Yarisworld Archive

Rumble when applying brakes

2 posts · 4,892 views

CB900F2Original postToronto · Aug 15, 2014#1
Hey guys

I replaced my pads (oem) with a set of beck rotors last year and I have developed a bit of a rubble in the car when I apply the brakes, but it only happens between 60km to 50km hour when I am slowing the car down...

I don't feel any pulsing in the peddle, but the car will rubble a but only at that speed...

I don't think it's an issue with the rear drums as i had the issue before and after as i recently replaced my shoes and rear drums...

Thanks guys


Sent from my Z10 using Tapatalk

Replies 1

jack blacksoutheast USA · Aug 17, 2014#2
I had that in my RAV4 recently (although at much lower speeds) and it turned out pads were wearing unevenly and the slide pin showed some abnormal wear. I assumed from lack of lubrication. I lubed the pin with silicon grease and it helped so far. But I don't have much followup on this.