anyone play with hydro-dip???
it's super fun! but it is difficult to get it right. I had to do a lot of practice dips before I felt comfortable to do my engine cover. it even has some flaws and issues, bit overall it turned out good. I did the other plastic parts too. my buddy says it looks super gay with it's rainbows and gold, but I think it looks good.
here is the before:
Picture not included in this copy
here is the part's after repainting and the dipping:
Picture not included in this copy
here they are after install. you see I covered the red "Tanabe" area with a sticker. I did not like how the red looked.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
it was fun. here is some tips:
-the bathroom fan has insufficient ventilation for dipping. (HA!)
-you don't need to wait 60 seconds to apply activator, just wait for the paper to "de-wrinkle." I had a few sink below waterline on a corner wile waiting.
-you will use more activator than it seems you need to. you pretty much have to over do it. this was my problem as I don't want to be wasteful. but if you don't spray enough, the ink will bind and you get tiny bubbles that pop and create holes in the pattern. I would do 3 or 4 cross hatch coatings, and I probably should have done 6. (really!)
-your best dip is the first dip. after the water gets activator and ink residue in it affects the following dip. I recommend doing a bunch of testers/small things, then changing water for fresh and then doing the big pretty thing.
it's super fun! but it is difficult to get it right. I had to do a lot of practice dips before I felt comfortable to do my engine cover. it even has some flaws and issues, bit overall it turned out good. I did the other plastic parts too. my buddy says it looks super gay with it's rainbows and gold, but I think it looks good.
here is the before:
Picture not included in this copy
here is the part's after repainting and the dipping:
Picture not included in this copy
here they are after install. you see I covered the red "Tanabe" area with a sticker. I did not like how the red looked.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
it was fun. here is some tips:
-the bathroom fan has insufficient ventilation for dipping. (HA!)
-you don't need to wait 60 seconds to apply activator, just wait for the paper to "de-wrinkle." I had a few sink below waterline on a corner wile waiting.
-you will use more activator than it seems you need to. you pretty much have to over do it. this was my problem as I don't want to be wasteful. but if you don't spray enough, the ink will bind and you get tiny bubbles that pop and create holes in the pattern. I would do 3 or 4 cross hatch coatings, and I probably should have done 6. (really!)
-your best dip is the first dip. after the water gets activator and ink residue in it affects the following dip. I recommend doing a bunch of testers/small things, then changing water for fresh and then doing the big pretty thing.