Yarisworld Archive

Headlights not working on my Caldina, help pls!

4 posts 路 5,723 views

JudgeMOriginal postAuckland, New Zealand 路 Sep 29, 2016#1
Hi all.

I bought a 1993 Toyota Caldina 2.0 (4wd petrol) a couple of months ago as a kind of a project car to learn some automotive repair/maintenance on. She's a really tired car now and has few small issues here and there

So far the biggest issue is the headlamps have decided to stop working.
Both low and high beam do not work. I think it is intermittent, because once while driving they decided to turn on for a short moment.

I have checked and tested the relay that's under the bonnet labelled 'head' and it is fine.

What should I check next ? 馃槙 parking lights are fine btw.

Replies 3

Bluevitz-rsOshawa, Ontario, Canada 路 Sep 29, 2016#2
You've checked for power at the bulbs?

Also, not sure on the wiring schematic of that car, so make sure there isn't a common ground point that's corroded or loose.
JudgeMThread starterAuckland, New Zealand 路 Sep 30, 2016#3
Power at bulbs all fine. I did a bit of more digging around, its a bit hard without a wiring diagram, I used 96 corolla diagram that's similar.

I think I've narrowed down the problem:

-Relay is good
-Dimmer switch is good
->Wiring between relay and Dimmer switch seems to be the problem. I grounded the point at the relay which is what the dimmer switch does and it lights up. I suspect loose connection in the engine room fuse box where the relay is located. I gotta go borrow some tools so I can open it up.

Does anyone have a wiring diagram for this car ? or something more similar like a Corona Wagon ?


JudgeMThread starterAuckland, New Zealand 路 Oct 9, 2016#4
Fixed it

Upon further inspection, the relay coil was not getting its ground signal from the switch. So somewhere between the dimmer switch and relay coil there is an open circuit.

aint nobody got time to open up the hole car and trace the wiring so I just added my own wiring from the dimmer switch to the relay. Headlights working fine now 馃槑