Yarisworld Archive

whats the avg

17 posts 路 6,737 views

battleversiontcOriginal post808 路 Oct 24, 2008#1
whats the avg time it took to install the nst pulleys just trying to get a general idea

Replies 16

1NZYaris1New Zealand 路 Oct 24, 2008#2
if you don't have any problems,about an hour , also depends on the tools you have at hand ie impact gun ,ratchet spanners ect.馃憤
battleversiontcThread starter808 路 Oct 24, 2008#3
i got impact air rachet and such my dads a mechanic
m911gtChicago 路 Oct 24, 2008#4
my friend and I swapped out all three in about 1.5 hours last winter in his driveway. impact gun ftw
Smokey159Lexington, KY 路 Oct 24, 2008#5
Hey Matt, You getting the underdrive pullies?

Well, either way, do some MPG testing for me will ya? BTW, S-Techs are going on this weekend.
cali yarisCanoga Park, CA 路 Oct 24, 2008#6
about an hour - air tools strongly recommended!
YodaFL 路 Oct 24, 2008#7
:( that means i gotto buy more tools...sigh ok what do i need?
battleversiontcThread starter808 路 Oct 24, 2008#8
an hour sweet i can live with that
battleversiontcThread starter808 路 Oct 25, 2008#9
i just mine in through the mail man sweet damn cali yaris thats some fast shipping lol man thanks tho still waiting on that spoiler pricing but sweet cant wait to install it but damn the car aint here oh wells guess i gotta wait
NonStopTuningUSA 路 Oct 26, 2008#10
1 to 1.5hrs with the proper tools...

Picture not included in this copy

And then you go out and
battleversiontcThread starter808 路 Oct 26, 2008#11
i did it in an hour with air tools but was kinda of a pain for the water pump pulley tho.
mikenacaratoBrentwood, TN 路 Oct 28, 2008#12
do these require a crank pulley puller?
battleversiontcThread starter808 路 Oct 28, 2008#13
no i actually pulled it off by hand
mikenacaratoBrentwood, TN 路 Oct 28, 2008#14
awesome! definately a lot easier than the lincoln.
battleversiontcThread starter808 路 Oct 28, 2008#15
haha
AznGoukiCalgary 路 Oct 28, 2008#16
Just reserve yourself the day. Impact is not needed for any job and could end up damaging if you don't use it properly. Ratchets with lifetime warranties and a breaker bar is all you need :)
battleversiontcThread starter808 路 Oct 28, 2008#17
i actually just used an impact gun and a ratchet to loosen the belt and it was fine im pretty sure if you own an impact you know how to use it a breaker bar would require alot of muscle cause if an impact takes about 3 seconds to actually break the bolt loose i can imagine how hard it would be to hold the pulley and crack the bolt loose impacts rock no matter what you need them for