ajkochev74Original postUtah · Oct 25, 2014#1If you've put a aftermarket tach or other gauge in your car, I'd like to see it on your dash in a picture. Thinking about getting one myself but don't know where to put it
I've been looking at these:
http://www.amazon.com/Auto-Meter-150...teering+column Anyone use one or similar, there are two gauge ones as well.
I've also thought about getting a OBD 2 HUD, several on ebay, which projects gauges into the windshield but most reviews are not to favorable.
Replies 6
mitchell12St.John's, Newfoundland, Canada · Oct 25, 2014#2The thing about OBD2 based stuff in regard to gauges is our cars do not have oil pressure senders, They only have an oil pressure switch. Meaning you geat no useful information about oil pressure. Oil pressure and an actual water temp gauge are the only extras I really want in my NA car. ( I have a tach already being a Canadian car)
ezhacker1San Francisco · Oct 25, 2014#3HUDs are cool looking idea, but yeah the reflection sucks. I use Torque app (OBD) on a tablet installed to monitor sensors.
ajkochev74Thread starterUtah · Oct 30, 2014#4Thanks for the replies so far. I would still like to see a few photos of aftermarket gauges installed. I was under the impression several here had installed a tach.
I'd personally want a 2" one. Has anyone installed gauges on their pillars using something like this?
http://www.amazon.com/GlowShift-Univ...productDetails whooppee777Maryland · Nov 10, 2014#5Gauges in A pillar from top to bottom; Tach, Boost/Vacuum, Volt. Steering column gauges Water Temperature, Oil Pressure (water temp gauge has since been replaced with an AME wide band air/fuel ratio gauge) Blitz Rvit above rear view mirror. All gauges are Glowshift.
Picture not included in this copy1 attachment not included in this copy
mario98cPuerto Rico · Nov 15, 2014#6Prosport Premium Series 60mm Water temp and Oil Press.
Picture not included in this copy
MittelklasseBangkok, Thailand · Nov 16, 2014#7UltraGauge EM
Picture not included in this copy