Yarisworld Archive

kicker 1/0 gauge wire installed...

2 posts · 4,259 views

punchOriginal postBarrie, ontario · Jul 25, 2007#1
Well today i ran a kicker 1/0 AWG wire from the engine compartment to the trunk of my sedan... I drilled a hole near the air conditioner drain, installed the included grommet, and fed the wire through...

if you remove the plastic kick panels ( I chose the passenger side) there is a wire channel that will fit the 1/0 awg wire, all the way to the trunk completly hidden...

1. tomorrow, running RCA's front to back down the other side of the car...and the remote lead.

2. buying supplies to build a sub enclosure ( decided against a fiberglass install)

etc....

Replies 1

SiliconRaneEdmond, OK · Jul 25, 2007#2
That's Disgusting . . . Yet Awesome at the same time . . .