Kdaddy81Original postAlbany, NY · Sep 19, 2015#1How to replace the engine tranny mount on 08 Yaris auto sedan. I did the top pass side mount and rear tourque mount. Just got the one left...
Where is it located and about how long to swap out I'm good w cars I just like to ask and know ahead of time.
Thanks in advance
Keith
Replies 7
tmontagueCaledonia Ont. · Sep 19, 2015#2Remove the intake and battery and it's right below.
Kdaddy81Thread starterAlbany, NY · Sep 19, 2015#3Awesome thanks for responding
Kdaddy81Thread starterAlbany, NY · Sep 24, 2015#4Any tips or tricks for this mount job? I'm gonna tackle it tomorrow when my wife gets home from work.
Thanks in advance!
KTSTrinidad and Tobago · Sep 24, 2015#5To do this you don't need to raise the car I did this with my Vitz RS parked in my driveway.
Remove the intake air box - Philip screw driver and 10mm socket with and extension.
Remove battery and battery tray - 10mm and 12mm
Support the tranny - Toyota scissors jack should do just fine.
Remove the mount - about 5 14mm bolts and the 19mm bolt and nut that goes thru the mount.
It is not a difficult task. I rate it's difficulty similar to changing the out two mounts.
Approximate time is about 1hr from start to finish and less if you have done it before.
Kdaddy81Thread starterAlbany, NY · Sep 25, 2015#6Doesn't sound bad. The hard one was the rear for me. This sounds pretty straight forward!
Thanks for replying!!!
Kdaddy81Thread starterAlbany, NY · Sep 25, 2015#7Should I do this mount as well after I do the driver side one and is it hard to do? The other two were not that bad..
Picture not included in this copy1 attachment not included in this copy
Kdaddy81Thread starterAlbany, NY · Sep 27, 2015#8Picture not included in this copy All done! Car doesn't make any viberation noise or clunks into gear after doing 3 mounts. Thanks for the help! Very much appericated! Really I mean that, very helpful people here.
God bless
-Keith
1 attachment not included in this copy