Yarisworld Archive

MT Plug Crush Gasket

5 posts · 3,246 views

timbstirOriginal postUSA · Aug 28, 2018#1
I have a 2010 Yaris with a 5-speed manual Transmission. Getting ready to do a drain and fill of the tranny oil and was hoping to pick up a new crush gasket. Was wondering if anyone had a part number or anything to help me find one.

Replies 4

B.B._07YYC · Aug 30, 2018#2
If the crush washer isn't leaking now then I wouldn't worry about replacing it when you change the transmission fluid. Officially the crush washer is one time use but in reality you can reuse as long as it hasn't been over-tightened before.
bronsinnj · Aug 30, 2018#3
If the gasket is rubber coated use it. Wifes Camry with 161k has the origional drain plug gasket. No leaks.

Copper crush washers are obsolete. 👍
timbstirThread starterUSA · Aug 30, 2018#4
Good to know that the OEM gasket isn't copper trash. Service Manual says to replace so I was concerned.
tmontagueCaledonia Ont. · Aug 30, 2018#5
You should be fine reusing it like other stated. I've done plenty of drain and fills on mine and have never had any leaks and I've never replaced the washer