Yarisworld Archive

turbo question

8 posts · 5,291 views

Sway84Original postToronto Ontario Canada · May 4, 2007#1
i was curious to know how much everyone spent on their turbo or how much it would cost

Replies 7

SabretoothSt Cloud FL · May 4, 2007#2
Just remember that cost = quality in this case, you could spend 3 grand and get a decen turbo kit or spend 4 grand plus and you can get a great turbo kit with many extras...Look up ZPI, do a search, or wait for TurboYaris to post, hes our custom Turbo pioneer. www.ZPIracing.net


Also look into Blitz Superchargers, if your keeping an open mind on what you want.
turboyarisSouthern New Jersey · May 4, 2007#3
time to chime in i guess hahaha. I will be talking to kenny this weekend at carlisle but their intentions were to release their turbo kit in the 3k range. You will also need an upgraded clutch which they do offer as well. I'm not sure what kind of extras sabretooth thinks he will get as well, but the zpi kit comes with everything you need to bolt up and go aside from like i mentioned the clutch. The turbo kit will come with injectors a tuned emanage intercooler piping intercooler and exhaust manifold and turbo as well as blow off valve and wastegate. The only thing you may need after that is a midpipe I'm not sure about the downpipe connection to the stock pipe. But you don't want a turbo car with a 1" exhaust anyways.
so all told
figure 3500 for the turbo kit maybe not sure what ZPI will come out with + 400 for the clutch+ the cost of an exhaust= total cost a little over 4k
turboyarisSouthern New Jersey · May 4, 2007#4
and thats if you install it all yourself
dngzvancouver · May 4, 2007#5
how big of an exhaust is necessary
spkrman2 · May 4, 2007#6
i'd imagine a 2" would definitely help the zpi kit?
dngzvancouver · May 4, 2007#7
nice so i wont have to change my exhaust?!! SWEEET

so since i have to upgrade my clutch, i guess i should wait on installing my flywheel too..

edit: i already changed my exhaust to 2"
turboyarisSouthern New Jersey · May 4, 2007#8
for the power levels 2" is probably fine, I believe that was the size ZPI was eventually going to go with for their exhaust. Mine is 2.5". and yes i would wait and do your clutch and flywheel at the same time.