Yarisworld Archive

In car Audio - Head Unit installed but a little problem...

8 posts 路 5,572 views

YoyotaTarisOriginal postUK 路 Aug 5, 2007#1
Hey guys

I bought an Alpine CDE-9871R headunit and managed to get it installed and working but came across a few annoying problems.

Picture not included in this copy

This picture shows the connections to the stock Toyota head unit (tape recorder).
Could anyone please tell me what the connection to the far right is? I couldnt find anywhere to plug it in, but I suspect its the connection for the door speakers since my door speakers are not working.

If I am right about this being the connection for the door speakers, then any suggestions to how I get the door speakers working?
If I am not right about this being the connection for the door speakers, then any suggestions to how I get the door speakers working?

Thank you. 馃檮

Replies 7

punchBarrie, ontario 路 Aug 6, 2007#3
didn't you buy a toyota wiring harness ???
punchBarrie, ontario 路 Aug 6, 2007#4
ok to elimantae one conection the smaller plug is for the rear speakers only...

the larger plug the front speakers are these wires
right front positive --green wire
left front positive --- pink wire
right front negative -- blue wire
left front negative --- purple wire
punchBarrie, ontario 路 Aug 6, 2007#5
ok a quick search tells me its either for dash tweeters or for an aux item such as ipod connection, or factory cd player???
YoyotaTarisThread starterUK 路 Aug 6, 2007#6
I did buy the Toyota harness, but you can only plug the 2 middle connections to it.
There is nowhere to connect the far right connection, and since my door speakers werent working I assumed it was the door speaker connection.
punchBarrie, ontario 路 Aug 6, 2007#7
nope, they should be working that plug with 2 wires isn't for the speakers...

has someone messed with your stereo in the past, reason i ask it looks like someone used brown box tape to wrap wires???

open a door panel, and see what colour wires goto your speakers...
fnkngrvIn The Hotbox 路 Aug 6, 2007#8
The last remaining plug is for the Aux port from the factory radio, so in the instance that you really want to go DIY you could find a way to wire it up to still work to your new deck...if you are a brave soul and the new deck does have an Aux port from the rear.


THESE STATEMENTS HAVE NOT BEEN APPROVED BY THE FDA. ANY AND ALL RESPONSIBILITY LIES THEREIN WITH THE READER OF THE STATEMENTS.