mik23Original postGB · Dec 30, 2018#1Hi All
Just experinced s strange thing.
Normal headlight on then tried to put on high beam then only one of the headlight is working.
Under normal conditions both headlight works.
Left low beam req replacement will do in next couple of week.
But I wasnt expecting only one headlight working in high beam
Any ideas
Thanks
Replies 10
WeeYariGeorgetown, Ontario, Canada · Dec 30, 2018#2High beam filament is burnt out.
Sent from my EML-L09 using Tapatalk
mik23Thread starterGB · Dec 30, 2018#3Thanks where is that howncan i replace that
Sent from my SM-G930F using Tapatalk
WeeYariGeorgetown, Ontario, Canada · Dec 30, 2018#4The lightbulb itself is dual filament. One filament for low and one for high beam. You need to replace the bulb.
Sent from my EML-L09 using Tapatalk
mik23Thread starterGB · Dec 30, 2018#5Hi
I have looked again
I am confused it seems the headlights are both working but one is not in high beam.
This bulb is H4
The other issue is parking light which is seperate bulb. W5W 12V wedge base type.
Thanks
Picture lost · uploads.tapatalk-cdn.comPicture lost · uploads.tapatalk-cdn.com
Sent from my SM-G930F using Tapatalk
mik23Thread starterGB · Dec 30, 2018#6Just to clarify
1 both work in normal headlight.
2 dipped position only one working
3 when on high beam one headlight is not working
Sent from my SM-G930F using Tapatalk
WeeYariGeorgetown, Ontario, Canada · Dec 30, 2018#7Swap your bulbs from side to side. If bulb is faulty, what you are experiencing will change sides.
Sent from my EML-L09 using Tapatalk
IllusionXBrossard, QC · Dec 30, 2018#8That teardrop light is not parking light. If it is, then someone has messed up with your wiring
Sent from my CLT-L04 using Tapatalk
mik23Thread starterGB · Dec 30, 2018#9Thats strange we use term parking lights for these low beam front headlights here in uk.
Can u clarify pls
Thanks
Sent from my SM-G930F using Tapatalk
IllusionXBrossard, QC · Dec 30, 2018#10That tear drop that uses a wedge type bulb is not your low beam/parking light. They are supposed to be your blinkers.
The H4 bulbs are supposed to do both your normal driving light (low beam) and high beam.
Sent from my CLT-L04 using Tapatalk
mik23Thread starterGB · Dec 30, 2018#11Got it cheers will replace the h4 swap first...
Thanks Gents
Sent from my SM-G930F using Tapatalk