scod4025Original postSacramento · Feb 7, 2015#1Hello to all
Well After much research (manly from this Forum) have begun to modify my 2012 Yaris LE HB
The first Install so far was the aFe intake and the Micro Image Intake Manifold
Had a slight issue with MAF not fitting the aFe intake but little bit of sand paper and that was fixed. So far only have about 5 days of to and from work on it but there is a noticeable increase in power at lower rpms, Have a crap-o-matic so don't know in what range but still loving it.
Thanks to Jeff at Micro Image for help that was provided and listening to my dumb questions and I will be calling back when bonus shows up next week for the Tanabe Cat back and headers
Now if only there was Semi-Automatic tranny that would fit this thing
Yes I would convert to a manual if was able to but needs to stay as automatic for DMV purposes for now
On this note I have been looking and it seems only one person has done the TB change over with a Third Gen Yaris and had some issues was wondering if any one else had done this as well and did or didn't have issues looking for one now but trying to figure out what to look for as to problems
Replies 54
WorkTLSoCal · Feb 7, 2015#2Any pics?
invader166Langley, BC · Feb 10, 2015#3Track car, Yay! :D
scod4025Thread starterSacramento · Feb 10, 2015#4ok so only have after pictures had thought that it was a pretty easy install so didn't do any pictures
but here they are
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Here is one of the things that bothers me so will need to do some modifying to my cover but works for now
Picture not included in this copy
The air manifold came with spacers to lift the cover up so wouldn't rub on the manifold but don't like the way it looks so going to pull my dremal out but that can wait
and Just noticed this
Picture not included in this copy
Hose is touching will see if can twist that hmmm... anyways
Picture not included in this copy
Picture not included in this copy
Hope you like and next few Install's will get pictures taken while doing the install
scod4025Thread starterSacramento · Feb 11, 2015#5ok so added some after pictures but need to get approval or something the redirect was to fast for me to see what issue was
scod4025Thread starterSacramento · Feb 11, 2015#6Picture not included in this copy
AH HA I win got one picture to upload will do more later
scod4025Thread starterSacramento · Feb 12, 2015#7Ok have the TB to install so my weekend is set[IMG]Picture not included in this copy[/IMG]
scod4025Thread starterSacramento · Feb 19, 2015#8scod4025Thread starterSacramento · Feb 19, 2015#9I had a shop do the work, I wasn't going to do it that way but it was on the rack and he gave me a really good price for the work.
So it is now all 2" from the resonator back My new exhaust guy had to cut the connection off the Tanabe muffler because it had 1"3/4 pipe 👎 to connect to my old pipe which became 2"
I will be installing DC headers this weekend
axiomColorado · Feb 19, 2015#10I really want to do the MI Intake Manifold, but have not bit the bullet, the price seems so high. I have the 1ZZ TB so really should be doing this.
scod4025Thread starterSacramento · Feb 19, 2015#11It is worth it. I have lost a little in my MPG but lots of low end umph
Edit: Should state that the loss of MPG may or may not be from the fact that my foot seems to have gotten a bit heaver. I don't speed per say, just like to get up to speed faster then everyone else around me
WorkTLSoCal · Feb 19, 2015#12Did the car run fine after the manifold install. I might buy this next, will this give you any problems at the smog place?
scod4025Thread starterSacramento · Feb 20, 2015#13Had no problems with the intake manifold after install. um don't know about smog but I keep all of my factory pieces just incase it's a real easy install like 45mins and I'm back to stock
axiomColorado · Feb 20, 2015#14Damn it, look what you made me do. I ended up ordering the MI Intake Manifold.
scod4025Thread starterSacramento · Feb 20, 2015#15🎉🤘
scod4025Thread starterSacramento · Feb 25, 2015#16Ok so started looking into my next mod, Light weight pulleys, fly wheel etc...
and came across some disturbing post so was wondering if there is still issues with the pulleys and such or where these few and far between. Or do you guys think there is a Different Mod I should be looking into
Also have the question of should I Go with a 10% undersize or stick with OEM size.
Trying to scrape out every little bit of HP with out adding F/I (YET)
WorkTLSoCal · Mar 1, 2015#17I would just go with the MicroImage pulley. I noticed the car revs quicker and don't have to worry about it cracking.
WorkTLSoCal · Mar 1, 2015#18Did you get the TB to work?
scod4025Thread starterSacramento · Mar 1, 2015#19Yes and no It bolted right in but then the aFe intake coupler was a little small and it was hitting the bolts so pulled it all out and put in allen head cap bolts and removed the spacer nut on all the brackets that hold coolant line and wire for TB and seems to be working but don't like the way the wire bracket is sitting might cause a leak in the future also flipped the coolant line bracket around so now my hose doesn't rub against the CAM( see pics for this issues)
Also have a rough Idle for 20 or 30 min but once the car gets to good temp then it goes away(yes I have the high idle for 30sec at first start to) I've been adjusting the Idle screw but cant seem to get it right but will keep playing with it
WorkTLSoCal · Mar 1, 2015#20Do you notice a increase in hp?
fnkngrvIn The Hotbox · Mar 1, 2015#21The stock diameter pulley would be the way to go. The intention of the underdrive had been to deliver as much as possibpe since the mod doesn't necessarily give a ton of return on a stock setup. The MI version has been constructed with a better design than the NST and since it is stock size it will not mess with the charging system. This is especially important if you add additonal electrical demand....for example a couple amps to drive an audio upgrade, Heated seat kits, etc. NST doesn't even make a set anymore I do not believe for thw Yaris community and he never answered me when I attempted to talk to him in the last couple years.
scod4025Thread starterSacramento · Mar 2, 2015#22I noticed a little increase in HP but the biggest difference was the throttle response that got much quicker which was noticeable to me during freeway driving, was able to accelerate so much faster at speed
But... if you haven't done your exhaust you will know it. When I lifted my foot could feel the restrictive flow. Felt like the car was down shifting, this got less pronounced when I went to 2" pipe from the resonator. But its still there ever so slightly think I need to remove resonator. Wish I didn't need the cat but, poor me I live in California 👎 and I would never think of doing anything against the law 😎
fnkngrvIn The Hotbox · Mar 2, 2015#23You bring up the point I have been trying to make for years. The pulley swaps may not net you any real power gains, but they get you into the powerband a hell of a lot quicker which translates to better performance and then conversely is totally worth it. It makes the butt dyno happy.
scod4025Thread starterSacramento · Mar 2, 2015#24😆👍
So with that said will be getting the Pulley this month. Love that quick feel.
or the 😳 isn't that car a gas saver
axiomColorado · Mar 8, 2015#25So, I just installed the MI intake manifold. Are those spacers for the head cover or to move the radiator hose away from the manifold tubing? I was able to use the stock nuts and bolts to put the head cover back on.
scod4025Thread starterSacramento · Mar 9, 2015#26To tell you the truth I am unsure, I believe they could be used for either. I used them to lift my cover up off the intake manifold(I could have used stock nuts and bolts but it was touching), but I believe that they could be used for the hose as well, but I just flipped the hose bracket around and it gave me about 1/2" of clearance from the manifold. But I did also remove the stock bolts from around the TB and put in 6mm cap bolts so deleted the nuts that hold the bracket down, which if your still using would give you a little bit more space then what I have
scod4025Thread starterSacramento · Mar 15, 2015#27Ok so spent all morning on it but finally got the TB dialed in right went from a fluctuating idle to a nice smooth one finally and was at 23mpg while it was off but with the driving I do jumped back up to 27mpg
Have yet to get the cash together for the new pulley so that is on hold for now
scod4025Thread starterSacramento · Mar 23, 2015#28Car is going on the Dyno tomorrow to see what my numbers are but think I'm still running a bit rich because of the TB but will get to see what all the bolt-ons have done
LTHatchNewark NJ · Mar 23, 2015#29Very nice! Can't wait to see what it puts down, any chance you can run 91 in it with a reset?
scod4025Thread starterSacramento · Mar 24, 2015#30I would but since I started bolting on its had nothing but 91 in it so wouldn't have an 87 base line for you but will post up the 91 numbers
scod4025Thread starterSacramento · Mar 25, 2015#31ok here are my numbers
Picture not included in this copy came out as 103.4 WHP
and had to run it a bit rich to get that number I leaned it out and then I couldn't break 100 oh well good baseline to start from
LTHatchNewark NJ · Mar 25, 2015#32Dang those are good numbers for an auto! How did you add fuel(i didn't see any engine management mentioned in this thread)?
scod4025Thread starterSacramento · Mar 25, 2015#33its kind of a cheat but with the TB you can adjust the idle stop and if you do it while the car is still running it screws with the ECU learning for a throttle use but only one time shot and only get a little bit of adjustment
ucsmfuvancouver, BC · Mar 27, 2015#34was the intake easy to install ?
Installing mine next week :P
scod4025Thread starterSacramento · Mar 27, 2015#35It was for me. If your mechanically inclined most of the stuff I installed is a fast and easy install, If not will take a little bit longer but everything is straight forward so should be able to figure it out. I also removed the mounting bracket that the stock air box sat on (MAP sensor is zip tied to it) so could get AFE a bit lower and then was able to get AFE bolted to the battery bracket and front frame for stability they didn't mention removing it in the instructions they sent
fnkngrvIn The Hotbox · Mar 27, 2015#36Higher octane doesn't give more power it just prevents detonation. Only mention this for people that are unaware. Kind of rare to have reasons for an NA build with stock compression to require an increase in octane rating.
scod4025Thread starterSacramento · Mar 27, 2015#37Yes just getting myself use to price so when the S/C goes on wont have to alter budget
but I do notice a bit in my mpg maybe a .5 to it that's why I run it
scod4025Thread starterSacramento · Apr 7, 2015#38Ok so not much to report as my funding is low do to taxes but got board and remove the rear seat and spare tire/jack
LTHatchNewark NJ · Apr 7, 2015#39Thank you for the correction my good sir fnkngrv, scod4025 how far are you going with the weight reduction? Any pictures of it gutted?
scod4025Thread starterSacramento · Apr 8, 2015#40I'm Planning on stripping it as far as I can but still owe a little on it so keeping what I do easily reversible for now, but also looking at doing a full custom interior that I can remove for when its play time (Basically a show car that I can race) and I will get some pictures of the striped back seat in a bit (have to wait till break)
scod4025Thread starterSacramento · Apr 25, 2015#41Crank Pulley bought and installed!!!
and just a heads up the DIY for this seems to be gone but easy to figure out but really recommend an impact wrench with torque settings to do this install on a automatic fought it for like ten minutes then got the air hose out and solved the problem
scod4025Thread starterSacramento · May 16, 2015#42LTHatchNewark NJ · May 16, 2015#43That's awesome! Are you going to remove the seat brackets, seat belts as well? Any chance you can weigh the pieces you removed? I just want to verify my scale is right, rear seat delete with brackets and all seat belts, 60ish lbs off.
scod4025Thread starterSacramento · May 17, 2015#44Hmm now I will have to weigh them as feels heavier then 60lbs.
Thinking about removal of belts but need to install seat once a month so if it is a pain to install them again probably wont but have gotten good at getting seat in and out so might be the same with practice,
on that note is there a torque requirement that anybody knows about for belt anchors or is it just till its tight
LTHatchNewark NJ · May 17, 2015#45Removal of the seat belt is easy, those steel seat brackets take longer to install then the seat belts. Until its tight works fine for me, i'm sure there's a torque spec for it maybe someone can post it if they know.
scod4025Thread starterSacramento · May 29, 2015#46Ok so did one better got my car on a scale so with full tank car weight 2320
But with this scale rounds up to the next ten so if it was 2311 still would be 2320
it was 2490 with me in the car and I was upset as been aiming for 170 for weeks
will go back with some 1 lbs and will get right weight
Sent from my SM-G386T using Tapatalk
scod4025Thread starterSacramento · Jul 6, 2015#47scod4025Thread starterSacramento · Jul 6, 2015#48scod4025Thread starterSacramento · Jul 6, 2015#49But with all that said have a slight issue as when I removed the back door panels the rear windows stopped working so need to jump one of the wires in the plug to get them to work again and would like to know if anyone *cough* CTScott *cough* may know which ones I need to jump or have the diagram of the door panel if not will find it just take me a little bit with a meter. Here are pictures, if anyone needs more info let me know
[IMG]
Picture not included in this copy[/IMG]
[IMG]
Picture not included in this copy[/IMG]
CTScottUSA, CT · Jul 6, 2015#50Red to yellow and green to black.