ZombieCreature77Original postNew York 路 Jul 6, 2015#1When trying to tighten a nut on the upper part of the alt bracket it snapped and left what seems like a bolted in bolt ( trying my best to explain but you'll see in pic with red line. Anyone have any idea the name of this bolt that goes into the engine, It looks like i could get it out because there's a nut holding it down to the engine.
馃槙
Replies 5
CTScottUSA, CT 路 Jul 6, 2015#2There is not a nut on the inside. That is a bolt which has threads on both sides of the hex head that sits against the block. I can't seem to find it in the parts catalog.
ZombieCreature77Thread starterNew York 路 Jul 6, 2015#3do you think that bolt is available for purchase?
CTScottUSA, CT 路 Jul 6, 2015#4Yes. As long as the parts department person can find it. Some parts are really tricky to find in the EPC.
ZombieCreature77Thread starterNew York 路 Jul 6, 2015#5Just took a look in the catalog online, nothing..
CTScottUSA, CT 路 Jul 6, 2015#6If you can get it out, you can simply use a bolt with a few washers to replace it.