Yarisworld Archive

Clean wear middle of rim ?

9 posts · 10,636 views

YodaBirdOriginal postToronto · Aug 15, 2018#1
How can I clean up what appears to be burn on the middle part of the rim as seen in this image ?

Picture not included in this copy

Replies 8

SUPA DUPA 1NM · Aug 17, 2018#2
I would start with a rag and simple green. Slowly work up from there. You shouldn't have to go above a green scotchbrite pad. one thing that i know for sure is if that is the hub mating surface you "DO NOT" want to be removing material without a good mill.
YodaBirdThread starterToronto · Aug 17, 2018#3
Good mill ?
yarisugiハワイ · Aug 18, 2018#4
good mill = a good milling machine.

Yodabird, is there a reason you need to clean that particular area?
YodaBirdThread starterToronto · Aug 19, 2018#5
@yarisugi
I want too smooth it out, make it appear a little better then scratch marks as it looks now.
dogsridewithUSAnotCA · Aug 20, 2018#6
those aren't scratches...they're normal marks by the cutting tool that finished that area of the rim.
YodaBirdThread starterToronto · Aug 20, 2018#7
@dogsridewith, not those areas; the other areas which look like splotches which are worn out.
WeeYariGeorgetown, Ontario, Canada · Aug 20, 2018#8
Is that the hub side or face of the wheel? That is one shitty picture.

Sent from my Elite_5_5_Octa using Tapatalk
YodaBirdThread starterToronto · Aug 21, 2018#9
It's a close up of the face, specifically where on the rim I want to draw attention too.