Yarisworld Archive

That would explain why the lock button and remote don't work anymore on that side

9 posts 路 5,469 views

Kar98Original postDFW 路 Feb 9, 2016#1
Picture lost 路 i.imgur.com

馃檮馃槙馃檨

Replies 8

tmontagueCaledonia Ont. 路 Feb 9, 2016#2
wish I could see what you're pic shows but it's a little big...
Kar98Thread starterDFW 路 Feb 9, 2016#3
OK, how about now :D
tmontagueCaledonia Ont. 路 Feb 9, 2016#4
much better :) how the hell did that manage to happen?
Kar98Thread starterDFW 路 Feb 9, 2016#5
More importantly, how do I fix that. All the damn dealer-installed aftermarket stuff I have on there is freaking shoddy I wish it weren't there in first place so I could do it properly.
nortonfbmotown 路 Feb 9, 2016#6
You can add bend/slight curve to the rod. If there is enough of the rod
protruding through the bracket you could drill a hole and add a cotter pin.
Kar98Thread starterDFW 路 Feb 9, 2016#7
I was thinking JB Kwik, but your idea is good also 馃憤
CTScottUSA, CT 路 Feb 9, 2016#8
There isn't much slack in that cable. JB wouldn't hold, but a crimp splice might,
Kar98Thread starterDFW 路 Feb 10, 2016#9
Meh. Fixed it so I can at least lock and unlock that side with the keys or with the remote. The inside lock button is without function for now. But it looks like I could loosen that little black Allen screw a bit and pinch both ends of the broken cable in there. If I care enough to fix it to rip the damn door card off again. Meanwhile I'll drive a "free candy" Yaris, I guess ;)