hey guys does anyone know if the 16 yaris radio would fit a 14 yaris?
2016 yaris radio on 2014 yaris
5 posts · 3,496 views
Replies 4
It plugs in and works fine. Done it a few times now.
Hi! Have You replaced the 2014 touch'n'go to the 2016 without CD?
No touch n go in the United States so no I haven't.
The basic radio is the same in all mk3's, Just a different face, tweeks to the software and with/without a cd deck
Be aware not all units are equal if it had/has the navigation it disables the bluetooth and USB on the main unit as it uses the ones built into the nav module instead and it communicates back to the head unit with avc lan and lvds
The hardware is the same worldwide (abite the usa gets XM and some have wifi) what is all on a secondary board
Not 100% sure but the harman modules are the same unit through the years phisically and connection wise, i cant be certian but if you add the nav module to a touch 2 it should recognize it (2012-13 units dont have a lvds plug and its wired differently)
I can get very technical with these systems as i have gathered most of the info inc wiring diagrams over the last few weeks, i also have a a touch 2 with go (gen1) and a Touch 2 with go (gen 2) on the bench, I have access to the epc so i can check part numbers and specs
I was going to post the info on here but the site seems very usa bias, there is very little info on the newer system there are are various sites about the 2012 models but nothing in depth
Be aware not all units are equal if it had/has the navigation it disables the bluetooth and USB on the main unit as it uses the ones built into the nav module instead and it communicates back to the head unit with avc lan and lvds
The hardware is the same worldwide (abite the usa gets XM and some have wifi) what is all on a secondary board
Not 100% sure but the harman modules are the same unit through the years phisically and connection wise, i cant be certian but if you add the nav module to a touch 2 it should recognize it (2012-13 units dont have a lvds plug and its wired differently)
I can get very technical with these systems as i have gathered most of the info inc wiring diagrams over the last few weeks, i also have a a touch 2 with go (gen1) and a Touch 2 with go (gen 2) on the bench, I have access to the epc so i can check part numbers and specs
I was going to post the info on here but the site seems very usa bias, there is very little info on the newer system there are are various sites about the 2012 models but nothing in depth