Yarisworld Archive

40mm Lowering Springs :D

7 posts 路 3,720 views

MedMantleOriginal postSouth Africa 路 Jul 11, 2015#1
Finally decided to buy the 40mm lowering springs that are produced locally here in SA. I took pictures of the whole install but unfortunately most of them got lost in Blackberry land :/

I am still busy with the front side because the allen key we used in the install snapped of in the tower screw 馃嵒 annndd night came sooner than usual and I have no garage. So if all goes well and half my car hasn't been stolen by the morning I'll have some good footage of the after (sadly only 1 before picture wasn't corrupted) 馃憥

Evo Tuning Lowering Springs
Picture not included in this copy

Before
Picture not included in this copy

Had to remove everything to get to the broken allen key..
Picture not included in this copy

Allen Key twisted right off
Picture not included in this copy

Front STOCK and Evo Tuning springs
Picture not included in this copy

First strut ready for install tommorow :D
Picture not included in this copy

6 attachments not included in this copy

Replies 6

MedMantleThread starterSouth Africa 路 Jul 12, 2015#2
I am done and the result was better than I expected! Amazing handling feel especially at speed and over bumps. No scraping or rubbing and obviously a much nicer fender gap (especially rear) :D

40mm makes a big difference especially when you wanna clean the roof I discovered 馃檶

Picture not included in this copy

**And I thought painting the calipers was hard** :P
Picture not included in this copy

Picture not included in this copy

Loving it yo'
Picture not included in this copy

Picture not included in this copy

Thanks to this amazing forum for inspiring me and teaching me everything I know so far 馃憤

5 attachments not included in this copy

fourbangingfunMA 路 Jul 12, 2015#3
How did you tint your tail lights? They look awesome.


Sent from my iPhone using Tapatalk
ern-dizCA all day 路 Jul 13, 2015#4
Looks good 馃憤

Just enough to look proper, but could be mistaken for stock. I dig that.
hondajtUnited States 路 Jul 13, 2015#5
Where did you buy them?
MedMantleThread starterSouth Africa 路 Jul 13, 2015#6
Thanks guys! :D The stock look is what I'm after (which is why I removed my projectors and painted my headlights slightly). I bought them from a South African company called Evo-Tuning who are mainly involved with the Mitsubishi Lancer stuff. http://www.autostyle.co.za/ << Here's the distributor I bought them from. They got some other stuff for the Yaris as well but not much.


The tail-lights are a mix of Lamin-X and PlastiDip, so it seems dark but all the bits where the light shines through are just smoked tint so light output isn't really affected AND it's temporary if I ever want to remove it :)
MedMantleThread starterSouth Africa 路 Jul 13, 2015#7
What it seems like **
Picture not included in this copy

With light shining directly on it
Picture not included in this copy

With lights on!!
Picture not included in this copy

It was an experiment because originally I just wanted a light tint to give the red the cherry red look 馃檮

3 attachments not included in this copy