Yarisworld Archive

1ZZ Throttle Body Upgrade

4 posts · 24,236 views

loopoOriginal postFloyd, VA · Mar 16, 2024#1
I just got the 1ZZ throttle body from a 2005 Corolla. Part# 22030 - 0D030

It takes 4 bolts and has 2 angled hose hookups.

Do I need to swap over the black plastic rivet part of my stock throttle body onto the 1ZZ?

I have a 2008 Yaris hatchback 1.5L manual.

1 attachment not included in this copy

Replies 3

mitch9521Red Deer, AB · Mar 16, 2024#2
You don't HAVE to but some users have reported drivability issues when doing this mod that is usually fixed by swapping boards. YMMV.
loopoThread starterFloyd, VA · Mar 17, 2024#3
Okay thanks
CompeerAuckland, NZ · Mar 17, 2024#4
You will need to swap the black pastic board riveted on yes, otherwise it will throw error codes and ether not drive at all or put you in limp mode. Its an easy swap drill out rivets and swap then bolt or revite back together. You will also need to adjust the idle with the little hex screw hidden under the yellow glue.