racinkc1Original postWELDON · Nov 16, 2021#1Hello. I just bought this ATP filter kit and 4 quarts of Toyota ATF WS. Is there anything else I might need like a crush washer for the drain plug? Also wondering the filter and pan torque specs. I read somewhere on here 8FT/LB for the filter and 5.75FT/LB for the pan. Is that accurate? Doesnt seem tight enough....
Replies 2
racinkc1Thread starterWELDON · Nov 16, 2021#2 Originally Posted by Signats ↑
Cut and paste from 2007 repair manual:
Install the oil pan with the 19 bolts.
Torque: 7.8 N*m (80 kgf*cm, 69 in.*lbf)
Install the valve body oil strainer assembly onto the
automatic transaxle with the 3 bolts.
Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf)
Thanks for confirming
IndestructibleYarisHarrisburg, PA · Nov 27, 2021#3I went without the crush washer and it hasn't leaked a drop. I never replace crush washers unless there's oil on the drain plug when I start the job