Yarisworld Archive

Removing B Pillar Covers (2 DR Hatchback 2007)

11 posts · 4,503 views

PinchliteOriginal postBarrie Canada · Apr 24, 2021#1
Update to my post...

Removing & installing these two parts


--------------------------------------------------------------------------------

I just need a few pointers/tricks to remove properly.

I have come across 1 thread on removal but way too vague.

I suppose I could just pull off and if I damage /break clips then just double tape back on aswell?

I have a feeling this is rarely removed and not many have done so.

I found out technical term for the piece btw...

https://parts.gatewaytoyota.ca/oem-p...bC1sNC1nYXM%3D

Replies 10

HighmileYarisCalifornia · Jun 8, 2021#2
Just run a plastic tirm removal tool down both sides don't stress the plastic, and then work the clips from the top down because it has a tab at the bottom that slides down into the door.
PinchliteThread starterBarrie Canada · Jun 8, 2021#3
I ended up putting a crack in it.

Hardly noticable.

The old tape really holds rock solid.

Getting a new one is really quite expensive for what it is.

Getting one from a scrapper is near impossible as you will never see a yaris in a scrap yard.It will be sold as quick as it arrives.
HighmileYarisCalifornia · Jun 10, 2021#4
I didn't have much issue removing mine but it's very hot here so the adhesive is always on the softer side. Just painted them the other day they look better than new, just need to get the car painted so I can put them back on.
PinchliteThread starterBarrie Canada · Jun 10, 2021#5
I had paint done on my car aswell.Thats why I wanted to get off.

I ended up cracking one.Just going to leave it as they are over $70 CAD for 1 piece.

That double sided tape is crazy stuff.

P.S color match the emblems...thats what I did...looks real good!

Color matched the cowling aswell.
HighmileYarisCalifornia · Jun 13, 2021#6
I blacked out the badges, I think they look pretty good.

1 attachment not included in this copy

PinchliteThread starterBarrie Canada · Jun 23, 2021#7
Nice job!

So the appliques slide up or down to catch/release the tabs on backside of applique?

Can you post pic of backside of applique...and maybe the door with piece removed?

I have a new one on the way for the cracked one.

I want to take the other one off without breaking...

I will leave facing the sun on hot day before attempting.

I would really appreciate this....thanks!

BTW I got one for $37.
HighmileYarisCalifornia · Jun 25, 2021#8
Is this what you need?

3 attachments not included in this copy

PinchliteThread starterBarrie Canada · Jun 25, 2021#9
Helps big time.

Had I had this before attempting I probaly would have not broken one of them.

Whats done is done though.

I will let sit facing sun hot afternoon before attempting the other side.

Thanks again!
HighmileYarisCalifornia · Jun 25, 2021#10
If you have a wide nylon trim tool it's the best way to spread pressure without cracking it as well.
PinchliteThread starterBarrie Canada · Jun 25, 2021#11
I will get..Thanks