there isnt much irrepairable damage you can cause, just keep tabs.
silverRSOttawa Ontario Canada · May 22, 2006#11
i see, i see......well maybe I'll just get a set of headers and an intake, aleady have the exhaust system. Anyone forsee any engine problems with that???
birdydenton,tx · May 22, 2006#12
aem=overpriced piece of metal tubing
punchBarrie, ontario · May 26, 2006#13
Originally Posted by C2AUTOSPL
I'm pretty sure INJEN, K&N, FUJITA are developing one as well. Good to know though.
just got an email today from injen, they are working on a CAI as we speek for the sedan, and hatch
silverRSOttawa Ontario Canada · May 26, 2006#14
praise the lord or Buddha or whatever!!!! need more speed!!!
silverRSOttawa Ontario Canada · May 26, 2006#15
but Toyota isn't even one of thier manufacture options??? and no e-mail......hope your write on this
punchBarrie, ontario · May 27, 2006#16
I sent injen an email asking if they were working on the car, they replied they have one in right now..( I asked about the sedan)

We are currently doing our testing on that vehicle.

Hong Dinh
Technical Support
Injen Technology Co., Ltd
www.injen.com
(909) 839-0706 x206
(909) 839-0427 fax
hong@injen.com
silverRSOttawa Ontario Canada · May 28, 2006#17
cool well that's great news, itching to put a descent intake on my baby.
IntensePowerGilbert, AZ · Jun 28, 2006#18
New update.

Just got word, Injen is done with the protoype.👍
Chris07LBNew Jersey · Jun 28, 2006#19
Originally Posted by IntensePower
New update.

Just got word, Injen is done with the protoype.👍
Keep us posted! 👍
wlfpckChicago · Jul 8, 2006#20
ok its been a huge pet peeve of mine but... It's header.... not headers.... this car has 4 cylinders.... it has one set of Header. headers are for v6 and v8 or hemis or whatever. but not for 4 cylinder cars.


anyways... now that thats out of my system... The weakest point of the engine is the rods. with excessive boost they will snap.

there are many other paths as opposed to forced induction. For the people who are gonna be using this car as their daliy driver but just want a bit of quickness...

lightened crank pulley
milled head
intake
exhaust
header
maybe a stroker kit in the future?
fidanza 8 lbs flywheel
bored out TB...... Can be done at www.maxbore.com

stuff like this. then u can run without boost and keep it safe by running N/A
cali yarisCanoga Park, CA · May 28, 2007#21
lightened crank pulley
milled head
intake
exhaust
header
maybe a stroker kit in the future?
fidanza 8 lbs flywheel
bored out TB...... Can be done at www.maxbore.com
good list.

it may not add horsepower, but at least for the hatchback, I would add a tach to that list.
hasher22Australia Sydney · May 28, 2007#22
Originally Posted by cali yaris ↑
good list.

it may not add horsepower, but at least for the hatchback, I would add a tach to that list.
lol tach
Yaris OmegaThe Ark "Wake Me When You Need Me" · May 29, 2007#23
everybody so do you think that AEM is the best intake for the yaris
falkor_99OC · May 29, 2007#24
well i got one and its awesome, nice sound and so far it looks like i am getting better MPG
VanderkittenBerkeley, CA · May 29, 2007#25
I have the Weapon R in both of our cars and it sounds great, they actually provide a dyno sheet (does anyone else?) AND they have a "RAM AIR" kit.

OK, so the RAM AIR kit is a tube and some hose-clamps that mounts to the end of the filter and the hose goes somewhere outside the engine to pick-up "cooler air" and send it spiritedly to the intake... but it does not pressurize the intake since it is still breathing (mostly) from the sides. See my review.
YamilRSan Diego, CA · Sep 8, 2007#26
I have 12k miles on my AEM intake. Since I'm taking my car overseas I decided to change plugs and do all sorts of preventive maintenance just in case...well I was very surprised to find the filter looking almost new. I was a little worried about the location but the wheel well provided great protection, so there's no doubt to me this is a great product
redyarisOrlando, FL · Sep 10, 2007#27
Originally Posted by Vanderkitten ↑
I have the Weapon R in both of our cars and it sounds great, they actually provide a dyno sheet (does anyone else?) AND they have a "RAM AIR" kit.

OK, so the RAM AIR kit is a tube and some hose-clamps that mounts to the end of the filter and the hose goes somewhere outside the engine to pick-up "cooler air" and send it spiritedly to the intake... but it does not pressurize the intake since it is still breathing (mostly) from the sides. See my review.
+1 Weapon R here too. Cheap price and sounds fab.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Sep 10, 2007#28
WEAPON R is garbage and their price reflects it......
AstromanWenatchee, WA · Sep 10, 2007#29
I got a good deal on a gently used AEM intake from a member that needed the cash. Before that I did consider the Weapon R and Fujitsu.
redyarisOrlando, FL · Sep 10, 2007#30
Originally Posted by ROCKLAND TOYOTA ↑
WEAPON R is garbage and their price reflects it......
Let us know how you really feel. Way to add to the topic at hand. Typical from you.

Like Vanderkitten said does anyone else even offer a dyno chart backing up their product?
Chris07LBNew Jersey · Sep 10, 2007#31
Originally Posted by redyaris ↑
Let us know how you really feel. Way to add to the topic at hand. Typical from you.

Like Vanderkitten said does anyone else even offer a dyno chart backing up their product?
I didnt like my Weapon R either. From the fit, finish, and not so noticable performance gain, I removed mine and sold it.

As for dyno sheets, big deal. Any manufacturer can "tweek" dyno numbers to make their product shine. Unless you are doing your own dyno testing before and after testing, take manufacturers claims with a grain of salt.