Yarisworld Archive

2" drop, need camber?

15 posts · 5,369 views

kropekoiOriginal postPhilippines · Mar 14, 2014#1
Hi All!

I just got a new set of lowering springs, 2" drop.

My wheels are 17x7.5 Keiichi Tsuchiya Mags DTM, not sure the offset though

Do I still need a camber kit?

Replies 14

G-AmmoThe Netherlands · Mar 14, 2014#2
No :) You'll get a nice tight fit! Also depends on the tyres you have.
cali yarisCanoga Park, CA · Mar 14, 2014#3
If you are asking because you have some rubbing, can't say without knowing the offset and tire size.

Is some other reason you're asking?
kropekoiThread starterPhilippines · Mar 16, 2014#4
Not really sure about the offset, 40-45? Tires 205/40/17
Bluevitz-rsOshawa, Ontario, Canada · Mar 16, 2014#5
how much room is there between the back of the tire and the strut?
kropekoiThread starterPhilippines · Mar 17, 2014#6
not experiencing some rubbings yet, but, the gap between the tire and the fender is 2 fingers, my mechanic says that it will get lower and lower in time since its just a fresh install of the springs....
G-AmmoThe Netherlands · Mar 17, 2014#7
True.. but itll lower about 1 cm max :) not more... so you'll really have a nice fit! if you have rubbing inside the fenders... u might get some spacers (if you rub when steering)
JumpmanYarisSO. INDIANA · Mar 17, 2014#8
You shouldn't need camber for 2"
kropekoiThread starterPhilippines · Mar 20, 2014#9
thanks all!
cali yarisCanoga Park, CA · Mar 20, 2014#10
Springs will settle 1/8" to 1/4" but only in the first week or two. After that, they will stay the same height for the life of the spring. Especially if you bought a good quality, brand name spring.
FlushYarisPortland, OR · Mar 21, 2014#11
No you wont need camber. I run 17x8.25 +25 and with the 2" drop I had about 3-4 fingers of wheel gap. I have 195/40s though..
Bluevitz-rsOshawa, Ontario, Canada · Mar 21, 2014#12
It would also depend on what tire brand you use as well. Some tires have a lip to protect the rim which ads width to the tire.