Yarisworld Archive

Rear Brake Adjusters

3 posts 路 5,288 views

toastOriginal postNappanee, IN 路 Dec 29, 2014#1
Ok I just don't see what I'm doing wrong here, but the adjuster arm just doesn't quite hit the star wheels to keep them in place. I've got everything in place per the diagram but there is about a 1/16th of an inch gap on both. I did them one at a time so I know I didn't switch them. Do I need to tweek the arms with a needle nose plier to get them to hit or is there something else I'm missing. Getting tired of having to pull the wheels every couple of months to have rear brake performance. Thanks.
馃し

Replies 2

CueBallUtah 路 Dec 29, 2014#2
Perhaps installed the adjusting pin backwards? 馃し
Hard to tell exactly what you mean without a pic.
toastThread starterNappanee, IN 路 Dec 29, 2014#3
Possibly Cueball. I'll check that and try to get a pic next time I have the wheels off.