Yarisworld Archive

Shifter cage bushings?

6 posts 路 6,506 views

Caramanos2000Original postPuerto Rico 路 Dec 3, 2014#1
Ok, first of all I want to know if the bushings on the shifter and the cage for the 2nd gen and 3rd gen are the same? I was looking at pictures of the cage bushings and pricing, they work out to around $40 shipped to me. Couldn't such a simple part be made out of a few stainless washers and some pvc pipe? After all, all the solid bushings do for the cage is give it solid feet per say, couldn't I accomplish the same thing with $4 in pvc, bolts and washers? 馃榿

Replies 5

CoryMWhite Rock BC 路 Dec 3, 2014#2
Not sure if they are the same but so long as you can get the shifter cage bolted securely, that's all that matters. I didn't notice that big of a change when I did mine, but my cage bushings were still in good shape.
Cheers.
Caramanos2000Thread starterPuerto Rico 路 Dec 3, 2014#3
My car doesnt even have 10k on it yet but I have extended the shifter by 3" so im concerned the added strain is causing extra flex, what are your thoughts?
CoryMWhite Rock BC 路 Dec 4, 2014#4
It's really up to you. If you are a typical driver who just needed the extension to drive more comfortably, I'd suggest not worrying about it. If you want the extension and the best viable shifter feel, then go for shifter bushings, SSK, cage bushings (in that order of importance).
Cheers.
mr_milesPortland, OR 路 Dec 4, 2014#5
They will fit a 3rd gen. I'm using them right now on mine. I like the feel :)
cali yarisCanoga Park, CA 路 Dec 4, 2014#6
washers will be a cheap solution, but not the same as solid bushings.

I would do the cable bushings first, they have more of a "feelable" effect than the cage bushings.

You can even bolt your cage to the floor for FREE with no bushings at all - but you lose a little height.