Yarisworld Archive

Yet another back-up camera thread...

3 posts · 2,910 views

invader166Original postLangley, BC · Oct 16, 2016#1
Hello everyone, sorry to bug you all with this, but I've been trying to figure out where i've gone wrong with wiring my reverse camera for some time now.

I just can't wrap my head around it...

I believe i've connected everyting the right way. The reverse trigger on my head-unit (purple wire with reverse tag attached) is connected to pin 22 of connector 4B of the fusebox behind the driver side dash.

The "+" suppy for the camera is connected to the same pin, and the "-" I've attached to a bolt on to the body of the car, to ground it.

When i switch to reverse, the image display on the head-unit switches to the camera, so that works, but for some reason i still have a "No Signal" message being displayed, and a completely black screen.

Where have I gone wrong? Do I need to find a different "+" ACC power supply? Does the reverse trigger wire not provide 12V+ power to the headunit when reverse is selected?

I will double check the connections again and make sure i didn't miss something.

Replies 2

kevinj93Sydney, Australia · Oct 17, 2016#2
I took the power for my back-up camera from one of the reversing lights. Do you actually have a +12V feed to the camera? i took mine from one of the reversing lights.
ern-dizCA all day · Oct 17, 2016#3
I'm gonna go get the papers, get the papers 😁