Yarisworld Archive

Using Torque Pro to read stock wideband?

2 posts · 2,792 views

Caramanos2000Original postPuerto Rico · May 12, 2015#1
Do you guys think the torque pro app will properly display the AFR from the cars stock wideband sensor? 😁

Replies 1

willieGqld · May 13, 2015#2
I just started using the torque pro app.

AFR seems to read around 14/1 unless I go foot to the floor it goes to 18/1 ....- ish

altho at idle it shows the throttle being open 17% and foot to floor is reading at 81%.

At idle it shows fuel flow at 9cc/min and WOT at around 4500rpm about 270cc/min

I'm not sure if the app is accurate but it's fun to think that it is