JDM::RSTLESSOriginal postLondon, UK · Aug 16, 2014#1Replies 8
ExiwolfmanWasaga beach · Aug 16, 2014#2in the second pic it looks like the sensor is sitting sideways so air flow maybe not direct.
JDM::RSTLESSThread starterLondon, UK · Aug 16, 2014#3Thanks , the sensor is the same position as it was on the stock air filter box
ilikericesavannah, ga · Aug 16, 2014#4Also, the diameter of the pipe needs to be the same as the OEM. If the diameter is larger, it affects the airflow value the sensor is picking up. I can't tell in the picture, but if the relocation of the sensor doesn't work, it may be the diameter of the pipe
ExiwolfmanWasaga beach · Aug 16, 2014#5Hmmm never had that problem could be ...my intake is larger than stock made out of 3 I had around lol
sent from my S4 on Mars
JDM::RSTLESSThread starterLondon, UK · Aug 17, 2014#6Just had a look at the original position of the MAF on the stock air box and its downwards compared to the pic above. May be the issue but if that doesnt work, any other suggestions?
Thanks for suggestions so far guys!
CrankyOldManWest Michigan · Aug 17, 2014#7What is the diagnostics code? It's much easier to pinpoint with those than just a general "check engine" light.
JDM::RSTLESSThread starterLondon, UK · Aug 17, 2014#8Sorry mate, how do u get the code?
Sent from my iPhone using Tapatalk
CrankyOldManWest Michigan · Aug 17, 2014#9I'm not sure if there are car parts stores in the UK, but over here in the colonies we have stores that will read the codes with an OBD II scan tool for free. If not, a repair garage should be able to.