Yarisworld Archive

Wiring Cathode to dome lights?

4 posts · 6,055 views

Nexus1155Original postDorchester · Sep 10, 2007#1
Ok so I got my cathode kit from Oznium... the package came lickety split... i mean i ordered it saturday and got it monday... how ... i do not know, but i am amazed by their service... other than that... they sent me the wrong switch :( no biggie... i ordered an on/off/on but they gave on/off... this is where is leaves me


I want to wire my cathodes to be on with the door/off with the door closed/on when i have the switch on... with my switch that is not possible...

someone gave the suggestion to wire it to the dome light, but i do not know where to tap into the wiring and how to wire it like that without a switch... if anyone has any electronics experience with doing this it would be greatly appreciated... thanks alot!

Replies 3

taKutoToronto · Sep 11, 2007#2
positive wire is a 12V battery source (ignition harness has this). Your ground point will be the door trigger wire which is negative. This will give you the door on/off. But if you want to have it working with the dome, you'll have to tap the dome light negative side, and use that as your ground
the_bossMontreal Qc · Sep 11, 2007#3
off topic but where did ya get your tail lights takuto??? 😳
Nexus1155Thread starterDorchester · Sep 11, 2007#4
they are actually going to send me the correct switch with return postage for the old one, thats cool because I was going to wire them on the weekend anyways which gives it time to get here.... I can find a power post, but what color is the door light one under the dash? is there also another place to wire the 12v wire, because i have really bad luck with ignition wires(blew out an ignition switch) Thanks alot!